brianpaul98 Posted February 17, 2014 Author Report Share Posted February 17, 2014 Thanks KT this list should be a big help to people trying to choose the proper injector sizes. Quote Link to comment Share on other sites More sharing options...
averse Posted February 27, 2014 Report Share Posted February 27, 2014 anyone else on this mini-group buy? My secondary is sputtering and I'm needing a replacement soon Quote Link to comment Share on other sites More sharing options...
Tubbs Posted February 27, 2014 Report Share Posted February 27, 2014 OK guys. Highly interested. Hardware n gaskets included? What do you guys recommend for a 40 over, 16g, 10 lbs low n 15 lbs high boost. Have these trilogy's that I am not convinced with n seals crap out in less than a year. Injector clip u recommend for them. Thanks for any help n infoDavid Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted February 27, 2014 Author Report Share Posted February 27, 2014 One good part about clearing out everything from the shop and house is that you find things. I found the papers on a set of like new stock OEM injectors. I never saw a set in that good shape so I sent them out to get cleaned and flow tested. The primary flowed 636cc @ 43.5 psi which is approx 580cc at 36 psi. and the secondary flowed approx 1044cc at 43.5 psi which is approx 950cc at 36 psi. I can't remember the exact base fuel pressure at idle and it really doesn't matter because it is what it is and there aren't that many sizes to choose from. If you are running an aftermarket regulator and are playing with fuel pressures and want to know the fuel pressure at various PSI you can calculate it here : http://www.rceng.com/technical.aspx Go about half way down the page and there is a table where you can plug in numbers and it calculates the cc's for you. Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted February 28, 2014 Author Report Share Posted February 28, 2014 Updated list but #4 is not a definite. 1. Kidman - ( Lucas ) 750 cc, 850cc, 1000cc and 1225 cc 2. averse - ( Lucas ) 750 cc and 1225 cc 3. KT - (Lucas) 1000cc and (Bosch) 1680cc 4. dsm9478 - 750cc / 1000cc Lucas (Pending Cash Flow) 5. Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted March 24, 2014 Author Report Share Posted March 24, 2014 I just want to let everyone know that I have the final move out date set for the 15th of April. Anyone who wants injectors needs to get up with me asap because if you wait until the week of the 15th I'm not going to be able to put in any orders and get them here in time. Once I head out I can't say if I will start selling any of my parts again. Quote Link to comment Share on other sites More sharing options...
schaffman Posted March 24, 2014 Report Share Posted March 24, 2014 I am interested in a set but don't know what sizes to get. I am running a stock set up currently with bigger turbo and bigger fuel pump. I am open to any suggestions that you may have. Thanks, Ari Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted March 25, 2014 Author Report Share Posted March 25, 2014 I am interested in a set but don't know what sizes to get. I am running a stock set up currently with bigger turbo and bigger fuel pump. I am open to any suggestions that you may have. Thanks, Ari Hello Ari, The 750cc / 1000cc injectors have been working great with mildly modified setups like yours. Unless you had a was to manage the fuel I wouldn't suggest going any bigger. Quote Link to comment Share on other sites More sharing options...
'87quest Posted March 30, 2014 Report Share Posted March 30, 2014 Can I get in on a set of the stock replacements? (750cc/1000cc) Thanks, Drake Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted March 30, 2014 Author Report Share Posted March 30, 2014 Can I get in on a set of the stock replacements? (750cc/1000cc) Thanks, Drake Yes you can. I'm going to be putting in the order shortly because it getting down to my last few weeks here and I don't want to cut it that close. Whoever wants the injectors I'm going to need the money asap so I can get them ordered. Like I said I will need at least 5 people to send payment before this can happen. Quote Link to comment Share on other sites More sharing options...
'87quest Posted March 31, 2014 Report Share Posted March 31, 2014 So if I would buy a set I would't get them right away? Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted March 31, 2014 Author Report Share Posted March 31, 2014 So if I would buy a set I would't get them right away? No that is not correct. This has taken so long that Averse (#2 on the list) already got a set and dsm9478 ( #4 ) hasn't got back with me so I honestly don't think this last buy is going to happen. I explained in the beginning that I would need at least 5 people for it to be worth doing and the last few times I tried to get everyone together I either can't get the payments or people back out. I'm estimating I have 3 more weeks before the move and realistically I would need to order these injectors by the end of this coming week to be able to get them in time, do all the machining and ship them out. I just don't think there will be enough time. Here is what we have so far : 1. Kidman - ( Lucas ) 750 cc, 850cc, 1000cc and 1225 cc 2. 87quest - ( Lucas ) 750 cc and 1000cc 3. KT - (Lucas) 1000cc and (Bosch) 1680cc 4. dsm9478 - 750cc / 1000cc Lucas (Pending Cash Flow) 5. Quote Link to comment Share on other sites More sharing options...
'87quest Posted March 31, 2014 Report Share Posted March 31, 2014 Well I can send money anytime just let me know that it's going to work out and I'll have it to you right away Quote Link to comment Share on other sites More sharing options...
'87quest Posted March 31, 2014 Report Share Posted March 31, 2014 Well I can send money anytime just let me know that it's going to work out and I'll have it to you right away Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted April 2, 2014 Author Report Share Posted April 2, 2014 I will definitely let you know. Quote Link to comment Share on other sites More sharing options...
'87quest Posted April 2, 2014 Report Share Posted April 2, 2014 Ok thanks I'd really like to get a set. Quote Link to comment Share on other sites More sharing options...
markhansenconquest Posted April 3, 2014 Report Share Posted April 3, 2014 need 850 injectors 2 please and 10 throttle shaft seals and gas O-rings... sent PM last night..will send again today ...markhansenconquest@yahoo.com will send money asap.... thank you brian Quote Link to comment Share on other sites More sharing options...
'87quest Posted April 3, 2014 Report Share Posted April 3, 2014 Brian I found a used set thanks anyways Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted April 3, 2014 Author Report Share Posted April 3, 2014 Like I said, I don't think this is going to happen. Quote Link to comment Share on other sites More sharing options...
'87quest Posted April 3, 2014 Report Share Posted April 3, 2014 Like I said, I don't think this is going to happen.Thats why I went with a used set Quote Link to comment Share on other sites More sharing options...
ucw458 Posted April 5, 2014 Report Share Posted April 5, 2014 How much are the bosch 1400s without machining? Will they fit a MPI setup? Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted April 5, 2014 Author Report Share Posted April 5, 2014 Hello everyone, right now I'm looking at about 2 weeks before I'll be moving out. I'm very worried that I won't have the time to order the injectors, get them in and do the machining before I leave. It might be better if I hold off on this until I get up north and get settled in. I just don't want to take peoples money and leave them hanging while I'm moving. I've seen this sort of thing happen before on here before and it's turns ugly fast. I'd rather just wait nd help everyone out at a later date if I can. I'm really sorry about this, I have never turned anyone away before and I hate to do it now but I don't feel right about taking peoples money when I can't predict how it will turn out. I'll keep in touch and let everyone know when I'm situated and if I'll be able to start this back up at a later date. Again I'm truely sorry and I hope everyone understands. Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted May 25, 2014 Author Report Share Posted May 25, 2014 I finally reached my destination here in Jersey and right now I'm going through the job search. I'm going to try the injector buy again while I still have the free time to do it. Anyone interested let me know and hopefully we can get it done this time. Quote Link to comment Share on other sites More sharing options...
KT Posted May 27, 2014 Report Share Posted May 27, 2014 I'm still in for the 1000/1680 combo. Thanks! KT Quote Link to comment Share on other sites More sharing options...
hopefull noob Posted May 27, 2014 Report Share Posted May 27, 2014 I'll be ordering, just need to decide on the size. Either stock or one step bigger.Hn Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.