Briman2021

What is the deal with the prices on these? I asked around and people were saying they go for $150-$250 all day long, one guy even had a waiting list for his at $260. Fire me an offer guys, not trying to screw people over.

I have a set of black 1989 rear shoulder belts, with speaker shelves as well. Only part missing is one of the "caps" where the seat belt comes through the speaker shelf. Other than that, they are in really good shape, probably a 9/10. $250/OBO shipped in the lower 48 http://i264.photobucket.com/albums/ii183/Briman2021/IMAG0775_zps88dc859b.jpg http://i264.photobucket.com/albums/ii183/Briman2021/IMAG0795_zpseae4e408.jpg http://i264.photobucket.com/albums/ii183/Briman2021/IMAG0777_zps98ffdb8b.jpg

Auto Down Window Switch is sold.

Both of the mitsu covers are sold.

Please delete

SOLD

For sale is an SAFC 2. Unit is in good condition cosmetically, some scratches, screen has some swirl marks but display is clear and it doesn't cause and problems. Unit comes with wiring, but not the direct plug in for the starion, so you will need to splice wires to get it to work, not too hard to do, took me about an hour when I had it on my civic. I'm asking $125 Shipped USPS priority to the lower 48 states. http://i264.photobucket.com/albums/ii183/Briman2021/safc1_zps305b9fdf.jpg http://i264.photobucket.com/albums/ii183/Briman2021/safc3_zps0ef3c62c.jpg http://i264.photobucket.com/albums/ii183/Briman2021/safc2_zps26f0de3b.jpg

Head and Suspension are sold. Still have the brake pads and stock turbo. Make an offer on either, both are boxed and ready to go.

Yep, stock 89 turbo with the three port wastegate, I am also throwing in a barely used coolant line as well just to get it out of my garage.

Pending sale on the complete set, if it falls through I'll be able to split them up. Thanks

Rotors and Injectors are sold.

Someone else PM'ed before you, so... yeah, I am honoring the first come first served...

Knuckle Bolts are sold.

There are approximately 500 miles on everything. As a package deal, I would do 135 plus shipping.

Parts are located in St. Cloud Mn I have a set of "Metal Matrix" brake pads, they probably have about 95% of the material left on them, they worked great for me, weren't noisy or too dusty and stopped on a dime. Sold. I also have stock turbo, minimal shaft play, never blew oil and boosted great for me. Sold.

Update for everyone. Shell went to the scrap yard, I have some parts left over. I am going to update with pics of my parts pile this weekend. Barely any interior stuff left, and most of the exterior panels are spoken for or already gone. Check in this weekend for updates. Thanks, Brian

Markquest, I will take some pictures to make sure we are talking about the same thing, but if I have it, its for sale. I will PM you tonight with pictures and details. Also, the 1G MAS + K&N filter are sold, as is the radio/shifter console piece. Thanks, Brian

New pics uploaded, check them out

Lol, my buddy was wondering how long it would take before someone mentioned it. Yes I am, i was doing some painting outside and had my stocking cap on over the mask so it was easier to just leave it on while I took the pictures.

PM's replied. Aslo, I updated the album. If you have asked me about parts, pictures of parts you inquired about should be in there.

Just to keep everybody up to date, I have responded to most PM's I am going to pull parts after work and get shipping quotes. If I haven't responded back to you yet, it is probably because those parts are already pending sale, I will let you know if the sales fall through or if they sell, so please be patient. Thanks!

Hello all, I am parting out my 1989 conquest. Car has 125,000 miles on it, all of the "New" parts have fewer than 500 miles on them. Did a lot of work on this car in high school, couldn't take it with me to college and haven't had time since "real life" has caught up with me. I am going to list the major parts and prices for those, anything else you want just PM me and make an offer, I would rather help keep another conquest alive than send good parts to the crusher. I will keep a list of parts that I have sold, or don't have as they come up. Also, The suspension/brake stuff will have to wait until later as I have to leave it on to roll the car around in the driveway. My plan is to part out as much as I can, then get the car on a trailer and pull the suspension/brakes/bushings and trailer the rest to the scrapyard. So I will update the thread with info on those parts asap. The fast I sell the rest of this stuff the sooner I can tear off the suspension. Let me know if you are interested, and I will keep you on a "waiting list" and you can have first dibs when I do pull it off. Interior stuff, I would like to sell it as complete as possible, but at the very least I would like to try and sell the smaller parts in pairs, but if it is going slow I will be willing to sell pieces individually. Exterior stuff- Everything has been sprayed with spray paint as a budget job to cover up any bod work. Front fenders have a tiny bit of bondy to fix door dings, otherwise are in pretty good shape, inside has been coated with por-15, Hood has a ton of bondo on it so its probably not worth shipping. Rear quarters have bondo, and had quite a bit of rust, not worth cutting out. Rocker panels are pretty good, little bondo, but not much. Front airdam had 2 small cracks in the corners, repair with 3m bumper epoxy, still holding strong. All of my mounting hardward was rotten so I used screws to attach it to the bumper, there will be 2 small holes up by the fog lights. I like doing package deals, so if you buy multiple parts I'll be willing to drop the price some for you too. Prices Do Not include shipping. Car is located in St Cloud MN Already Sold/Don't have: Both Doors Front Bumper Rear Bumper Rocker Panels Airdam Transmission Fuel Tank (and accessories) Axles ABS Stuff Cruise Control Air Conditioning stuff Emissions Stuff 1G MAS + K&N Radio/Shifter Center Console Parts for Sale Full Album is here, I guess I can't post any more pictures http://s264.photobuc...parts for sale/ Maf Translator Setup $225 http://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/IMG_1522-1.jpg ARP Head Studs $60 FIC Fuel injectors (oversized secondary) http://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/IMG_1523.jpg Starion TailLights (Pretty much 9.5/10 for condition) Non Jet Valve Head TBD (Gotta check the brand again and check prices, don't want to screw anyone over or get screwed) Stedebani Poly Bushing Set (red) TBD Suspension Techniques Springs and KYB GR-2 Stuts (would prefer to sell as a set, but willing to seperate if I have to) TBD Cross Drilled and Slotted Rotors and Metal Matrix Performance Pads TBD http://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/DSC04672-1.jpg http://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/DSC04674-1.jpg http://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/DSC04678.jpg http://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/DSC04679-1.jpg http://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/DSC04681.jpg http://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/DSC04687-1.jpg http://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/DSC04686.jpg http://i264.photobucket.com/albums/ii183/Briman2021/conquest%20parts%20for%20sale/DSC04688-1.jpg

Not really any progress, but I do have 3 donor fenders lined up, so I should be able to cut one up just to see if it will work and then hopefully get it right on the first try with the other 2 fenders. I am cautiously optimistic that it will work, or at least save me a lot of work in making the fender arches. Edit: and Technology is correct, his parts car is the donor car, thanks again dude

No donor car locally available that I know of, and if one popped up chances are it would be at least as rusty as mine. I am somewhat skilled in metal working as I went to school to be shop teacher, however the metals teacher here said he would help me out and let me use the shop, so I have all the welding and machining resources I could need.