www.starconquer.com   anyone have any experience with them? I found them through a link on a Starion page on cardomain - and he's got headers....

Ok I installed my ST springs on the front without a problem, happy with the look. Now I've gotten around to the rears. I pulled the stock springs off and lined up the ST spring, then I put the top strut plate on and there is about 1/4 of an inch space between the top of the spring and the top strut plate, that isn't gonna fly. Anyone know what's up with this? That spring will be able to just bounce around freely because it's not secure at all. These are the older ST springs that are grey in colo

http://www.southeastdrift.com/forum/viewtopic.php?t=1150   okay okay - I know its in a 240... but STILL - how plausible is it for the Starquest ( only probably with a retractable LCD screen )

What type of fitting are people using for under the t stat housing? Im guessing just an elbow copper fitting? I think this is where the lower heater hose is going.   I pulled one off the stock intake, its just a straight accross fitting with a barbed end, but it has a tiny pipe that teas off, i foget what this was doing on the stock setup...