eldos Posted July 5, 2007 Report Share Posted July 5, 2007 Here is the story. Had the Turbonetecs T3/T4 (Topend kit) installed and ran great! Later, started to run PIG Rich. So, I wen't for a MPI setup with a computer. Found out that what happened was that I riped the inter cooler open at one of the mounts. Got "Chad's intake", Mustang TB and Injectors. Never could get my computer to take the timing right, so never ran it. Now I am parting it out cheep. Don't have time because of work for this car. Picture of the parts http://www.esnips.com/web/Parts4sale Chad's intake w/ MSD 72 lbs/hr and Mustang TB $800 shipped in US.Turbonetecs T3/T4 Internal w/ MAS, intake Pipe and old K&N filter $800 Shipped in US.Thanks, Steve Aurora, CO Quote Link to comment Share on other sites More sharing options...
Funky Phil Posted July 5, 2007 Report Share Posted July 5, 2007 what ex manifold? Quote Link to comment Share on other sites More sharing options...
eldos Posted July 5, 2007 Author Report Share Posted July 5, 2007 It was a converted stock manifold by top end. Has stress cuts between runners, so there is less chance of it from cracking. It now takes a Garret type turbo mount. It was also ported out by them for better flow.Steve Quote Link to comment Share on other sites More sharing options...
randomguy Posted July 5, 2007 Report Share Posted July 5, 2007 that is a sick intake manifold at a good price, if i wasn't so deep into the progress of mines I would've definitely taken that up... hrm but I can always sell what I got so far [/thinking] Quote Link to comment Share on other sites More sharing options...
eldos Posted July 5, 2007 Author Report Share Posted July 5, 2007 And you don't need to wait 2mo. for it to get built. :wink: Steve Quote Link to comment Share on other sites More sharing options...
jtmuncher Posted July 5, 2007 Report Share Posted July 5, 2007 may be interested in the intake parts... Quote Link to comment Share on other sites More sharing options...
bboutlaw Posted July 6, 2007 Report Share Posted July 6, 2007 Here is the story. Had the Turbonetecs T3/T4 (Topend kit) installed and ran great! Later, started to run PIG Rich. So, I wen't for a MPI setup with a computer. Found out that what happened was that I riped the inter cooler open at one of the mounts. Got "Chad's intake", Mustang TB and Injectors. Never could get my computer to take the timing right, so never ran it. Now I am parting it out cheep. Don't have time because of work for this car. Picture of the parts http://www.esnips.com/web/Parts4sale Chad's intake w/ MSD 72 lbs/hr and Mustang TB $800 shipped in US.Turbonetecs T3/T4 Internal w/ MAS, intake Pipe and old K&N filter $800 Shipped in US.Thanks, Steve Aurora, CO hay steve can you call me at 210-648-4295 h or 210-393-7455 c :twisted: :twisted: bobby b Quote Link to comment Share on other sites More sharing options...
substock Posted July 6, 2007 Report Share Posted July 6, 2007 i love that intake.wish i was just starting my mpi swap rather then just completing it Quote Link to comment Share on other sites More sharing options...
eldos Posted July 7, 2007 Author Report Share Posted July 7, 2007 As of right now, BOTH are still for sale. Steve Quote Link to comment Share on other sites More sharing options...
mstieg Posted July 7, 2007 Report Share Posted July 7, 2007 Decent price on the intake package. Injectors: about $200 shippedTB: $40-$100manifold: worth $600 at least Post some pics for these guys if you can. Chad's work is art. Whoever gets it should be happy. (of course I have yet to use mine) Quote Link to comment Share on other sites More sharing options...
eldos Posted July 7, 2007 Author Report Share Posted July 7, 2007 Chads Intake $750+ shipping + 2mo wait MSD injectors $93.70 each + Shipping (Summitracing)TB was $55 + ShippingExtra fittings $25Pressure reg $50 (Bosh Adjustable w/ boost)Thats around $1250So $800 is goodSteveAurora, CO Quote Link to comment Share on other sites More sharing options...
golden87 Posted July 7, 2007 Report Share Posted July 7, 2007 I sent a PM I live in colorado also! Quote Link to comment Share on other sites More sharing options...
knightrider Posted July 7, 2007 Report Share Posted July 7, 2007 Interested in turbo setup, PM'edRyan Quote Link to comment Share on other sites More sharing options...
eldos Posted July 7, 2007 Author Report Share Posted July 7, 2007 Turbo- Pending -Intake - Still for sale Steve Quote Link to comment Share on other sites More sharing options...
eldos Posted July 9, 2007 Author Report Share Posted July 9, 2007 -=Update=-Turbo- Still for sale Intake - Still for sale Steve Quote Link to comment Share on other sites More sharing options...
10secgn Posted July 10, 2007 Report Share Posted July 10, 2007 will this intake work on a magna head? Quote Link to comment Share on other sites More sharing options...
Chad Posted July 10, 2007 Report Share Posted July 10, 2007 yes, as long as you use the magna gasket. Quote Link to comment Share on other sites More sharing options...
h2oskeez Posted July 11, 2007 Report Share Posted July 11, 2007 Sorry I'm just getting back into the starquest scene after buying back my '87 after seven years. Will this work with the ac compressor?? If so you may have it sold. Thanks. Quote Link to comment Share on other sites More sharing options...
Tim_C. Posted July 11, 2007 Report Share Posted July 11, 2007 firm PM sent for intake set. Quote Link to comment Share on other sites More sharing options...
Chad Posted July 11, 2007 Report Share Posted July 11, 2007 Yes, it is 100% AC compatable. Quote Link to comment Share on other sites More sharing options...
eldos Posted July 11, 2007 Author Report Share Posted July 11, 2007 -= Update =-Intake - PendingTurbo - Still for sale. Other stuff I have that I am willing to sellMSD DIS2 w/ 91 Eclipse coil pack (Waste spark ignition set up) 86' flat side 5 lug wheels and tiresTransmission 88' ECU and knock box88 InjectorsTEP Craler street cam Quote Link to comment Share on other sites More sharing options...
slowquest Posted July 11, 2007 Report Share Posted July 11, 2007 Let me know if Tim doesn't get the intake. I'll be interested. Quote Link to comment Share on other sites More sharing options...
golden87 Posted July 11, 2007 Report Share Posted July 11, 2007 The intake looks great guys. I went and saw it in person and you really cant ask for more then that. Its all together and Chad i must say that is some excellent craftsmanship. Steve is a good guy and easy to work with good luck on this purchase ladies and gents. Quote Link to comment Share on other sites More sharing options...
eldos Posted July 12, 2007 Author Report Share Posted July 12, 2007 -= Update =-Intake - Sold - Tim_C Turbo T3/T4 - Still for sale. Take a closer look at how big it is compared to the pop can. Quote Link to comment Share on other sites More sharing options...
eldos Posted July 13, 2007 Author Report Share Posted July 13, 2007 = Update =-Intake - Sold - Tim_CTurbo T3/T4 - Pending. Steve Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.