I have my first R154 drive shaft that I had made. It was meant for a 4g63 swap moved 2" forward so it would most likely have to be shortened. It has a spicer slip yoke for 1310 u joints and stock Mitsu in the back. It's a little beat up from the rear u joints braking on me twice. I paid around $400 to have this made. $100 plus shipping and Paypal fee's

pulled the compressor housing off the turbo and found this   http://www.starquestclub.com/forum/uploads/gallery/album_1127/gallery_7736_1127_7867.jpg   previous owner clocked this turbo and instead of grinding off just enough for the alignment pin to clear, looks like a whole chunk was taken out and the o ring is clearly exposed. its been running this way for over a year w/o problem. would I be safe to reuse it or is it junk?

can anybody tell me if there is a website i could go to for aftermarket parts for a starion...or where to find an aftermarket intake i was lookin on here alil bit but not much luck...thanx

So while I'm away at school my Dad decided to have my steering box rebuilt and it looks awesome and apparently feels really solid. It cost about $175 for anyone wondering. When putting everything back together he accidentally broke a connection or something. Here's the email he sent me and the picture.   "While reinstalling the steering box a wire came loose. In the photo, the broken end is circled, It carries B+ (battery + voltage) from the + side of the coil. The broken line indicates where