I just wanted to post some pics of my cage before I sell it. Just a reference to those that are thinking of having a custom cage built or are thinking of building one themselves.   http://pic18.picturetrail.com/VOL876/3266090/8964045/123621701.jpg http://pic18.picturetrail.com/VOL876/3266090/8964045/123621681.jpg http://pic18.picturetrail.com/VOL876/3266090/8964045/123621636.jpg http://pic18.picturetrail.com/VOL876/3266090/8964045/123621622.jpg http://pic18.picturetrail.com/VOL876/3266090/896

We are working on a Full Race Custom Stainless Steel Manifold that will be available for next years racing season. Currently all we have is the collector built for it: Pics below   http://www.xclusivecustomimports.com/image...led_384x288.jpg   http://www.xclusivecustomimports.com/image...led_384x288.jpg   As you can see the manifold runners and collectors will be constructed of grade 40 316 stainless steel. The flanges wil be made out of 3/8 - 1/2 " laser cut 304 stainless. This will make a very

Some measurements I took from a Magna Head. Hopefully somebody will get some benefit from them.   All sizes are in mm (divide by 25.4 to get inches)   Inlet dia - 42.1 Exhaust dia - 39.5 Distributor hole - 27.0   Inlet valve seat dia (inside insert) - 39.7 Inlet valve seat dia (outside insert) - 47.2   Exhaust valve seat dia (inside insert) - 32.6 Exhaust valve seat dia (outside insert) - 40.0   Valve stem hole dia (inlet and exhaust) - 12.9   Combustion chamber dia - 90.5 Overall head height (h

I've seen these on ebay a few times and thought it'd be fun to take a look at. I finally spotted one at the local salvage yard while I was scouting out a 1G MAS and figured it'd be worth keeping as a "just in case" part.   The manifold is off a 2000 (or so) Toyota Camry. As you can tell in the last picture it's for a DOHC head, but the tubes are round up until they reach the flange.   http://members.cox.net/maxzilla2/intake1.jpg   http://members.cox.net/maxzilla2/intake2.jpg   http://members.co