luisitoturbo Posted December 4, 2005 Report Share Posted December 4, 2005 heres the ecu im using look in my signaturealso heres a link this ecu works flawless im using 4 1600cc injector in it idles like a bmw i swearhttp://www.centralfloridaturbo.com/microtech.php ask for rolo for any questions Link to comment Share on other sites More sharing options...
Starcon88 Posted December 4, 2005 Report Share Posted December 4, 2005 Well DIYautotune sells the kit assembled for $410, FIP sells the kit with harness/sensors/and great support for $495. I will most likely go this route. Steven I was going by the unassembled kit for $250 thats what i bought, If you have a slight of hand then you can solder it yourself. If you look at the Megasquirt verson 1 which just controls fuel that kit is only like 130 bucks unassembled and 190 assembled. Link to comment Share on other sites More sharing options...
Funky Phil Posted December 4, 2005 Report Share Posted December 4, 2005 Sounds like an old haltech rip off to me. :wink: Link to comment Share on other sites More sharing options...
bad2theBone Posted December 4, 2005 Report Share Posted December 4, 2005 well for the FIP sells the kit with harness/sensors/and great support for $495, well hold that money in your packet and save some 500 bucks more and get your self the SDS 4F management. and go butter. oh sorry i mean better. the italian accent. http://www.the-reel-mccoy.com/movies/classics/images/godfather1.jpg Link to comment Share on other sites More sharing options...
Truth Posted December 5, 2005 Report Share Posted December 5, 2005 and go butter. oh sorry i mean better. the italian accent. http://www.the-reel-mccoy.com/movies/classics/images/godfather1.jpg http://img.photobucket.com/albums/v365/starquest32/lame.gif ok, now that i got that out of my system... nice progress, Steven. i think you oughta go to the dyno meet in Atlanta in February. you should have her done by then, eh? get some numbers on that beast. Link to comment Share on other sites More sharing options...
ZPI28 Posted December 5, 2005 Author Report Share Posted December 5, 2005 A.J. Im trying real hard to get it completed as soon as I financially can :wink: I still have to buy a T3/T4 and header as well as a EMS. But I should be able to get it close.. Glad I got bumped up another $3 per hr. Steven Link to comment Share on other sites More sharing options...
83TechMaster Posted December 5, 2005 Report Share Posted December 5, 2005 So say it is MS. Its prebuilt, pre tuned, comes with all necessary hardware, good tech support, good price, and has available accessories such as the handheld tuner for great prices. Would it make you happier if they put them in prettier boxes? Now where is mine at! phil Hey Phil I do understand that the FIP products are easy to intstall and start off with a good map to get your car running... But my friend, Megasquirt sold a handheld tuner first :wink: O and they are in pretty boxes, those are megasquirt case's . Thats all i'm sayin The case they use has nothing to do with megasquirt its just a generic aluminum case like you can buy at radio shack(they are using a differnt case now anyway and are on a second smaller revision of the circuit board.) the fip system is a completly differnt board than mega squirt (i have seen them side by side). Link to comment Share on other sites More sharing options...
ZPI28 Posted December 5, 2005 Author Report Share Posted December 5, 2005 Ed sent me an email tonight with all the info I needed.. Nice guy.. Steven Link to comment Share on other sites More sharing options...
substock Posted December 5, 2005 Report Share Posted December 5, 2005 Ed sent me an email tonight with all the info I needed.. Nice guy.. Steven Ed is a real nice guy to deal with. Link to comment Share on other sites More sharing options...
Funky Phil Posted December 5, 2005 Report Share Posted December 5, 2005 Ed sent me an email tonight with all the info I needed.. Nice guy.. Steven And the tech support begins! Might I add, youve also yet to purchase anything! Link to comment Share on other sites More sharing options...
ZPI28 Posted December 5, 2005 Author Report Share Posted December 5, 2005 I know he also told me that his tech support was open from 10am-10pm which would be perfect for friday nights at test n tune. Steven Link to comment Share on other sites More sharing options...
ZPI28 Posted December 13, 2005 Author Report Share Posted December 13, 2005 http://skeeter.cz28.com/images/MPIstuff_009.jpg http://skeeter.cz28.com/images/MPIstuff_012.jpg Just a mock up to see how it will fit in there.Looks like the #4 fuel injector is going to be right against the heater core hose. I mean right against it. Not much room between the intake and master cylinder. But it does fit with the AC still there :D/ So glad about that.. Link to comment Share on other sites More sharing options...
ZPI28 Posted December 21, 2005 Author Report Share Posted December 21, 2005 Looks like the Fed Ex man came through today with my Turbo. Ill have to wrap it and put it under the Tree. Now waiting on my SDS EMS to come in this week. Also got some SS valves coming from DAD, and a 294 Cam from Trilogy Turbos(3weeks). I have began porting my head, once im done ill take it in for new valve guides and to have the seats cut for the bigger valves. http://skeeter.cz28.com/images/mpiturbo.jpg Its coming together a little at a time.. Link to comment Share on other sites More sharing options...
substock Posted December 21, 2005 Report Share Posted December 21, 2005 my hawk was shipped out today :twisted: Link to comment Share on other sites More sharing options...
Boosted_One Posted December 21, 2005 Report Share Posted December 21, 2005 Looking nice ZPI28! It all comes along little by little. 8) Link to comment Share on other sites More sharing options...
Dcrasta Posted December 25, 2005 Report Share Posted December 25, 2005 Megasquirt isnt 'specifically targeted' for our cars. Has anyone here built a Megasquirt ? only one I know was ?david? Easton? He had one on his supercharged quest for a while right? That kit isnt 'easy' to assembly, you can easily fry the CPU chip with too much heat or end up with a bunch of cold solder joints and fried components if you are good at electronics. Anyway, FIP stepped up and made some real products with real results for us, so stop hatin. Those guys are nice, back their products up (unlike some fabricators and venders and u all know who im mentioning..) and actually respond to fone calls and emails. I know personally I have called them many times trying to get my FIP computer and MPI going .. (drat let the cat out the bag!) Link to comment Share on other sites More sharing options...
substock Posted December 25, 2005 Report Share Posted December 25, 2005 ESIr_Type? is running a megasquirt also. he likes it and has been running it for close to a year. i have gone with the hawk ecu, now that i'm doing my mpi convertion. its practically all wired up right now, just a few more things to do before i'm completly done. oh and Steven has gone with the sds system. Link to comment Share on other sites More sharing options...
ZPI28 Posted December 25, 2005 Author Report Share Posted December 25, 2005 Yeah I should have my SDS tomorrow. STeven Link to comment Share on other sites More sharing options...
ZPI28 Posted December 27, 2005 Author Report Share Posted December 27, 2005 Made me a egr block off for my magna,, have one extra, along with one of Burton's and the stock one. http://skeeter.cz28.com/images/MPI20.jpg Been doing some porting on my Clark Head,, almost finished. http://skeeter.cz28.com/images/MPI21.jpghttp://skeeter.cz28.com/images/MPI22.jpg Steven Link to comment Share on other sites More sharing options...
substock Posted December 27, 2005 Report Share Posted December 27, 2005 nice work Steven, i need to get my head ported sometime when i pull it Link to comment Share on other sites More sharing options...
ZPI28 Posted December 29, 2005 Author Report Share Posted December 29, 2005 Got some more goodies in today.. http://skeeter.cz28.com/images/SDSssv.jpg And where do I mount this coil pak? http://skeeter.cz28.com/images/SDScoil.jpg Steven Link to comment Share on other sites More sharing options...
substock Posted December 29, 2005 Report Share Posted December 29, 2005 you could mount it on the firewall, or maybe where the stock ignitor went. Link to comment Share on other sites More sharing options...
ZPI28 Posted December 31, 2005 Author Report Share Posted December 31, 2005 OK I got the DIS mounted. Here it is ,, now I got to get the harness put in. http://skeeter.cz28.com/images/DISmount.jpghttp://skeeter.cz28.com/images/MPIprogress.jpg Steven Link to comment Share on other sites More sharing options...
ZPI28 Posted January 2, 2006 Author Report Share Posted January 2, 2006 Just got some of the lines and stuff bolted back up. Looking better I must say.. http://skeeter.cz28.com/images/enginebay_001.jpg Just finished porting my head, now it goes off this week to have the guides replaced and seats cut. http://skeeter.cz28.com/images/intakeport.jpg Also decided to add a little bling to the Magna fuel rail.. http://skeeter.cz28.com/images/fuelrailmpi.jpg Steven Link to comment Share on other sites More sharing options...
tigertron Posted January 2, 2006 Report Share Posted January 2, 2006 heres the ecu im using look in my signaturealso heres a link this ecu works flawless im using 4 1600cc injector in it idles like a bmw i swearhttp://www.centralfloridaturbo.com/microtech.php ask for rolo for any questions Hey are you the guy with the corrolla they call the ant? Link to comment Share on other sites More sharing options...
Recommended Posts