Jump to content

    Replacing factory stereo

    indy_85stariones
    By indy_85stariones,
    keywords: stereo headunit replacing console ------------- Removing stock radio. It is much easier than it looks. Remove center console, working your way from the rear to the front.   Use several old pill bottles to keep screws/bolts seperate by each section. a. Remove rear seat ashtray b. Remove console storage box c. Pry up on power window switch panel d. Remove gear shift knob. e. Disconnect interior lighting wiring   Remove 2 side panels.     Remove Radio and front vertical conso

    ACCELL GEN 7 with pics

    importwarrior
    By importwarrior,
    http://www.mrgasket.com/dfigen7.html   with pictures,   opinions please

    Replacing door speakers

    indy_85stariones
    By indy_85stariones,
    keyword: speaker speakers door replacing -------- Replacing Door Speakers...   Buy a trim stick. I bought mine at NAPA -- around $8. Use several vitamin plastic bottles to hold screws. One for each step, so you can replace each screw back to its original location. Disconnect negative terminal of battery, if you have plans to work on wiring.   1) Lower Window. 2) Remove Door Light (optional). 3) Remove the Emergency Relase Buckle of Shoulder Belt (86 and older). 4) Remove Inside Door

    Replacing dash speakers...

    indy_85stariones
    By indy_85stariones,
    keyword: speaker speakers dash replacing ------ Remove Dash Speakers... Passenger Side: 1) Remove contents from glove box. Open glove box door fully, by depressing the sides of the glove box. The door stops will clear the sides of the door opening. 2) Remove screw connecting air heating vent to dash. 3) Remove air heating duct. 4) The speaker is now exposed. 5) Remove two nuts that hold the speaker. I used a 1/4" rachet, extension, and 5/16" deep well socket. Also, the socket

Portal by DevFuse · Based on IP.Board Portal by IPS
×
×
  • Create New...