Speedy2222 Posted November 21, 2013 Report Share Posted November 21, 2013 Noted,,,but pretty sure it won't be too bad. do note i am a cnc machinist by trade also Quote Link to comment Share on other sites More sharing options...
TexasQuest Posted November 21, 2013 Report Share Posted November 21, 2013 Rear diff mounts & TT mounts Quote Link to comment Share on other sites More sharing options...
schaffman Posted November 21, 2013 Report Share Posted November 21, 2013 I am still in for the TT bushings Quote Link to comment Share on other sites More sharing options...
ZacMan Posted November 21, 2013 Report Share Posted November 21, 2013 Sign me up for: Suspension bushesDiff MountsTorque Tube MountsNylon Shifter Bushing Will make payment as soon as I get these 83 tails refurbished and sold :-). Quote Link to comment Share on other sites More sharing options...
JohnnyWadd Posted November 21, 2013 Report Share Posted November 21, 2013 write me in for the bolts . but I really want the plates and tri brace Quote Link to comment Share on other sites More sharing options...
questsale Posted November 21, 2013 Report Share Posted November 21, 2013 Do you have a vac oven? What do you do to get the settling bubbles out of the rubber ones poured? Quote Link to comment Share on other sites More sharing options...
SOTTY Posted November 21, 2013 Report Share Posted November 21, 2013 Still in Quote Link to comment Share on other sites More sharing options...
quikconq Posted November 21, 2013 Author Report Share Posted November 21, 2013 (edited) Do you have a vac oven? What do you do to get the settling bubbles out of the rubber ones poured? Whatever Steve uses will be used,,,he never mentioned a vac oven tho.The details haven't been gone over yet. Edited November 21, 2013 by quikconq Quote Link to comment Share on other sites More sharing options...
RonnieJ Posted November 22, 2013 Report Share Posted November 22, 2013 Im in for 1 Suspension set and 1 Torque Tube Quote Link to comment Share on other sites More sharing options...
kev Posted November 22, 2013 Report Share Posted November 22, 2013 I'm in for the following: (1) tranny mount(2) shifter bushings(1) engine mount set kev Quote Link to comment Share on other sites More sharing options...
questsale Posted November 22, 2013 Report Share Posted November 22, 2013 Whatever Steve uses will be used,,,he never mentioned a vac oven tho.The details haven't been gone over yet. I only ask because I made some home made poly engine mounts for another car, and when they set there were a lot of air bubbles which lead to cracking. I was told by other folks who did the same thing to use a vac oven for the mix to get rid of any air, and then let it set in a vac chamber/oven as well to minimize any air and cracking.But this is a home made method, so I dont know how yours is done. Quote Link to comment Share on other sites More sharing options...
quikconq Posted November 23, 2013 Author Report Share Posted November 23, 2013 I only ask because I made some home made poly engine mounts for another car, and when they set there were a lot of air bubbles which lead to cracking. I was told by other folks who did the same thing to use a vac oven for the mix to get rid of any air, and then let it set in a vac chamber/oven as well to minimize any air and cracking.But this is a home made method, so I dont know how yours is done. Ill talk to Steve about it. Thanx Quote Link to comment Share on other sites More sharing options...
quikconq Posted November 23, 2013 Author Report Share Posted November 23, 2013 Also guys the more quickly I get deposits,the quicker this will move along. I have to order the ureathane. I guess I'm gonna need a crap ton of clamps,For the molds. And a good belt sander. And other stuff. And possibly stuff we havent even talked about,possibly a vac/oven. Thanx guys I'm just excited to get this movin. Bryen Quote Link to comment Share on other sites More sharing options...
Jetspd150 Posted November 23, 2013 Report Share Posted November 23, 2013 Hi quikconq!!! Any chance you can get steve to reproduce the upper rear hatch hinge rubber pieces in poly???;Everyone seem to forget about these. It was me who suggested the torque tube bushing way back when to be made; because everyone forgot about these as part of the suspension rebuild. MK1 started it but never came through then steve pickup on them later I believe.The torque tubes are now produced but the rear hatch bushing are not. See if you can get Steve to look into this it should be simple for him to do. Many thanks. Quote Link to comment Share on other sites More sharing options...
DSMconquest Posted November 23, 2013 Report Share Posted November 23, 2013 I'm still interested in suspension bush,diff mount and TT mount Quote Link to comment Share on other sites More sharing options...
huero Posted November 24, 2013 Report Share Posted November 24, 2013 Im interested in the short throw shift kit. Not too worried about the delay. I want more, but cant swing it now. So hopefully you keep these things running. Thanks for stepping up and making it happen. Quote Link to comment Share on other sites More sharing options...
Potamus Posted November 24, 2013 Report Share Posted November 24, 2013 (edited) Ok I'm in I want suspension bushings, diff mount, TT mount, trans mount, nylon shifter bushing. Thanks Edited November 24, 2013 by Potamus Quote Link to comment Share on other sites More sharing options...
quikconq Posted December 2, 2013 Author Report Share Posted December 2, 2013 Molds have been paid for,,and plan to call Steve tuesdayish. He said he didn't think shipping is gonna be an issue,,as I said beforeAlmost everything is already on a pallet. Unless he decides to ship another route. Looking to buy the ureathane this week. Quote Link to comment Share on other sites More sharing options...
kidjc Posted December 2, 2013 Report Share Posted December 2, 2013 Wanted to wish you the best in this endeavor Brian! It's a big step, the best of luck to you my friend! Quote Link to comment Share on other sites More sharing options...
quikconq Posted December 2, 2013 Author Report Share Posted December 2, 2013 Also note:::::: the orders will be processed in the order of full paymentReceived. Thanx guys Bryen Quote Link to comment Share on other sites More sharing options...
quikconq Posted December 2, 2013 Author Report Share Posted December 2, 2013 Wanted to wish you the best in this endeavor Brian! It's a big step, the best of luck to you my friend! Hey Jerry. Thanx man,greatly appreciated. Not sure how it'll work out financially,,obviously not gonna get rich. Not really looking too. Just trying to keep these things available at a reasonable price. If "3sx" would have bought them I'm sure there would have been a price hike. And the availability of the shifter probably would have been lost. Bryen Quote Link to comment Share on other sites More sharing options...
scott87star Posted December 2, 2013 Report Share Posted December 2, 2013 Paid. Quote Link to comment Share on other sites More sharing options...
wrngwae Posted December 2, 2013 Report Share Posted December 2, 2013 ^^^^^ ditto, paid in full. now get to work Brian,lol. Hit me up if you need anything. Quote Link to comment Share on other sites More sharing options...
aconro Posted December 2, 2013 Report Share Posted December 2, 2013 Paid in Full.Thanks! Quote Link to comment Share on other sites More sharing options...
quikconq Posted December 2, 2013 Author Report Share Posted December 2, 2013 Today's email from Steve . And shipping is a lot more than I was hopeing. Ohh well "We'll get them packed up today and expect to use UPS. What is the confirmed shipping address?" Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.