dem0ntsi Posted January 31, 2012 Report Share Posted January 31, 2012 I still have them, but they are only used for car shows and such, I cant risk getting them stolen etc.. yeah I had about 5 set of rims at one point hahaha.. only have 2 now. The first pic is with MK1 shocks and Cosmo coil overs.. thats as low as they would go, as you can see the rear was still high. The sig pic is with D2s and I think I still have a couple of inches to spare to go lower. Much better in every way than the Cosmos. Link to comment Share on other sites More sharing options...
dem0ntsi Posted January 31, 2012 Report Share Posted January 31, 2012 pic from this weekend Nice! Nismo LM's? Link to comment Share on other sites More sharing options...
BOOSTED88tsi Posted January 31, 2012 Report Share Posted January 31, 2012 rota p45rs probably. Link to comment Share on other sites More sharing options...
nomad Posted January 31, 2012 Report Share Posted January 31, 2012 (edited) http://i289.photobucket.com/albums/ll231/nomad1856/bbssiged-1.jpghttp://i289.photobucket.com/albums/ll231/nomad1856/IMG_3349.jpgCosmo's. MK1 camber plates. MR2 Agx up front. KYB Gr2s in the back. Can go 2 inches lower front and 3 back.http://i289.photobucket.com/albums/ll231/nomad1856/1027001600.jpg Edited January 31, 2012 by nomad Link to comment Share on other sites More sharing options...
gottraction Posted January 31, 2012 Author Report Share Posted January 31, 2012 yea rota p45r's 9.5 all around with spacers Link to comment Share on other sites More sharing options...
DieHARDmitsu. Posted February 5, 2012 Report Share Posted February 5, 2012 Here it is when I bought it...Previous owner was an r'tard and put the springs in backwards, hence the rake and major front tuckage on just eibach springs. http://i512.photobucket.com/albums/t324/polarisman14/StarQuest/conquest2-2.jpg http://i512.photobucket.com/albums/t324/polarisman14/StarQuest/DSCF0326.jpg Here it is now, bottomed out on Ground Control coilovers on Mookeeh struts w/Mookeeh camber plates in rear and pillow ball camber plates up front. I could go further but that would involve removing the top hat or adjustable part of the lower collar and figuring something out that way...Would rather keep the adjustability.How does it ride with the GC/mookeeh combo? Link to comment Share on other sites More sharing options...
polarisman14 Posted February 5, 2012 Report Share Posted February 5, 2012 Pretty good, I just recently got the car running MPI and was just driving it around the neighborhood but it seemed pretty nice. About the same as the eibachs and stock struts, and that was after going with lower profile tires and anti-roll bars (which make it handle better but really didn't sacrifice any comfort). Link to comment Share on other sites More sharing options...
sellerfeller Posted June 4, 2012 Report Share Posted June 4, 2012 (edited) D2'S... plasti dip rims. http://imagehostplus.com/v2/usr/1853/IMG_9387.jpg http://imagehostplus.com/v2/usr/1853/IMG_9397.jpg Edited August 14, 2012 by sellerfeller Link to comment Share on other sites More sharing options...
tankbob Posted June 4, 2012 Report Share Posted June 4, 2012 I used to be really against lowering me car but this thread has definetly changed my mind, starquests look good low. What height would you guys say keeps the comfortability that you arnt going to lose your airdam in regular driving but is still lower than stock? And seeing as I already scrape my tailpipe a little going into the driveway what do you guys recommend? Link to comment Share on other sites More sharing options...
Crazy Quest Posted June 4, 2012 Report Share Posted June 4, 2012 on eibachs bro's http://i277.photobucket.com/albums/kk59/crazy8t/IMAG0091-2.jpg Link to comment Share on other sites More sharing options...
attack vector Posted June 13, 2012 Report Share Posted June 13, 2012 2" drop on D2's, ST swaybars and Stedibani bushings.Will eventually have the car stanced... just haven't found the right wheels yet. http://www.attackvector.com/proofs/Starion_Story/seattle_update_06/Old_School_reunion_2011/OSR_004.jpghttp://www.attackvector.com/proofs/Starion_Story/seattle_update_06/Old_School_reunion_2011/OSR_002.jpg Link to comment Share on other sites More sharing options...
Tman Posted June 13, 2012 Report Share Posted June 13, 2012 Link to comment Share on other sites More sharing options...
StallionProject86 Posted June 14, 2012 Report Share Posted June 14, 2012 Here she is on eibach sport springs. http://i874.photobucket.com/albums/ab308/LAJits-media/The%2086/IMG_8915edit.jpg Link to comment Share on other sites More sharing options...
tankbob Posted June 14, 2012 Report Share Posted June 14, 2012 I was looking at my car and thinking about what it would look lowered and I noticed that if it was any lower it might look funny that the rear wheels are tucked in so much. Do you guys use spacers? Link to comment Share on other sites More sharing options...
conquestador89 Posted June 14, 2012 Report Share Posted June 14, 2012 ^yea...hubcentric spacers Link to comment Share on other sites More sharing options...
polarisman14 Posted June 14, 2012 Report Share Posted June 14, 2012 http://i512.photobucket.com/albums/t324/polarisman14/StarQuest/image010-1.jpg http://i512.photobucket.com/albums/t324/polarisman14/StarQuest/image002-5.jpg http://i512.photobucket.com/albums/t324/polarisman14/StarQuest/image005-4-1.jpg http://i512.photobucket.com/albums/t324/polarisman14/StarQuest/image007-3.jpg I'm gonna put another half inch of poke on each side in the rear and remove the coil spring perches which should drop it down another 3/8" of an inch (my estimate as to the thickness of the perches). Link to comment Share on other sites More sharing options...
tankbob Posted June 15, 2012 Report Share Posted June 15, 2012 I dig the metal plate above the exhaust I need one of those, lol ^ Link to comment Share on other sites More sharing options...
polarisman14 Posted June 15, 2012 Report Share Posted June 15, 2012 Yeah that has been pretty hit or miss so far--made it myself out of some aluminum flashing and an old chrome shift bezel I had laying around from my Hurst shifter on my pickup. I'll have to use the frame as a template and make one out of stainless or aluminum as that one is starting to corrode already. Oh well. Link to comment Share on other sites More sharing options...
DurbenQuest Posted June 15, 2012 Report Share Posted June 15, 2012 I used to be really against lowering me car but this thread has definetly changed my mind, starquests look good low. What height would you guys say keeps the comfortability that you arnt going to lose your airdam in regular driving but is still lower than stock? And seeing as I already scrape my tailpipe a little going into the driveway what do you guys recommend?With D2's you can go as low as you want and if you set up the spring rate right it will still be comfortable. As for the driveway, place 2x4s where you drive up. "Low Life" Link to comment Share on other sites More sharing options...
boostin20lbs Posted June 20, 2012 Report Share Posted June 20, 2012 http://i267.photobucket.com/albums/ii311/mikehunts/sexyness/270932_10150972717626726_1729704497_n.jpghttp://i267.photobucket.com/albums/ii311/mikehunts/sexyness/248152_10150968207066726_660267019_n.jpg Link to comment Share on other sites More sharing options...
kinree Posted June 27, 2012 Report Share Posted June 27, 2012 http://i1231.photobucket.com/albums/ee501/Fiorness/2012-06-25_20-45-01_705.jpghttp://i1231.photobucket.com/albums/ee501/Fiorness/2012-06-25_20-45-16_997.jpg Link to comment Share on other sites More sharing options...
Caliber308 Posted August 1, 2012 Report Share Posted August 1, 2012 D2s 1 Link to comment Share on other sites More sharing options...
sleeper tsi Posted August 1, 2012 Report Share Posted August 1, 2012 also see sig http://i197.photobucket.com/albums/aa264/jsinaga/89baltic.jpg. Those r some awesome rims:) Link to comment Share on other sites More sharing options...
OBSESSIVE_ENT. Posted August 6, 2012 Report Share Posted August 6, 2012 well i love Micky D too much to drop lower than stock and i live in NY anddddddd front skirts are a fortune. But I would love to have it done. Link to comment Share on other sites More sharing options...
TexasQuest Posted August 6, 2012 Report Share Posted August 6, 2012 I used to be really against lowering me car but this thread has definetly changed my mind, starquests look good low. What height would you guys say keeps the comfortability that you arnt going to lose your airdam in regular driving but is still lower than stock? And seeing as I already scrape my tailpipe a little going into the driveway what do you guys recommend?Lowering springs for sure. I'm dropped on ST's and my 3" exhaust hits the ground sometimes. I want coilovers but second guess sometimes when I scrape lol. Link to comment Share on other sites More sharing options...
Recommended Posts