Funky Phil Posted April 1, 2014 Report Share Posted April 1, 2014 Spit at it... And gave it dirty looks! hahaha Link to comment Share on other sites More sharing options...
stariondreams Posted April 1, 2014 Report Share Posted April 1, 2014 Finally hit 200 miles changed my oil and filter now time to start tuning into boost! whoat! Link to comment Share on other sites More sharing options...
87redcat Posted April 2, 2014 Report Share Posted April 2, 2014 Before...http://i1314.photobucket.com/albums/t563/originalmoxiecat/Mobile%20Uploads/IMG_20140301_154214_121_zpsnuxtlzqx.jpg After...http://i1314.photobucket.com/albums/t563/originalmoxiecat/Mobile%20Uploads/IMG_20140401_124506_835_zpsp4p30hmw.jpg Cleaned up the battery box area and cleaned all the contacts in there Link to comment Share on other sites More sharing options...
CarlosFley Posted April 2, 2014 Report Share Posted April 2, 2014 Attempted to bleed my brakes today but it started to rain. Went back inside and the sun came out. Went for a second attempt and it started raining again. F it. Link to comment Share on other sites More sharing options...
psu_Crash Posted April 2, 2014 Report Share Posted April 2, 2014 Pulled it out of the basement and squeegee'd the floor for about an hour.It was sitting in about an inch of standing water ... NFG! Link to comment Share on other sites More sharing options...
Ironside Posted April 2, 2014 Report Share Posted April 2, 2014 Walked by and rubbed its @$)(, oh yea. Link to comment Share on other sites More sharing options...
87redcat Posted April 3, 2014 Report Share Posted April 3, 2014 Took my 87 out for a ride around the block. Stumbled like crazy cause the vac advance is shot... Link to comment Share on other sites More sharing options...
randy Posted April 3, 2014 Report Share Posted April 3, 2014 Today i looked in the the car, and decided to look under the carpet on the drivers sidebecause i was getting water on that side. I noticed that the metal edgeing on the carpetwas rusted so i pulled back the carpet, and discovered some rust there so i tucked itbacked and closed the door until i get that area addressed. Link to comment Share on other sites More sharing options...
87redcat Posted April 3, 2014 Report Share Posted April 3, 2014 Ya know.... I dont feel so bad now that I know a lot of you guys do the same thing I do... Look at it and walk away.lol Link to comment Share on other sites More sharing options...
Shelby Posted April 3, 2014 Report Share Posted April 3, 2014 well it wasn't really some thing I done , but my g-daughter did , she bought another 90 Eclipse , now who goes on hold the 88 - 89 Conquest or the 94 - 90 eclipde , I gota bad feeling that I'm goina leave here with a couple cars not fineshed Link to comment Share on other sites More sharing options...
Alsandr Posted April 4, 2014 Author Report Share Posted April 4, 2014 Before...http://i1314.photobucket.com/albums/t563/originalmoxiecat/Mobile%20Uploads/IMG_20140301_154214_121_zpsnuxtlzqx.jpg After...http://i1314.photobucket.com/albums/t563/originalmoxiecat/Mobile%20Uploads/IMG_20140401_124506_835_zpsp4p30hmw.jpg Cleaned up the battery box area and cleaned all the contacts in there That is beautiful... How did you do it? Link to comment Share on other sites More sharing options...
Edde Posted April 4, 2014 Report Share Posted April 4, 2014 well it wasn't really some thing I done , but my g-daughter did , she bought another 90 Eclipse , now who goes on hold the 88 - 89 Conquest or the 94 - 90 eclipde , I gota bad feeling that I'm goina leave here with a couple cars not fineshed From The Dept of No S#$% Link to comment Share on other sites More sharing options...
CarlosFley Posted April 4, 2014 Report Share Posted April 4, 2014 Finally bled out all the gunky 25+ year old brake fluid Time to test them out on some wet corners Link to comment Share on other sites More sharing options...
Shelby Posted April 4, 2014 Report Share Posted April 4, 2014 Finally bled out all the gunky 25+ year old brake fluid Time to test them out on some wet corners now what could the result of such a thing be Link to comment Share on other sites More sharing options...
duckheads Posted April 6, 2014 Report Share Posted April 6, 2014 Got the plug soldered on the 87 that is for the steering wheel controls and got the radio and bezel all back together. Finally it all works after two years! Need to get some front tires for the 8's I have polished up and I can get my set of shp's on. Link to comment Share on other sites More sharing options...
Xtclink Posted April 6, 2014 Report Share Posted April 6, 2014 Installed rear interior and hatch area with girlfriend. Picked threw the best pieces and washed each individually. Handed her shelbys fsm on the correct page and told her get busy Link to comment Share on other sites More sharing options...
SOTTY Posted April 6, 2014 Report Share Posted April 6, 2014 today i blew my turbo Link to comment Share on other sites More sharing options...
LSQuest88 Posted April 6, 2014 Report Share Posted April 6, 2014 Replaced dim old dome light bulb to new much brighter led square strip. Also took her out for a cruise. Midwest weather was finally cooperating. Link to comment Share on other sites More sharing options...
87redcat Posted April 6, 2014 Report Share Posted April 6, 2014 That is beautiful... How did you do it? thank youremoved all the components I could (and then some) have these industrial wipes from work. cut grease like a charm. cleaned up some rust spots, treated them with rust converter, taped off and covered everything and shot some white rustoleum on it. cleaned up everything else and put it all back together. Link to comment Share on other sites More sharing options...
87redcat Posted April 6, 2014 Report Share Posted April 6, 2014 Oh and last 2 days didnt even see either of the quests. worked till midnight both days. they dont happen often but 18 hr days suck... esp together like that... Link to comment Share on other sites More sharing options...
sellerfeller Posted April 6, 2014 Report Share Posted April 6, 2014 so in january thinking heat would be nice, this is what i ended up with.... http://www.imagehostplus.com/v2/usr/1853/IMG_24711396768722418.jpg ...for about two and a half months. thursday i finally repaired the foot/face actuator with the zip tie & silicone fix and replaced the heater core hose and heater core.... with help from the forums... thanks!!!http://www.imagehostplus.com/v2/usr/1853/IMG_24011396768423250.jpghttp://www.imagehostplus.com/v2/usr/1853/IMG_24291396768446140.jpg http://www.imagehostplus.com/v2/usr/1853/IMG_24261396768458291.jpg was planning on replacing steering coupler but it was ok though need a center link. friday and saturday replaced leaking PS box & PS pump with reconditioned units along with new flexible PS high pressure line, fuel line, heater hoses, belts, fluids, heat wrap on downpipe, repaired broken turbo suport mount... had to tilt the motor again for this lol. but she's back together for now with heat and air blowing out of the correct vents properly and working power steering. took her out for a little fun and tuning... fun was had, then blew a coupler that i had to force partially back on a few times to ease back home since all tools were at the house... even the handy multi-tool lol. Link to comment Share on other sites More sharing options...
chassispuke Posted April 6, 2014 Report Share Posted April 6, 2014 got my fiji back on the road again , new lifters and this time no unexpected oil leaks Link to comment Share on other sites More sharing options...
Edde Posted April 6, 2014 Report Share Posted April 6, 2014 Ok I did something yesterday. I put air in one rear tire that was beginning to go flat. But I did put new Akebono pads and nice rotors on the volvo. Link to comment Share on other sites More sharing options...
RonnieJ Posted April 6, 2014 Report Share Posted April 6, 2014 (edited) Washed the POS. Might do my new water pump tomorrow Edited April 6, 2014 by RonnieJ Link to comment Share on other sites More sharing options...
KT Posted April 7, 2014 Report Share Posted April 7, 2014 (edited) Got the D2s on the front. Edited April 13, 2014 by KT Link to comment Share on other sites More sharing options...
Recommended Posts