Jump to content

Crankcase pressure


Recommended Posts

So i have a pretty fresh engine and recently started boosting on it and under full boost it blows the dipstick out and oil goes everywhere, the turbo seals aernt bad and i wouldnt think its blow by but i guess i just dont know what else it could be ? any help would be appreciated.

 

 

thanks adam

Link to comment
Share on other sites

Check pcv is closing under boost (cheapos like to leak past the valve)

 

Also ensure your seperator is clean and hooked up correctly.

 

If those are all good your dipstick seal is just prolly hard and not sealing at all.

Link to comment
Share on other sites

You can tie-wire the dipstick down or put a bend in it so that it pushes against the inside of the tube to help hold it down, as well.

 

Old spark plug boot works well also. :)

Link to comment
Share on other sites

 Share

×
×
  • Create New...