i need to know where the wires come out of the engine harness for the intake air temp sensor. i know that the connector A on the computer pin number 17 is the correct pin for the ovcp intake temp but i cant find the wiring to go to the sensor in the engine bay...

I know DAD has a write up on how to repair your own fuels lines and oil cooler lines but can't find anything about repairing P/S lines. Is it the same? Is the pressure that much more? Thanks     http://www.starquestclub.com/forum/index.php?showtopic=125941

I have been having trouble with an oil leak found my dipstick keeps pushing out I need a long block I don't have the time to re ring mine right now has to be near ct I don't want to pay a hefty shipping charge

I just finished installing a new non jet valve head, Ajusa gasket, and arp studs on my 87 starion. Rebuilt the throttle body, and did pretty maximal vacuum deletes based on write ups found here.   The injectors are not stock and require spacers in the TB to accommodate their increased height.   The car has a dead miss now that is unaffected when #2 and #4 plug wires are removed although they are both getting plenty of spark.   Can you guys give me some ideas of where to start looking?