ad130 Posted September 2 Report Share Posted September 2 I am looking for a 240mm flywheel, preferably lightened. I bought an ACT clutch and pressure plate and it is the 240mm so I decided to try to get the flywheel to match. Any used ones out there or pointing me in the right direction for options is appreciated. Thanks! Quote Link to comment Share on other sites More sharing options...
1SICDSM Posted September 5 Report Share Posted September 5 check starquestparts.net he should have one.lightened be hard to find.i have an act great clutch Quote Link to comment Share on other sites More sharing options...
techboy Posted September 5 Report Share Posted September 5 I know of another person in the club here looking for one of these, they can be difficult to find. Quote Link to comment Share on other sites More sharing options...
tux Posted September 6 Report Share Posted September 6 I had my flywheel machined to lighten it. It's always an option Quote Link to comment Share on other sites More sharing options...
HemiEVO3 Posted September 6 Report Share Posted September 6 If you still have your 225mm, you can have it lightened at a machine shop as well as have it re-drilled for a 240mm pressure plate. That will be the cheaper and easier option 1 Quote Link to comment Share on other sites More sharing options...
ad130 Posted September 7 Author Report Share Posted September 7 Do you know where I would get that done? I'm in Iowa and called every machine shop in town asking about lightening the flywheel and nobody said they would do it. Any help is greatly appreciated pointing me towards someone that would do it. Quote Link to comment Share on other sites More sharing options...
TexasQuest Posted September 8 Report Share Posted September 8 Fidanza makes a lightened flywheel but they are pricey. Quote Link to comment Share on other sites More sharing options...
HemiEVO3 Posted September 16 Report Share Posted September 16 ad130 - If you're in distress I can probably find a solution. Used but good flywheels are available but will be around the $300+ range after shipping and especially after surfacing if it needs it. The shops you called probably won't touch lightening the flywheel for liability purposes, but if they won't resurface it or redrill it, they are flat-out incompetent and would not be worth your money anyway. I've been around for a while. I'm not a huge name, but trusted in the community. If you're in dire need and this is a viable solution, ship me your flywheel and I will take it to my local machine shop for resurfacing, re-drilling, and possibly to lighten it as well. They typically charge me $40-60 for a resurface with a few days turn-around. Good old dudes. 2 Quote Link to comment Share on other sites More sharing options...
1SICDSM Posted Thursday at 12:12 PM Report Share Posted Thursday at 12:12 PM starquestparts.net has an aluminuim flywheel Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.