Briman2021 Posted November 27, 2012 Report Share Posted November 27, 2012 (edited) Hello all, I am parting out my 1989 conquest. Car has 125,000 miles on it, all of the "New" parts have fewer than 500 miles on them. Did a lot of work on this car in high school, couldn't take it with me to college and haven't had time since "real life" has caught up with me. I am going to list the major parts and prices for those, anything else you want just PM me and make an offer, I would rather help keep another conquest alive than send good parts to the crusher. I will keep a list of parts that I have sold, or don't have as they come up. Also, The suspension/brake stuff will have to wait until later as I have to leave it on to roll the car around in the driveway. My plan is to part out as much as I can, then get the car on a trailer and pull the suspension/brakes/bushings and trailer the rest to the scrapyard. So I will update the thread with info on those parts asap. The fast I sell the rest of this stuff the sooner I can tear off the suspension. Let me know if you are interested, and I will keep you on a "waiting list" and you can have first dibs when I do pull it off. Interior stuff, I would like to sell it as complete as possible, but at the very least I would like to try and sell the smaller parts in pairs, but if it is going slow I will be willing to sell pieces individually. Exterior stuff- Everything has been sprayed with spray paint as a budget job to cover up any bod work. Front fenders have a tiny bit of bondy to fix door dings, otherwise are in pretty good shape, inside has been coated with por-15, Hood has a ton of bondo on it so its probably not worth shipping. Rear quarters have bondo, and had quite a bit of rust, not worth cutting out. Rocker panels are pretty good, little bondo, but not much. Front airdam had 2 small cracks in the corners, repair with 3m bumper epoxy, still holding strong. All of my mounting hardward was rotten so I used screws to attach it to the bumper, there will be 2 small holes up by the fog lights. I like doing package deals, so if you buy multiple parts I'll be willing to drop the price some for you too. Prices Do Not include shipping. Car is located in St Cloud MN Already Sold/Don't have:Both DoorsFront BumperRear BumperRocker PanelsAirdamTransmissionFuel Tank (and accessories)AxlesABS StuffCruise ControlAir Conditioning stuffEmissions Stuff1G MAS + K&NRadio/Shifter Center Console Parts for Sale Full Album is here, I guess I can't post any more pictureshttp://s264.photobuc...parts for sale/ Maf Translator Setup $225 http://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/IMG_1522-1.jpg ARP Head Studs $60 FIC Fuel injectors (oversized secondary) http://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/IMG_1523.jpg Starion TailLights (Pretty much 9.5/10 for condition) Non Jet Valve Head TBD (Gotta check the brand again and check prices, don't want to screw anyone over or get screwed) Stedebani Poly Bushing Set (red) TBD Suspension Techniques Springs and KYB GR-2 Stuts (would prefer to sell as a set, but willing to seperate if I have to) TBD Cross Drilled and Slotted Rotors and Metal Matrix Performance Pads TBD http://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/DSC04672-1.jpghttp://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/DSC04674-1.jpghttp://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/DSC04678.jpghttp://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/DSC04679-1.jpghttp://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/DSC04681.jpg http://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/DSC04687-1.jpghttp://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/DSC04686.jpghttp://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/DSC04688-1.jpg Edited December 13, 2012 by Briman2021 Quote Link to comment Share on other sites More sharing options...
randy Posted November 27, 2012 Report Share Posted November 27, 2012 PM ya Quote Link to comment Share on other sites More sharing options...
Viewska2 Posted November 28, 2012 Report Share Posted November 28, 2012 pm sent Quote Link to comment Share on other sites More sharing options...
87redcat Posted November 28, 2012 Report Share Posted November 28, 2012 PM sent for 1 G MAS Quote Link to comment Share on other sites More sharing options...
Heatmiser Posted November 28, 2012 Report Share Posted November 28, 2012 Pm'd Quote Link to comment Share on other sites More sharing options...
RF600 Posted November 28, 2012 Report Share Posted November 28, 2012 Sending pm for drivers window switch. Quote Link to comment Share on other sites More sharing options...
jdl007 Posted November 28, 2012 Report Share Posted November 28, 2012 I will take the tail lights. Please advise on price and shipping to 33708. Thanks. Quote Link to comment Share on other sites More sharing options...
stacyLynn Posted November 28, 2012 Report Share Posted November 28, 2012 Sent PM Quote Link to comment Share on other sites More sharing options...
Briman2021 Posted November 28, 2012 Author Report Share Posted November 28, 2012 Just to keep everybody up to date, I have responded to most PM's I am going to pull parts after work and get shipping quotes. If I haven't responded back to you yet, it is probably because those parts are already pending sale, I will let you know if the sales fall through or if they sell, so please be patient. Thanks! Quote Link to comment Share on other sites More sharing options...
infamos Posted November 28, 2012 Report Share Posted November 28, 2012 pm'd Quote Link to comment Share on other sites More sharing options...
jisleyjr Posted November 28, 2012 Report Share Posted November 28, 2012 (edited) PM'd you about the header panel, doors, front bumper cover and under-the-door piece. Edit: And head light covers! Edit2: The rear bumper looks in way better shape then mine too! Edited November 28, 2012 by jisleyjr Quote Link to comment Share on other sites More sharing options...
Briman2021 Posted November 30, 2012 Author Report Share Posted November 30, 2012 PM's replied. Aslo, I updated the album. If you have asked me about parts, pictures of parts you inquired about should be in there. Quote Link to comment Share on other sites More sharing options...
87Jassic Posted November 30, 2012 Report Share Posted November 30, 2012 p med. Quote Link to comment Share on other sites More sharing options...
theboyo19 Posted November 30, 2012 Report Share Posted November 30, 2012 Pmed ill drive up. I need a bunch of stuff. Thanks Quote Link to comment Share on other sites More sharing options...
theboyo19 Posted November 30, 2012 Report Share Posted November 30, 2012 Pmed ill drive up. I need a bunch of stuff. Thanks Quote Link to comment Share on other sites More sharing options...
Cloud81918 Posted November 30, 2012 Report Share Posted November 30, 2012 Are you taking pictures with a particle filtration mask on? Looks like it in the last picture. Quote Link to comment Share on other sites More sharing options...
Briman2021 Posted November 30, 2012 Author Report Share Posted November 30, 2012 Are you taking pictures with a particle filtration mask on? Looks like it in the last picture. Lol, my buddy was wondering how long it would take before someone mentioned it. Yes I am, i was doing some painting outside and had my stocking cap on over the mask so it was easier to just leave it on while I took the pictures. Quote Link to comment Share on other sites More sharing options...
Briman2021 Posted December 2, 2012 Author Report Share Posted December 2, 2012 New pics uploaded, check them out Quote Link to comment Share on other sites More sharing options...
87redcat Posted December 3, 2012 Report Share Posted December 3, 2012 PM sent Quote Link to comment Share on other sites More sharing options...
markquest Posted December 3, 2012 Report Share Posted December 3, 2012 Hi, I would like to know if you would sell the oil filter bracket (adapter). and if yes how much? Thank you Quote Link to comment Share on other sites More sharing options...
Briman2021 Posted December 3, 2012 Author Report Share Posted December 3, 2012 Markquest, I will take some pictures to make sure we are talking about the same thing, but if I have it, its for sale. I will PM you tonight with pictures and details. Also, the 1G MAS + K&N filter are sold, as is the radio/shifter console piece. Thanks,Brian Quote Link to comment Share on other sites More sharing options...
markquest Posted December 3, 2012 Report Share Posted December 3, 2012 Thank you Brian. I will be looking for those pics. I may not be on till way later though. Thanks for your time. you may be a real lifesaver as I have been searching everywhere. Mine is cracked. Thanks again. Quote Link to comment Share on other sites More sharing options...
zactek Posted December 12, 2012 Report Share Posted December 12, 2012 Interested in the pass. side headlight assembly, no motor or headlight, LMK Thanks, Zack K. Quote Link to comment Share on other sites More sharing options...
mistapickles Posted December 12, 2012 Report Share Posted December 12, 2012 I want the bushing set, PM me a price. Quote Link to comment Share on other sites More sharing options...
starion revolution Posted December 12, 2012 Report Share Posted December 12, 2012 i need the upper steering column cover how much ship to 89107 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.