Wakeman17 Posted July 10, 2012 Report Share Posted July 10, 2012 yes they are with 1.25" spacers in the front and 2" spacers in the rear Link to comment Share on other sites More sharing options...
starquestJOE Posted July 10, 2012 Report Share Posted July 10, 2012 Are they 15" or 16"? I have three 15x7 0 offset, and lookin for a fourth Link to comment Share on other sites More sharing options...
Wakeman17 Posted July 10, 2012 Report Share Posted July 10, 2012 16x10 not sure the offset Link to comment Share on other sites More sharing options...
patra_is_here Posted July 13, 2012 Report Share Posted July 13, 2012 what size tire are you running on those? also, if they are true three piece you can get new shells made so you dont have to run spacers and you can change size? Link to comment Share on other sites More sharing options...
Wakeman17 Posted July 14, 2012 Report Share Posted July 14, 2012 In the picture I have 215/55. They now have 205/50 so not as much rubber and they are stretched a bit. I'll post pics. Also I like the spacers gives it a wider look. Link to comment Share on other sites More sharing options...
89BananaQuest Posted July 15, 2012 Report Share Posted July 15, 2012 Hey guys i have a set of 18x9's wheels with a 30+ off set..... Right now im running rear 8's with a 32mm spacer does any one know what it would take to get the new wheels to fit or sit as close to flush as possible? I would be ok with some poke also just dont want a ton of poke. Link to comment Share on other sites More sharing options...
D_Venable Posted July 15, 2012 Report Share Posted July 15, 2012 Hey guys i have a set of 18x9's wheels with a 30+ off set..... Right now im running rear 8's with a 32mm spacer does any one know what it would take to get the new wheels to fit or sit as close to flush as possible? I would be ok with some poke also just dont want a ton of poke. 25-30mm spacer up front, and a 55-60mm spacer out back to get close to where those 8's are, a little too big of a spacer out back in my opinion Link to comment Share on other sites More sharing options...
Wakeman17 Posted August 4, 2012 Report Share Posted August 4, 2012 5 Stars http://i1180.photobucket.com/albums/x411/wakeman171/IMAG0355.jpg Link to comment Share on other sites More sharing options...
Fuze Posted August 7, 2012 Report Share Posted August 7, 2012 5 Stars http://i1180.photobucket.com/albums/x411/wakeman171/IMAG0355.jpg Dope rims, same color as my car too. Looks tough. Funny, I even have one of those "you like this" sticks, but didn't put it on. LOL Link to comment Share on other sites More sharing options...
garystewart Posted August 10, 2012 Report Share Posted August 10, 2012 Just got my 2010 GT500 wheels in. 18x9 +30 and 18x10 +24. No tires yet. Trying to figure out what size and what spacers I need. http://i1040.photobucket.com/albums/b408/iamtinter/fe2ca375.jpghttp://i1040.photobucket.com/albums/b408/iamtinter/5ad17e6e.jpghttp://i1040.photobucket.com/albums/b408/iamtinter/deae1655.jpghttp://i1040.photobucket.com/albums/b408/iamtinter/27c31c87.jpg Link to comment Share on other sites More sharing options...
randy Posted August 11, 2012 Report Share Posted August 11, 2012 Those wheel are bangin. Link to comment Share on other sites More sharing options...
garystewart Posted August 11, 2012 Report Share Posted August 11, 2012 Cruzinconcept had them on sale. $450 shipped. Couldnt pass that up. Link to comment Share on other sites More sharing options...
polarisman14 Posted August 11, 2012 Report Share Posted August 11, 2012 Yeah gotta love their deals. It doesn't look too bad but we need a true side shot to see. What kind of fitment are you looking for? That's the same (I think?) specs my 17s have on them and I am running 1.25" spacers all around right now. I'm stepping up to 1.75 in the rear since my fenders are rolled. Link to comment Share on other sites More sharing options...
garystewart Posted August 11, 2012 Report Share Posted August 11, 2012 I just want them flush as possible and I'll be rolling the fenders and dropping it a little. Anyone know if 295/30-18 will fit the rear? Link to comment Share on other sites More sharing options...
DurbenQuest Posted August 13, 2012 Report Share Posted August 13, 2012 http://i69.photobucket.com/albums/i51/cowcowmoo/580996_409649082416229_1889710923_n.jpghttp://i69.photobucket.com/albums/i51/cowcowmoo/325856_10151331451272575_1484704900_o.jpghttp://i69.photobucket.com/albums/i51/cowcowmoo/221503_10151331308957575_794238531_o.jpg Link to comment Share on other sites More sharing options...
demonquest22 Posted March 29, 2013 Report Share Posted March 29, 2013 XXR 526 Front's 17x9 35+ offset with 38mm spacers tires 235 40's Rear's 17x10 20+ offset with 38mm spacers tires 245 40's Link to comment Share on other sites More sharing options...
GINASQ Posted March 31, 2013 Report Share Posted March 31, 2013 (edited) What do you guys think about this fitment: 17x9 +24 up front with 15-20mm spacers17x10 +20 on the back with 25mm spacers What tire size do you recommend? Will 245/45/17 fit up front? and maybe 265's or 285's in the rear? Edited March 31, 2013 by GINASQ Link to comment Share on other sites More sharing options...
D_Venable Posted April 19, 2013 Report Share Posted April 19, 2013 (edited) Did some wheel trading, the Sparco's are now gone, but I have a pair of Rota P45-R3 18x12 et+20. I got these wheels plus a little cash, so found some 295/30r18's used on craigslist, had them mounted up, running the 33mm spacer I've been running on the 9's, and here are the result after messing with the camber some... Clearance to my MR2 setup, can't fit my pinky in there. so 18x12 et-13 (combined) running a 295/30r18 tire with fender lips folded over, and about -3° of camber -Derek Edited April 19, 2013 by D_Venable 1 Link to comment Share on other sites More sharing options...
Komeuppance Posted April 19, 2013 Report Share Posted April 19, 2013 Looks good. I forsee those tires not saying Kumho much longer, haha. -Robert 1 Link to comment Share on other sites More sharing options...
artinist Posted April 19, 2013 Report Share Posted April 19, 2013 those are the sweetest setup on a starion ever. even better than those simmons on the yellow car from ages ago. Link to comment Share on other sites More sharing options...
StallionProject86 Posted April 19, 2013 Report Share Posted April 19, 2013 so 18x12 et-13 (combined) running a 295/30r18 tire with fender lips folded over, and about -3° of camber -Derek Now that's winning Link to comment Share on other sites More sharing options...
tankbob Posted April 19, 2013 Report Share Posted April 19, 2013 Did some wheel trading, the Sparco's are now gone, but I have a pair of Rota P45-R3 18x12 et+20. I got these wheels plus a little cash, so found some 295/30r18's used on craigslist, had them mounted up, running the 33mm spacer I've been running on the 9's, and here are the result after messing with the camber some... Clearance to my MR2 setup, can't fit my pinky in there. so 18x12 et-13 (combined) running a 295/30r18 tire with fender lips folded over, and about -3° of camber -DerekNever been a fan of "stance" but dammit that looks good so much meat. Link to comment Share on other sites More sharing options...
GINASQ Posted April 20, 2013 Report Share Posted April 20, 2013 What do you guys think about this fitment: 17x9 +24 up front with 15-20mm spacers17x10 +20 on the back with 25mm spacers What tire size do you recommend? Will 245/45/17 fit up front? and maybe 265's or 285's in the rear? Should I make my own thread about this? Link to comment Share on other sites More sharing options...
BOHO Posted April 22, 2013 Report Share Posted April 22, 2013 Derek...Looks nice. One day I'll get to wheels/suspension. Link to comment Share on other sites More sharing options...
Convette Posted April 30, 2013 Report Share Posted April 30, 2013 THIS make me want to see grey spokes black lips.... Link to comment Share on other sites More sharing options...
Recommended Posts