After a very eventful day of driving 5+hrs we get to the quest that has been sitting for a few months. Look the car over check fluids drop new batt in and she fired right up. Load her on the trailer and drive 5+hrs back home threw Texas big cities and horrible traffic. Well now gotta get the girlfriend to join the forum and start posting.

fuel filler neck coupler hose   http://www.fillernecksupply.com/

Provided by: Mike C.   the wastegate actuator arm is supposed to have some preload. If you can pull on the arm by hand and connect it to the wastegate flapper by hand then you are either a bodybuilder or more likely don't have anywhere near enough preload. Abut 1/8th to 3/16ths of an inch mismatch between the hole in theactuator arm and the pin it's supposed to fit over is a good starting point.   The way I install the wastegate is to use an air compressor with a quality regulator. With the r

Where does everyone get their bigger alternators from, does it come with a bracket or do you have to make one?