enolcys Posted January 5, 2012 Report Share Posted January 5, 2012 88 Mitsubishi Conquest/ Starion project car. Car is in pieces and not together. I have 95%-97% of the parts needed to put it together however I am willing to part it out or sell as a whole. I am very sad to part with this car and god knows I have resisted selling for about 8 years now. However it is time for this car to go. I bought the car running and used it daily. I took it apart about 8 years ago and have never gotten it together. I had many changes in my life that prevented it from ever getting finished. I invested about 10000 easy. If you already have nice Conquest and just want a sick street strip race engine and all the suspension to go with it you would need nothing just transfer the parts into yours. I have a lot of performance options. Here is a list: Completely rebuilt 2.6 G54B bored .40 overBlock Decked and O-ringed by Pat Musi racingCopper Head gasketHead ported and polished by Pat Musi RacingJet valve elimination kit installedCeramic coated Clevite main bearingsCeramic coated pistons both top and sides by Swain TechCeramic coated main bearings by Swain TechCeramic coated piston rings by Swain TechCeramic coated TEP SS camshaftCrank lightened and balanced .10 under by Gemini Bros RacingPistons and rods matched and balancedBalance shafts eliminatedHeavy duty valve springsARP head studs and Main StudsTEP High Volume Oil PumpPorted throttle body with new stock injectorsFull 2.5 inch HKS exhaust with hi flow cat (need down pipe)Torque Master spark plugs (brand new)Suspension Techniques front and rear oversized sway barsStrut tower braceTokio Strut all around (stiff as hell)Ebach lowering springs front and rearStainless steel brake linesRPS turbo clutchBosch 500 hp fuel pumpBosch high output coilManual boost controllerK&N air filter with modified air box3 Row radiators3 wire O2 sensorFully adjustible fuel pressure regulator ( I had this part and cant find it now. However if I Find it while cleaning or getting things together its yours. You can get a FPR from Top End Racing. That’s where I got mine.)16 G Turbo Perfect condition with less than 8000 miles on it4 Brand New Cross drilled rotorsNew Front CalipersNew Steering rack and ball jointsNew tie rod endsNew Pitman armNew drive shaft universal jointsFly wheel resurfacedRear drained and filled with new synthetic gear oilCar completely undercoatedGas tank undercoated and paintedABS eliminated (this is a good thing on this car) And I think that’s it I may have a few other little things I forgot to mention. The car and the engine has been garaged. However the interior is pretty bad. Body is decent with one small low speed dent on the passenger side. But its easily fixable I am sure. The color is white but if you use this body you will probably want to repaint it. the only part I am missing for sure is the driver’s side front brake caliper bracket. But I have 2 new brake calipers, just needs the bracket. You can probably get it in a junk yard. I just can´t let something like this go to waste so if I can´t finish it I am hoping someone can. I would love to see it run. The engine is like no other built. I tried to build it so it could handle anything I could throw at it. I can vouch for the quality it was professionally built by professional racers all the way. However the car has never run only because of lack of funds and bad luck really…..Make me an offer for the whole car or any part…. No matter what you offer me it is embarrassing to admit that it will be only a fraction of what I have invested. I had posted this a few months back as well, however I decided to try and finish the car instead of sell. But I was still unable to finish it. I did get a lot further with it. Before I didn’t have the turbo now I do and it is nice. I also put a lot of the body and suspension together. All that needs to be done really is drop the engine in and bolt up the trans.…However I am moving out of the country and can no longer work on this project..… It is still on that same engine stand. I have been turning it every once in a while dreaming about getting it running and also because I don’t want it to sit like that. I can send pics if you interested. I would like 3000 for everything or you can make offers on the parts. price is negotable. PLEASE DONT LET THIS GO TO WASTE. I HAVE WORKED SO HARD... but life sucks and sometimes dreams die for various reasons. but you can benifit from what I failed to finish... I really want to cry now.... e mial me at---- damiannj@yahoo.com Quote Link to comment Share on other sites More sharing options...
slydogg Posted January 5, 2012 Report Share Posted January 5, 2012 location Quote Link to comment Share on other sites More sharing options...
KT Posted January 5, 2012 Report Share Posted January 5, 2012 (edited) Post pics and your location. Without, you'll probably not get any movement on this or any other board. If "it was professionally built by professional racers all the way", you should have receipts and specs to go with it, which will add traction to your for sale add. Honestly, you really can't "vouch" for anything credibly with only two years of membership and 6 posts. Edited January 5, 2012 by KT Quote Link to comment Share on other sites More sharing options...
TopDawg_43 Posted January 5, 2012 Report Share Posted January 5, 2012 This is posted twice. Quote Link to comment Share on other sites More sharing options...
mistapickles Posted January 5, 2012 Report Share Posted January 5, 2012 I'd probably buy the diff if I knew where you were and there were prices posted.... Quote Link to comment Share on other sites More sharing options...
Earl Posted January 5, 2012 Report Share Posted January 5, 2012 If you put up pics of everything there are multiple thigns I'd buy upon seeing thme=) Quote Link to comment Share on other sites More sharing options...
TainterRacing Posted January 5, 2012 Report Share Posted January 5, 2012 Ceramic coated TEP SS camshaft? why would they make a SS camshaft? Quote Link to comment Share on other sites More sharing options...
randy Posted January 5, 2012 Report Share Posted January 5, 2012 contact ya. Quote Link to comment Share on other sites More sharing options...
infamos Posted January 5, 2012 Report Share Posted January 5, 2012 How much for the 16g turbo? Quote Link to comment Share on other sites More sharing options...
infamos Posted January 5, 2012 Report Share Posted January 5, 2012 How much for the Strut tower brace? Quote Link to comment Share on other sites More sharing options...
89whitetsi Posted January 5, 2012 Report Share Posted January 5, 2012 U need housings and spindles Quote Link to comment Share on other sites More sharing options...
303starion Posted January 6, 2012 Report Share Posted January 6, 2012 How much for the engine? Quote Link to comment Share on other sites More sharing options...
verde2002 Posted January 6, 2012 Report Share Posted January 6, 2012 Interested in engine and strut tower bar. PM me with info and prices. Quote Link to comment Share on other sites More sharing options...
geechee Posted January 18, 2012 Report Share Posted January 18, 2012 hi, i would like to know how much do you want for the hard pipe kit, would you contact me at 770-771-3928. thank you. Quote Link to comment Share on other sites More sharing options...
Fuze Posted January 24, 2012 Report Share Posted January 24, 2012 Ceramic coated TEP SS camshaft? why would they make a SS camshaft? SS meaning "Street/Strip". Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.