Ran The Balcony yesterday at willow springs raceway with 626drift. Had a blast for the most part. I was having trouble with tires though, came up on a bunch of brand new but old tires and couldn't get many laps out of them with out the separating.. like HUGE chunks. so weird, never seen it happen before but was super frustrating. By the time I got kinda comfortable ona set they would let go... Did get to wring out the new race version of d2 coils, very happy with them, so nice to have so mu

Once again are these tail lights which I took apart and took the red lenses out. These would be great for an LED project or to refurbish and put red lights or other stuff inside or spray tint on the inside of the lenses. I hope someone can use these. They will take minimal work to clean up, spray a chrome paint or apply reflective tape or what have you on the inside, and heat them in the oven to re-glue them together.   20 bucks covers shipping, and that's all I want.   http://i.imgur.com/ZgWq0.

I don't want to get into details, but a curb destroyed my oil pan and crossmember. I need a good crossmember with the passenger side lower control arm and a good oil pan. Not as urgent but I also would like buy a set of front spindles and a fog light harness (just the little one). Let me know what you've got, Im in Houston Texas so the closer the better for the big stuff. Thanks, Mark

Okay, so I'm going to continue searching the threads but, I may need some assistance here.   I'll try to be as brief and descriptive as possible.     -Derpy started developing really bad hesitation at low RPM and would try to die at idle   -Seems to run fine at full throttle or in the upper RPM   -Replaced plugs and wires and cleaned MAF, seemed to help with idle issue somewhat.   -Still getting pretty bad hesitation after driving it for a few hundred feet between 2000 and 3500 RPM (estimating)