leesfer Posted January 24, 2013 Author Report Share Posted January 24, 2013 Paint is probably going to be awhile, want to make sure I have everything squared away and that i don't blow my motor and end up doing a motor swap Quote Link to comment Share on other sites More sharing options...
leesfer Posted August 10, 2013 Author Report Share Posted August 10, 2013 It's been too long since I've done anything or updated this thread... I'm back! Got bored and am waiting on parts on my motorcycle build so I decided to jump to the Starion to get something done. I cleaned out the interior. Removed the A/C unit from under the dash. Put the MS harness through the firewall. Installed the Corbeau seat, finally. http://i.imgur.com/7xVEZDu.jpg Quote Link to comment Share on other sites More sharing options...
leesfer Posted February 3, 2014 Author Report Share Posted February 3, 2014 (edited) Finally "finished" my motorcycle build after a whole year (is that how long it's been?), still have some tweaks to do but it's pretty much there. Now I can start on the Starion again. After so much time has passed, I kind of want to pull my motor, rip everything out, start completely fresh on electrical, and paint the engine bay. It'll give me peace of mind knowing all the electrical is mine Not sure what to do about the distributor though... http://i.imgur.com/LB0TXAg.jpg Edited February 3, 2014 by leesfer Quote Link to comment Share on other sites More sharing options...
mbruneaux Posted February 3, 2014 Report Share Posted February 3, 2014 Nice work. Quote Link to comment Share on other sites More sharing options...
R-R-Quest Posted February 3, 2014 Report Share Posted February 3, 2014 Welcome back. Nice looking bike. For those of us who don't know much about bikes, what is it? (Besides the obvious - Honda) Quote Link to comment Share on other sites More sharing options...
mbruneaux Posted February 3, 2014 Report Share Posted February 3, 2014 Custom Cafe Racer? Quote Link to comment Share on other sites More sharing options...
leesfer Posted February 3, 2014 Author Report Share Posted February 3, 2014 (edited) It's a 1972 Honda CB750 It started out looking something like this: (but imagine it in terrible condition haha) http://www.cb750.com/images/main/Honda_CB750.jpg Edited February 3, 2014 by leesfer Quote Link to comment Share on other sites More sharing options...
leesfer Posted February 16, 2014 Author Report Share Posted February 16, 2014 Started tearing out everything! Quote Link to comment Share on other sites More sharing options...
Dred_85.5_TSI Posted February 17, 2014 Report Share Posted February 17, 2014 Love those bikes! I have my eye on a CB550 Super Sport that my friends dad has sitting in his garage. Also have fun with the wiring! Quote Link to comment Share on other sites More sharing options...
leesfer Posted February 27, 2014 Author Report Share Posted February 27, 2014 Well I've started and almost finished with my new relay/fuse setup http://imgur.com/1WEZrNE.jpg http://imgur.com/SWhw90g.jpg Quote Link to comment Share on other sites More sharing options...
R-R-Quest Posted February 27, 2014 Report Share Posted February 27, 2014 Nice and clean. I like it! What brand fuse and relay blocks are those? Or did I miss it somewhere in the thread? 1 Quote Link to comment Share on other sites More sharing options...
leesfer Posted February 27, 2014 Author Report Share Posted February 27, 2014 (edited) They are some Hella boxes I got off of Amazon and the big fuses at the bottom are some meant for audio equipment http://www.amazon.com/gp/product/B0091VHLW4/ref=oh_details_o08_s00_i00?ie=UTF8&psc=1 http://www.amazon.com/gp/product/B000VUEDXY/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1 http://www.amazon.com/gp/product/B000VU9D20/ref=oh_details_o06_s00_i00?ie=UTF8&psc=1 Edited February 27, 2014 by leesfer Quote Link to comment Share on other sites More sharing options...
leesfer Posted February 27, 2014 Author Report Share Posted February 27, 2014 (edited) Here is the diagram that I created for my wiring I just didn't put in the relay for the electric fan in the diagram, but I have it wired in the pictures above http://i.imgur.com/sxouYms.png Edited December 5, 2014 by leesfer Quote Link to comment Share on other sites More sharing options...
R-R-Quest Posted February 27, 2014 Report Share Posted February 27, 2014 These are way nicer than the parts-store version. Quote Link to comment Share on other sites More sharing options...
scott87star Posted February 27, 2014 Report Share Posted February 27, 2014 Nice job! Quote Link to comment Share on other sites More sharing options...
leesfer Posted February 27, 2014 Author Report Share Posted February 27, 2014 (edited) Nice job! Thanks dude, couldn't have gotten this far without your expertise Now I just have to figure out how I am going to mount in in the car... Edited February 27, 2014 by leesfer Quote Link to comment Share on other sites More sharing options...
MasterVivi Posted May 10, 2014 Report Share Posted May 10, 2014 I'm watching your dashboard progress like a hawk! Keep me posted, and let's hang out soon! I'd love to come over and finally check out your sleeping beast. Quote Link to comment Share on other sites More sharing options...
leesfer Posted November 29, 2014 Author Report Share Posted November 29, 2014 After another long break, I felt the spirit of the Starion and got back to work Still working out the wiring but I have it pretty much figure out and now just laboring through it http://i.imgur.com/fwbfKKB.jpg Quote Link to comment Share on other sites More sharing options...
MasterVivi Posted November 29, 2014 Report Share Posted November 29, 2014 I wish I had a garage! Quote Link to comment Share on other sites More sharing options...
leesfer Posted November 30, 2014 Author Report Share Posted November 30, 2014 (edited) FINALLY got the MSD and my new fuses all wired up, feels like I am getting close now Just waiting on a few more small items in the mail to finish things up Still need to do:Wire up battery in the trunk Connect ignition/key Run vacuum lines for everything Connect oil in and drain for turbo Finish connecting harness ends to everything (TPS, injectors, boost controller) Fix down pipe (it's hitting the block) and wire up wideband Connect blow-off valveConnect fuel linesThat's all I can think of off the top of my head, then should be able to crank and see what happens http://i.imgur.com/VT9Ia13.jpghttp://i.imgur.com/izEiaye.jpg Edited November 30, 2014 by leesfer Quote Link to comment Share on other sites More sharing options...
leesfer Posted December 5, 2014 Author Report Share Posted December 5, 2014 Updated my wiring diagram in post #113 Quote Link to comment Share on other sites More sharing options...
leesfer Posted December 6, 2014 Author Report Share Posted December 6, 2014 Started on the new center console today http://i.imgur.com/eRzmlxc.jpg Quote Link to comment Share on other sites More sharing options...
cristarion Posted December 8, 2014 Report Share Posted December 8, 2014 are you selling any of the old engine parts? Quote Link to comment Share on other sites More sharing options...
leesfer Posted December 8, 2014 Author Report Share Posted December 8, 2014 are you selling any of the old engine parts? Anything that I was selling has been sold already Quote Link to comment Share on other sites More sharing options...
leesfer Posted December 24, 2014 Author Report Share Posted December 24, 2014 Re made my center console and started the interior work. More on that in this thread: http://www.starquestclub.com/forum/index.php?showtopic=145812 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.