Oscar_the_Grouch Posted September 17, 2013 Report Share Posted September 17, 2013 (edited) Hello I have found some of my SS Braided lines that I introduced to the community over a decade ago. These are NOS lines that have been orphaned and found in my recent move so I'll post new inventory as I find them. As of this post these are the lines available:ALL lines use Steel Aeroqip/Eaton Aerospace Fittings and Adapters for strength, reliability and durability (NOT ALUMINUM, unless otherwise specified)ALL lines are TEFLON Steel Braid (NOT RUBBER, unless otherwise specified) ---------------------------------------------------------------x2 Fuel RETURN Lines ----------------------------- $15.00ea shipped-------- OEM RETRUN Lo-Pressure ( FPR to Hardline return to tank ) ( Rubber hose w/imitation hose ends ) ---------------------------------------------------------------TEFLON (NOT rubber) Steel Braid, STEEL (NOT Aluminum) hose ends and ADAPTERSx1 Two(2) Piece FULL length Clutch Replacement Line --------------------- $65.00 SHIPPED (Replaces the OEM Hardline from master and the shorty rubber line to the slave with matching pieces in SS line) TEFLON (NOT rubber) Steel Braid, STEEL (NOT Aluminum) hose ends and ADAPTERSx1 One(1) Piece FULL Length OEM Replacement Clutch Line ------------- $40.00 SHIPPED (Replaces the OEM Hardline from master and the shorty rubber line to the slave with one piece SS line) TEFLON (NOT rubber) Steel Braid, STEEL (NOT Aluminum) hose ends and ADAPTERS1x "SHORTY" Clutch Replacement Line ----------------------------------------- $25.00 SHIPPED (Shorty, From slave to hardline. Replaces ONLY the OEM rubber Shorty) SHORTY SHOWN BELLOWhttp://i161.photobucket.com/albums/t229/Oscar-the-Grouch/Clutch.jpg --------------------------------------------------------x1 Brake Master Cylinder line SET ( Two(2) hoses ) --------- $40.00 SHIPPED ( These are RUBBER Steel Braided lines NOT Teflon ) ( These use Imitation hose ends that use standard worm clamps inside a cover ) ( Replaces BOTH rubber hoses to and from the brake master and the fluid reservoir ) http://i161.photobucket.com/albums/t229/Oscar-the-Grouch/20130919_132531-1_zps783a7b97.jpg -----------------------------------------------------------2x Turbo Oil Feed Lines ------------------------- $50.00ea SHIPPEDTEFLON (NOT rubber) Steel Braid, STEEL (NOT Aluminum) hose ends and ADAPTERShttp://i161.photobucket.com/albums/t229/Oscar-the-Grouch/TurboOilFeed.jpg -----------------------------------------------------------TEFLON (NOT rubber) Steel Braid, STEEL (NOT Aluminum) hose ends and ADAPTERS1x Turbo water FEED line ------------------------------------------- $65.00 SHIPPED ( From water pump to Turbo ) ( Teflon NOT RUBBER ) ( Uses imitation hose end at T-Stat, Looks like AN fitting but its a worm type clamp ) TEFLON (NOT rubber) Steel Braid, STEEL (NOT Aluminum) hose ends and ADAPTERS1x Turbo water FEED line ( MUST TAP WATER PUMP ) ------ $85.00 SHIPPED ( From water pump to Turbo ) ( Teflon NOT RUBBER ) http://i161.photobucket.com/albums/t229/Oscar-the-Grouch/20140511_135031-1_zpsbe76b8dc.jpg TEFLON (NOT rubber) Steel Braid, STEEL (NOT Aluminum) hose ends and ADAPTERS1x Turbo water RETURN line ---------------------------------------------- $65.00ea SHIPPED ( From turbo to T-Stat housing ) ( Teflon NOT RUBBER ) ( Uses imitation hose end at T-Stat, Looks like AN fitting but its a worm type clamp ) TEFLON (NOT rubber) Steel Braid, STEEL (NOT Aluminum) hose ends and ADAPTERS1x Turbo water RETURN line ( MUST TAP T-STAT HOUSING ) ----- $85.00ea SHIPPED ( From turbo to T-Stat housing ) ( Teflon NOT RUBBER ) http://i161.photobucket.com/albums/t229/Oscar-the-Grouch/20140511_135518-1_zpsa7661d05.jpg -----------------------------------------------------------TEFLON (NOT rubber) Steel Braid, STEEL (NOT Aluminum) hose ends and ADAPTERSx1 Hi-Pressure Power Steering line VERSION 1(Pictured) -------------- $100.00 Short version, tight fit, hugs the block, less volume needed. Adapters ARE INCLUDED TEFLON (NOT rubber) Steel Braid, STEEL (NOT Aluminum) hose ends and ADAPTERSx1 Hi-Pressure Power Steering line VERSION 2 --------------------------- $140.00 (12" longer than V1 made to run same route as OEM, 45deg fittings instead of 90deg on V1 for better fit) Adapters ARE INCLUDED Two(2) "Heat Loom" availableNO heat shield SORRYhttp://i161.photobucket.com/albums/t229/Oscar-the-Grouch/PowerSteering.jpg -----------------------------------------------------------x2 Lo-Pressure RETURN Power Steering Lines (U-Assemble)------------ $120.00 Same in "LOOK" to the Turbo Water lines bellow but A LOT LONGER of course.Rubber steel braid line, Aluminum fitting w/steel addapter at the Steering box andimitation hose end at the other end. U-Assemble NOTE:All you need is a VISE to hold the bottom part of the fitting while you thread the other part of the fitting into the hose. I can provide detailed instructions if you'd like. I no longer have space/tools/means to assemble these myself. I can have them assembled by a hydro shop but price will reflect that extra labor. http://i161.photobucket.com/albums/t229/Oscar-the-Grouch/TurboCoolant.jpg ------------------------------------------------------------TEFLON (NOT rubber) Steel Braid, STEEL (NOT Aluminum) hose ends and ADAPTERSABS Bypass lines please inquire as I DO NOT have any available but can get a GP on these if there's enough interest.NOTE: It will NOT be a Goodridge brand but it WILL BE a DOT approved line.Will get new pricing and try to keep it the same as the original lines at $45.00ea So far we have ....- BOOSTED88tsi- KIDMEN http://i161.photobucket.com/albums/t229/Oscar-the-Grouch/ABS.jpg LIST Will update as items sell or as I find more.ThanksOTG Edited May 12, 2014 by Oscar_the_Grouch Quote Link to comment Share on other sites More sharing options...
BuGG Posted September 17, 2013 Report Share Posted September 17, 2013 Does the PS line need adapters to work? I dont see any in picture. Quote Link to comment Share on other sites More sharing options...
'87quest Posted September 17, 2013 Report Share Posted September 17, 2013 sending pm Quote Link to comment Share on other sites More sharing options...
BOOSTED88tsi Posted September 17, 2013 Report Share Posted September 17, 2013 if you have a abs delete ill take it Quote Link to comment Share on other sites More sharing options...
questsale Posted September 17, 2013 Report Share Posted September 17, 2013 Hi, put me down for the $25 clutch line and the turbo oil return line please Quote Link to comment Share on other sites More sharing options...
KIDMEN Posted September 18, 2013 Report Share Posted September 18, 2013 abs line too Quote Link to comment Share on other sites More sharing options...
Oscar_the_Grouch Posted September 18, 2013 Author Report Share Posted September 18, 2013 Does the PS line need adapters to work? I dont see any in picture. Yes adapters are included for all lines sold unless otherwise mentioned. Quote Link to comment Share on other sites More sharing options...
TexasQuest Posted September 18, 2013 Report Share Posted September 18, 2013 Interested in the power steering line. This is the line from the power steering pump to the gearbox correct? Doesn't seem long enough compared to oem. Quote Link to comment Share on other sites More sharing options...
randy Posted September 18, 2013 Report Share Posted September 18, 2013 PM'd you Quote Link to comment Share on other sites More sharing options...
skillz Posted September 18, 2013 Report Share Posted September 18, 2013 Put me down for a $25 clutch line Quote Link to comment Share on other sites More sharing options...
Oscar_the_Grouch Posted September 18, 2013 Author Report Share Posted September 18, 2013 (edited) . Edited September 19, 2013 by Oscar_the_Grouch Quote Link to comment Share on other sites More sharing options...
xx_somguy_xx Posted September 19, 2013 Report Share Posted September 19, 2013 Do you still have one of the short clutch lines? If so I will take it. Quote Link to comment Share on other sites More sharing options...
Oscar_the_Grouch Posted September 19, 2013 Author Report Share Posted September 19, 2013 Do you still have one of the short clutch lines? If so I will take it. PMedUpdated quantities Quote Link to comment Share on other sites More sharing options...
BuGG Posted September 19, 2013 Report Share Posted September 19, 2013 Pmed Quote Link to comment Share on other sites More sharing options...
Lloyd Posted September 24, 2013 Report Share Posted September 24, 2013 Ill take abs line and full length clutch line Quote Link to comment Share on other sites More sharing options...
questsale Posted May 4, 2014 Report Share Posted May 4, 2014 Hey, anyone have issues here? The clutch line I have, the threads dont match up. Quote Link to comment Share on other sites More sharing options...
Oscar_the_Grouch Posted May 5, 2014 Author Report Share Posted May 5, 2014 Hey, anyone have issues here? The clutch line I have, the threads dont match up. Okay... Which thread dies not match where?The fat end of the adapter will go to the hard line and the skinny end to the hose. Then the banjo bolt is self explanatory. Let me know where it is you're having trouble. Quote Link to comment Share on other sites More sharing options...
questsale Posted May 5, 2014 Report Share Posted May 5, 2014 I believe the entire thing is standard. My metric thread gauge does not match up to the threads on your line, and neither of the hex nuts on the lines match up to any metric wrench, its either too small, or too big. I have no standard tools or gauges to confirm. Quote Link to comment Share on other sites More sharing options...
87redcat Posted May 5, 2014 Report Share Posted May 5, 2014 showing you have one shorty clutch line left. If so I'll take it. Let me know.Thanks Quote Link to comment Share on other sites More sharing options...
Squrlsquash Posted May 5, 2014 Report Share Posted May 5, 2014 Im in for the ABS delete GP Plus will buy a clutch line- if either are still in stock -Aaron Quote Link to comment Share on other sites More sharing options...
8687tsiwidebody Posted May 6, 2014 Report Share Posted May 6, 2014 Ill take a clutch line from master to slave for 40 shipped!!! Quote Link to comment Share on other sites More sharing options...
questsale Posted May 6, 2014 Report Share Posted May 6, 2014 Update on the issue with it not fitting? Quote Link to comment Share on other sites More sharing options...
KIDMEN Posted May 10, 2014 Report Share Posted May 10, 2014 I will take the brake master cylinder line set if they are still availiable please let me know Quote Link to comment Share on other sites More sharing options...
randy Posted May 10, 2014 Report Share Posted May 10, 2014 PM'd ya Oscar. Quote Link to comment Share on other sites More sharing options...
Oscar_the_Grouch Posted May 11, 2014 Author Report Share Posted May 11, 2014 Update on the issue with it not fitting? you should have received this RIGHT ?banjo goes to slave, big end is the adapter that connects oem line to new line and clamps on at oem location http://i161.photobucket.com/albums/t229/Oscar-the-Grouch/Clutch.jpg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.