the owner before be had used the stock intercooler and custom modded it. he cut the stock piping flanges off at each side on the top of the intercooler and re tig welded on new 2.5" pipe flanges to fit the intake hard pipe kit. i wanted to build another one like this and was worried that where the intercooler "pinches" together along the finned sides to the solid sides if their was some sort of gasket there that will be ruined while tig welding on new flanges. anyone have any insight on this or

The car hesitates at 3500 rpm feels like you are hitting the brakes I just changed the fuel pump could the problem be not enough fuel pressure or clogged fuel lines or injectors

hey guys im looking for some parts for my starquest 1. turbo to intercooler hard pipe 2. g54b upgraded camshaft that works with a stock non jet valve head 3. rear camber plates 4. front and rear sway bars 5. front and rear strut tower bars

Hey guys, back with another newbie question. My 87 starion sat since 2008, I went thru it, all the wiring looked fine, dropped the gas tank and cleaned it out. It cranks, but just wont run, and everything else on the gauge cluster is reading except for the fuel level. I had a buddy crank the car and no fuel was coming from the injectors, we also noticed the fuel pump didn't sound like it was priming, so I did the manual check and got nothing. Now before I go and replace the fuel pump is there an