StreetVelocity Posted May 9, 2012 Report Share Posted May 9, 2012 I would like to see a rear one if you are making those as well Quote Link to comment Share on other sites More sharing options...
Lance_S Posted May 9, 2012 Report Share Posted May 9, 2012 With battery box option? Def interested in front/rear package. Quote Link to comment Share on other sites More sharing options...
quikconq Posted May 9, 2012 Report Share Posted May 9, 2012 Im in Quote Link to comment Share on other sites More sharing options...
zactek Posted May 9, 2012 Report Share Posted May 9, 2012 These are the BEST bars ever. All the ones pictured are the 2nd generation ones.(they look much cooler) I have the 1st generation ones, SUPER-RARE Shawn, If you do these for around $300, a lot of people would be happy. I was when I got them, the best suspension mod for the money! Zack K. Quote Link to comment Share on other sites More sharing options...
ESIrType? Posted May 9, 2012 Author Report Share Posted May 9, 2012 (edited) will these work with cc plates?You have Cusco plates? I don't believe you have to cut or modify anything to run these plates. If that's the case, yes they will fit. Thats my old Eiger silver 86 that go wrecked. And I'm not trying to clutter your thread Shawn. No you're good, I appreciate the feedback! So is this going to be for front and rear or just front? I'm interested. It will be a full set of front tri-bars and a rear set. With battery box option? Def interested in front/rear package. I don't have that option, I am sorry. These are the BEST bars ever. All the ones pictured are the 2nd generation ones.(they look much cooler) I have the 1st generation ones, SUPER-RARE Shawn, If you do these for around $300, a lot of people would be happy. I was when I got them, the best suspension mod for the money! Zack K. Thanks man for the input and complement! I was really pleased with the results of the GEN II sets. They looked better for sure. For me the best parts was a stronger more rigid design. My production time was reduced by about 300% and I didn't need the use of a jig anymore so I have more consistency. I'm in, and also live in the Charlotte area. I know I can get you a decent hookup for the rod ends, maybe I can help with a laser cutter also. Pm me if you would like to discuss it further. BC_99 BC_99 I'll hit you up here today, I really appreciate the offer. Thanks guys,Shawn Edited May 9, 2012 by ESIrType? Quote Link to comment Share on other sites More sharing options...
SOTTY Posted May 9, 2012 Report Share Posted May 9, 2012 The peeps have spoken , i'm in for another set when the time comes . Quote Link to comment Share on other sites More sharing options...
kidjc Posted May 9, 2012 Report Share Posted May 9, 2012 I'm good for @ least (1) set, possibly (2)! Thanx Quote Link to comment Share on other sites More sharing options...
infamos Posted May 9, 2012 Report Share Posted May 9, 2012 I already voted but I thought I would post that I will take a set as well. Quote Link to comment Share on other sites More sharing options...
ESIrType? Posted May 10, 2012 Author Report Share Posted May 10, 2012 Ok, there is more than enough interest. I will start calling around to get laser cut quotes and go from there. I will keep you all posted with my progress. Thanks,Shawn Quote Link to comment Share on other sites More sharing options...
taeisallin Posted May 11, 2012 Report Share Posted May 11, 2012 I'm down for a set, or two Quote Link to comment Share on other sites More sharing options...
HotrodTSi Posted May 11, 2012 Report Share Posted May 11, 2012 I have a set of the originals...very good investment! Quote Link to comment Share on other sites More sharing options...
StreetVelocity Posted May 11, 2012 Report Share Posted May 11, 2012 can someone get a pic of the rear bar for me please Quote Link to comment Share on other sites More sharing options...
BOHO Posted May 11, 2012 Report Share Posted May 11, 2012 (edited) edit: http://i564.photobucket.com/albums/ss85/bohocst/CIMG1015.jpg Edited May 11, 2012 by BOHO Quote Link to comment Share on other sites More sharing options...
Dred_85.5_TSI Posted May 11, 2012 Report Share Posted May 11, 2012 I'd probably be in for a set Quote Link to comment Share on other sites More sharing options...
wolfsquest Posted May 11, 2012 Report Share Posted May 11, 2012 I got 2 questions for ya; how much, and how soon do you need the$$$? Quote Link to comment Share on other sites More sharing options...
Lunacy Posted May 11, 2012 Report Share Posted May 11, 2012 Def keen on front bars, if someone wants my rear one. Not much use for the rear as i have a rollcage that does the same job in the rear haha! Quote Link to comment Share on other sites More sharing options...
RobH Posted May 12, 2012 Report Share Posted May 12, 2012 I'm stoked for the front and rear bars I have tried and tried too find a set of these I'm ready for a set Quote Link to comment Share on other sites More sharing options...
ESIrType? Posted May 12, 2012 Author Report Share Posted May 12, 2012 I got 2 questions for ya; how much, and how soon do you need the$$$? Not sure on the price it depends on how much materials have gone up since my last batch and the cost for laser cutting. BC_99 is helping me out with some local connections here in Charlotte for good pricing. The goal is sub $300, which I think it realistic. I don't think materials have gone up that much. I will keep you posted. As of now I am working on getting quotes, and a few new tools. All the tools I used before were at my dad's shop and I don't live close anymore. Shawn Quote Link to comment Share on other sites More sharing options...
Coke Posted May 14, 2012 Report Share Posted May 14, 2012 Shawn, I am so glad to see you back, and seeking interest in these bars. I contacted you a year or so ago, asking if you had any left, or if you had plans on making a come back and it seems like that time is now! Hurray! I am definitely down for a set. I had a pair of 1st gen bars, but they sold with one of my cars. The 2nd pair I had, were 2nd gen bars, and I lost those in my tree accident. I have been lost without them since. http://i22.photobucket.com/albums/b343/vcyberbob/PF/PF019.jpg You can count on me sending you money when the time is right. Thank you so much!! Justin Quote Link to comment Share on other sites More sharing options...
ESIrType? Posted May 16, 2012 Author Report Share Posted May 16, 2012 Shawn, I am so glad to see you back, and seeking interest in these bars. I contacted you a year or so ago, asking if you had any left, or if you had plans on making a come back and it seems like that time is now! Hurray! I am definitely down for a set. I had a pair of 1st gen bars, but they sold with one of my cars. The 2nd pair I had, were 2nd gen bars, and I lost those in my tree accident. I have been lost without them since. You can count on me sending you money when the time is right. Thank you so much!! Justin Justin thanks for the input, actually you contacting me last year is what got going again. I wasn't at a point then where I could make it happen. Now I am. This is moving forward and I am hoping to have the first batch done in less than a month. Shawn Quote Link to comment Share on other sites More sharing options...
StreetVelocity Posted May 16, 2012 Report Share Posted May 16, 2012 Justin thanks for the input, actually you contacting me last year is what got going again. I wasn't at a point then where I could make it happen. Now I am. This is moving forward and I am hoping to have the first batch done in less than a month. Shawnwhen do you think you will have the final price? Quote Link to comment Share on other sites More sharing options...
ESIrType? Posted May 16, 2012 Author Report Share Posted May 16, 2012 when do you think you will have the final price? I am waiting on quotes for the laser cutting and trying to find a better price on aluminum yet. Hopefully next week I will have a more final price. Shawn Quote Link to comment Share on other sites More sharing options...
StreetVelocity Posted May 17, 2012 Report Share Posted May 17, 2012 Count me in for a set Quote Link to comment Share on other sites More sharing options...
kidjc Posted May 18, 2012 Report Share Posted May 18, 2012 I am waiting on quotes for the laser cutting and trying to find a better price on aluminum yet. Hopefully next week I will have a more final price. Shawn Shawn, just let us know when you have all the info: everything you need from us to make it happen; & thanx! It appears alot are really looking forward to these, self included! Quote Link to comment Share on other sites More sharing options...
slydogg Posted May 18, 2012 Report Share Posted May 18, 2012 rears for me. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.