hunter85 Posted November 1, 2014 Report Share Posted November 1, 2014 On my 87 starion I was noticing the crank pulley is wobbly around the pully for the alt/water pump the belt itself is tight and it runs fine but im sure thats not rite is it? It wiggles from front to back around 1 cm doesnt do it while running but I can wiggle it by hand when its off. Just checking to make sure I have a problem before I buy a new one thanks Travis Link to comment Share on other sites More sharing options...
mopar jon Posted November 1, 2014 Report Share Posted November 1, 2014 Yes, you have a problem, my 87 also separated and i replaced it with one from a 83, bolted, no more issues. Link to comment Share on other sites More sharing options...
scott87star Posted November 1, 2014 Report Share Posted November 1, 2014 It's about to fall apart, wish new ones were available. Link to comment Share on other sites More sharing options...
Dad Posted November 1, 2014 Report Share Posted November 1, 2014 http://www.ebay.com/itm/MK1-CRANK-PULLEY-WITH-EDIS-TRIGGER-WHEEL-STARION-BLUE-/141207061644?hash=item20e098c48c&vxp=mtr Link to comment Share on other sites More sharing options...
BC_99 Posted November 1, 2014 Report Share Posted November 1, 2014 You might want to be sure it is the pulley coming apart and not crank walk from a worn out thrust bearing. BC_99 Link to comment Share on other sites More sharing options...
hunter85 Posted November 1, 2014 Author Report Share Posted November 1, 2014 Yay me........ There are 3 left to buy of these as a heads up I like the blue but it was exp thanks Link to comment Share on other sites More sharing options...
hunter85 Posted November 1, 2014 Author Report Share Posted November 1, 2014 Only the one pulley wheel wiggled looks like they werent one peice like they should have been^^ Link to comment Share on other sites More sharing options...
Preludedude Posted November 1, 2014 Report Share Posted November 1, 2014 Sorry to hijack, but my crank pulley bolt keeps coming loose? Is loctite ok to use on it? And what to torque it down to? Link to comment Share on other sites More sharing options...
importwarrior Posted November 1, 2014 Report Share Posted November 1, 2014 I used blue loctite. Link to comment Share on other sites More sharing options...
TexasQuest Posted November 1, 2014 Report Share Posted November 1, 2014 Just picked one up to go with my MK1 billet water pump & alternator pulleys. Link to comment Share on other sites More sharing options...
Recommended Posts