Glen - 4G Performance Posted June 22, 2009 Report Share Posted June 22, 2009 I have 10 Intake manifolds left, All have the same TB flange of Aprox 3"x2.6" - (75mmx65mm) bolt spacing and aprox 3" - 75mm TB opening (US Ford) These are leftover from the last GP. Getting married in 3 weeks time :hangman: and shes more expensive that i thought so getting rid of everything i have left laying around http://shop.ebay.com.au/merchant/rallyant I only have 6 on fleabay, but theres another 4 available if wanted. IF theres a chance of a GP for 10 intakes ill pull them off ebay, and sell them for $395 AUS$ (Aprox $300USD) each... let me know If you have any more questions or want any more pics of individual intakes, shoot me an email http://www.ris.net.au/pix/intake1.jpg cheers Glen glenkimpton@gmail.com Quote Link to comment Share on other sites More sharing options...
blerg Posted July 2, 2009 Report Share Posted July 2, 2009 These still available? congrats btw! :sweatingitout: Quote Link to comment Share on other sites More sharing options...
sittin-sideways Posted August 13, 2009 Report Share Posted August 13, 2009 are those manfold already modded? Quote Link to comment Share on other sites More sharing options...
89PalermoSHP Posted August 13, 2009 Report Share Posted August 13, 2009 4G Mitsubishi Modded Magna MPI Intake manifolds (title) Quote Link to comment Share on other sites More sharing options...
sittin-sideways Posted August 14, 2009 Report Share Posted August 14, 2009 awsome i may jump on this Quote Link to comment Share on other sites More sharing options...
Remlor Posted September 3, 2009 Report Share Posted September 3, 2009 how will you take payment and is shipping included Quote Link to comment Share on other sites More sharing options...
Technology Posted September 3, 2009 Report Share Posted September 3, 2009 How do you get your wood floors to shine so well? Quote Link to comment Share on other sites More sharing options...
Glen - 4G Performance Posted October 16, 2009 Author Report Share Posted October 16, 2009 How do you get your wood floors to shine so well? hahaha, Thats the only room in the house that does shine like that,I spent ages sanding that floor back to a perfect surface before sealing it, I sanded between coats also, went WAY overboard for a floor! the rest of the house is getting a std job. Quote Link to comment Share on other sites More sharing options...
A.Wilder Posted October 16, 2009 Report Share Posted October 16, 2009 what is shipping on these? Quote Link to comment Share on other sites More sharing options...
psu_Crash Posted October 16, 2009 Report Share Posted October 16, 2009 FYI these still need some modification to work with the SQ head. The rear coolant passage is much larger and will leak if not installed on a MAGNA head. Quote Link to comment Share on other sites More sharing options...
Psykore Posted October 16, 2009 Report Share Posted October 16, 2009 He sells them with an adapter plate so it will work with a stock SQ head. Quote Link to comment Share on other sites More sharing options...
psu_Crash Posted October 17, 2009 Report Share Posted October 17, 2009 He sells them with an adapter plate so it will work with a stock SQ head.Ahh ... you mean the plate that is IN the picture. lolIgnore me ... Quote Link to comment Share on other sites More sharing options...
jszucs Posted October 21, 2009 Report Share Posted October 21, 2009 How do you get your wood floors to shine so well? Do you really want to konw? Ok what you do is start with good hardwood floor, usualy these are 50 - 100 years old or there new and you paid buco bucks for them and they still shine. Anyways you take off all the trim work around the floor. You rent a barrel sander and do the whole place. After you have done that you get down on your hands and knees with sand paper and steel wool and take off any other inperfections by hand. Then you lay down a product called Water Locks or Water locs. You don't want to be living there for about a week, and no source of flame can be allowed or the place will blow. (I recomend laying the first coat with a mohair roller and go slow so you don't bubble it. Next you let this dry and you get down again on the floor and do the whole first coat with steel wool. Then you lay your finish coat ontop. Even my 147# dog has not been able to scratch this coating and it's what they use to use on gym floors. Quote Link to comment Share on other sites More sharing options...
Big John Posted November 2, 2009 Report Share Posted November 2, 2009 do you have any of these left if so will they fit on a sq head and what is the shipping to tennessee thanks john Quote Link to comment Share on other sites More sharing options...
jtsi2001 Posted February 12, 2010 Report Share Posted February 12, 2010 do you have any of these left if so will they fit on a sq head and what is the shipping to tennessee thanks john I had purchased one of these complete setups from Glen over the summer but unfortunately never got a chance to do anything with it as i had to sell the car. I still have this setup as it was sent to me in box that im willing to sell. Quote Link to comment Share on other sites More sharing options...
dntbther Posted February 13, 2010 Report Share Posted February 13, 2010 im in for either glenn's or jtsi's how much shiped to NC 27540? what other stuff do u have glenn pm me. thanks Quote Link to comment Share on other sites More sharing options...
dntbther Posted February 16, 2010 Report Share Posted February 16, 2010 is anybody out there lol Quote Link to comment Share on other sites More sharing options...
sincere Posted March 5, 2010 Report Share Posted March 5, 2010 I have 10 Intake manifolds left, All have the same TB flange of Aprox 3"x2.6" - (75mmx65mm) bolt spacing and aprox 3" - 75mm TB opening (US Ford) These are leftover from the last GP.Getting married in 3 weeks time <img src="http://www.starquestclub.com/forum/public/style_emoticons/<#EMO_DIR#>/hangman.gif" style="vertical-align:middle" emoid=":hangman:" border="0" alt="hangman.gif" /> and shes more expensive that i thought <img src="style_emoticons/<#EMO_DIR#>/smile.gif" style="vertical-align:middle" emoid="" border="0" alt="smile.gif" /> so getting rid of everything i have left laying around<a href="http://shop.ebay.com.au/merchant/rallyant" target="_blank">http://shop.ebay.com.au/merchant/rallyant</a>I only have 6 on fleabay, but theres another 4 available if wanted. IF theres a chance of a GP for 10 intakes ill pull them off ebay, and sell them for $395 AUS$ (Aprox $300USD) each... let me know If you have any more questions or want any more pics of individual intakes, shoot me an email <img src="http://www.ris.net.au/pix/intake1.jpg" border="0" class="linked-image" /> cheersGlenglenkimpton@gmail.com Quote Link to comment Share on other sites More sharing options...
randyshaw81 Posted April 19, 2010 Report Share Posted April 19, 2010 i am in the army and i am far away from home. I would so appreciate if you saved one of these for me. I will not be back home for about 3 more months maybe a tad more. I been looking for an MPI manifold and didnt think to look here. I check this site no matter what, NO MATTER WHAT! You guys are awesome. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.