nc_beagle Posted February 5, 2024 Report Share Posted February 5, 2024 My project car is missing the wiper fluid cap. It will be a while before it's even drivable but I wonder if these caps are relatively universal? Quote Link to comment Share on other sites More sharing options...
TexasQuest Posted February 5, 2024 Report Share Posted February 5, 2024 Not sure about other Mitsubishi models. The factory one has long been discontinued MB337860. Quote Link to comment Share on other sites More sharing options...
tux Posted February 5, 2024 Report Share Posted February 5, 2024 Could 3d print one. Should be easy to design as it's kind of really just a circle Quote Link to comment Share on other sites More sharing options...
techboy Posted February 6, 2024 Report Share Posted February 6, 2024 I can probably make one pretty easy. Although I am in the middle of 2 projects for BKB94 right now. Let me take a peek at it. Quote Link to comment Share on other sites More sharing options...
nc_beagle Posted February 6, 2024 Author Report Share Posted February 6, 2024 10 hours ago, techboy said: I can probably make one pretty easy. Although I am in the middle of 2 projects for BKB94 right now. Let me take a peek at it. Thanks. It's months from being needed so I'm in no hurry. Can you 3D print wiper cowls too? 😁 They seem ok now, but apparently are prone to breaking. Quote Link to comment Share on other sites More sharing options...
tux Posted February 6, 2024 Report Share Posted February 6, 2024 motocam360 or mksmotorsports has them Quote Link to comment Share on other sites More sharing options...
techboy Posted February 6, 2024 Report Share Posted February 6, 2024 3 hours ago, nc_beagle said: Thanks. It's months from being needed so I'm in no hurry. Can you 3D print wiper cowls too? 😁 They seem ok now, but apparently are prone to breaking. I don't think anyone can 3D print wiper cowls. You would have to have a machine with a really large base plate. Most of the largest 3D printers I've seen are 18" beds. I have 5 machines at my disposal, and I think the largest bed is 12 inches wide. Wiper cowls need to be injection molded by a plastics company. Tux is right ... Motocam and MKS both have them. If you need them, I'd jump on them b/c you never know how many they have left and that's usually and item that needs to be batch ordered. Quote Link to comment Share on other sites More sharing options...
nc_beagle Posted February 9, 2024 Author Report Share Posted February 9, 2024 Thanks all. On the wiper cowls, any thoughts on how to visually restore them? Meaning they've faded a bit. Is it better to try to repaint them (removing them first) or use one of the many plastic restore products? Quote Link to comment Share on other sites More sharing options...
BKB94 Posted February 9, 2024 Report Share Posted February 9, 2024 SEM bumper black. It has the adhesion promoters in it that are needed for plastic parts. 1 Quote Link to comment Share on other sites More sharing options...
techboy Posted February 9, 2024 Report Share Posted February 9, 2024 I repainted mine with Dupicolor black trim and bumper cover paint. I've used it a bunch of times on various things and it's always worked pretty well. 1 Quote Link to comment Share on other sites More sharing options...
TexasQuest Posted February 11, 2024 Report Share Posted February 11, 2024 On 2/6/2024 at 7:48 AM, nc_beagle said: Thanks. It's months from being needed so I'm in no hurry. Can you 3D print wiper cowls too? 😁 They seem ok now, but apparently are prone to breaking. Starion Conquest wiper cowl - Motocam360.com 1 Quote Link to comment Share on other sites More sharing options...
techboy Posted February 11, 2024 Report Share Posted February 11, 2024 Beagle ... let me give this a print tomorrow at work and try it out on my car. I'll keep you posted. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.