Dad

Hey Guys and Gals, check out our new website Dads Engine Parts Dad

I have 3 styles of Wheel center caps made from ABS plastic $31.95 a set of 4 You can get them @ www.dadsengineparts.com - In section Miscellaneous

Dads engine parts has plenty of front end parts, nearly all are greasable. www.dadsengineparts.com

There is no bleed screw I just leave cap off until thermostat opens Dad

Hello Gang, revisiting an old Thread, I'm looking for Non turbo oil pump gaskets and somewhere along the way they are changing the part Number to the teardrop MD191432 oil pump gasket- has anyone looked into this? I cannot find NA gaskets- The NA part number I believe to be MD060521 but when you search into it it changes to MD191432 the Turbo gasket Dad

If I remember it is a 5/16 diameter ball ( 8mm ) but I think the lights stay on if the ball is missing. Dad

Great fitting Silicone vacuum lines, fits 4.0 and 4.5mm ports on Conquest and Starion, nice snug fit. $1.25 a foot. http://www.dadsengineparts.com

Nick, Welcome back!!! Dad

Happy new year my friends, To thank all our loyal customers for another great year there will be free shipping on orders over $100.00 of Starquestparts. This goes for the entire site from bearings to cylinder heads. This runs from Jan 1- 2025 to Jan 15th- 2025 so get your list ready!. http://www.dadsengineparts.com Thank you! Dad

902 Old Dixie Hwy # 3, Lake Park, FL, United States, Florida Talk to Heron (561) 882-4000 ,

I have had rear differential gaskets reproduced for the Starquests, I also stock the axle seals and front pinion seals. You can get them at my site http://www.dadsengineparts.com Well I tried uploading a picture 48kb in size and get a message I can only upload file no more than 53.7 kb ?????

Good evening fellow enthusiasts, It was suggest ( i think it was Jimmy) that I should post and reintroduce myself to the group since so many things have changed here. I'm pretty sure there are some that know me but there may be others that don't. I got involved in the Starquest scene by My son ( screen name Kreal) in 2004, he had bought a Quest and had some issues with it and introduced me to the forums so I can help fix it using his account. I would use his account and just sign Dad when I posted anything. I had Started an Engine rebuild/ Machine shop in 1989 Doing work on mainly industrial and Truck engines ( cat, Cummins, Intl etc) There is more $$ in the diesel, although we did work on basically anything going down the road, Just the engines we didn't work on the equipment. So getting back to the forums, I would see at times questions or posts on head rebuilding or block boring- you know basic machine work, so I would chime in and help answer questions, Well you know how young kids on forums can be difficult, well my son misbehaved and got a suspension for I don't know maybe 10 days or something and they said Hey, you can't share accounts. Well Ok, I will make my own and was thinking of a screen name, well everyone knew me at the time as "Dad" so that became my screen name. As I got more into the forums and people found out I had a shop they asked if I could get parts? Sure, that's my business so we started to handle parts for these cars, My son totaled his in 2004 and had to part it to recoup some $$ and found a market for used parts, Dragging wrecked and rusted Quests to my shop. That is how I got my white Quest that I rebuilt and painted in 2007. My other son Bill took an interest and decided he wanted to restore one, He went full bore and I think his story might still be on the boards His name was Coldscrip. Anyway we supplied parts, And I even rebuilt engines for these from Florida to Maine and west to Missouri Our parts business was a good hobby- to be honest I made more selling a caterpillar overhaul kit than a quest kit, But meeting the Quest people was way more fun, As time went on we met more people mainly at Pidgeon forge meets, Our collection of running quests grew to 6 in the family, Sadly in 2020 my building I had leased got put up for sale- forcing me to relocate after 31 years in business, At 62 I said, nope not during this Covid mess, I'm not doing it, I quickly sold off the equipment and closed the doors, I needed room so sold My 87 Shetland and My 83 Starion. I did keep My first Quest the white 87. I took a few months off, added on my garage, took a parts job at a Navistar dealer then at a Chevrolet dealer. We kept in touch with our Quest friends and many kept asking if we would sell parts again ( We, meaning the Wife and I who was a big help in my business), So Her and I decided to start offering parts again and In January of 2023 we opened Dads Engine Parts LLC. I just recently retired but may find something part time to keep me busy. So here is my intro to the folks that may not know who we are. After 31 years in Machine shop business I made a lot of connections with suppliers and reconnected with many of them, Wiseco still make My custom forged pistons that I got licensing from Midwest turbo when they closed. My Oem Mitsubishi connections, although I know get more direct from Japan and of course my aftermarket suppliers. We still have 3 Quests in the family, I pretty much Use what I sell, just recently installed a fuel tank in My son's quest, Sourced out the fuel pump, Fuel feed lines, Filler tube hoses, Fuel drain plug ( took a few tries to find ones that seal well) so after documenting what I used I am able to offer those to the community saving tons of trial and error searching for what you need- That's what I'm about. We have been expanding our line as we go ( we are still trying to make room for parts) Unfortunately I no longer offer any type of machine work. So that in a nutshell is what Dads Engine parts ( Formerly Engine Machine service) is all about, I stick with what works like the same brand of timing kits and cylinder heads I was using 15 years ago as long as they aren't discontinued Been on this forum for 20 years now so if you need parts or some advice especially in the Engine part feel free to contact me. check out my site www.dadsengineparts.com Not sure if the mods need to move this I wasn't sure exactly where to put it so I put it here. Have a great day Dad ( Randy)

Welcome back! They always come back lol. I can't imagine life without a Quest. Dad

You need more than just the shafts, There is a front support housing for the upper shaft, some bolts etc. regardless I'm sure the parts can be found, I myself don't like the shafts, First thing you need to do is check if the rear bearings are in the block and they should be replaced since they can be an issue. not an easy task with engine in the car. The front cover and oil pan will need to be removed. If none of the conn rods were replaced and perhaps balanced, I would just run it, I have seen rod weights vary between engines up to 40 grams, T suspect that may be why some people get heavy vibrations, I don't even really notice any in my car, I prefer the higher oil pressure. Dad

The round ring gets pressed into the front upper balance shaft hole. it blocks off the oil passage down to the main bearing, you can use a bushing installer or flat plate just slam it in there flush, I always added some retaining compound because we had it there Just be sure it goes in straight and tight, You are now done with the upper shaft area, Take the stub shaft and slide it into the oil pump in place of the lower shaft, where the flats are clamp it into a vice ( be sure to leave clearance between back of oil pump and top of vice so the gasket surface doesn't get scratched, clean oil from threads and install the one bolt with some blue thread locker and torque it ( I think 45 lbs, whatever factory is for the bolt to balance shaft) Install your oil pump to block, take chain and both gears together and slide them into place, If I recall teeth on the small gear are to be closer to oil pump- don't pay attention to timing marks sonce there are no balance shafts, you can dummy them up to check alignment of the big and small gear, that's important. Once you figure direction install the woodruff key in oil pump, slide gears and chain together on crank and oil pump- BE SURE KEY DOES NOT FALL OUT! Next put a box end wrench on the other bolt, be sure no oil in oil pump threads, again blue threadlock on threads, deep well 6 point socket and tourque the bolt ( The box end wrench will spin up against your socket so you can torque it - I think a picture of that is on my facebook page. Hope this helps, Dad