MonkeyLover Posted February 12, 2010 Report Share Posted February 12, 2010 50cfm!? Pfft...yeah...that's certainly nothing to worry about. Hmm...alright, well...thank you for the information. I'll definitely be looking in to this route instead. Quote Link to comment Share on other sites More sharing options...
dntbther Posted February 14, 2010 Report Share Posted February 14, 2010 im keeping this page locked in a safe. Quote Link to comment Share on other sites More sharing options...
ragdoll_unlimited Posted February 16, 2010 Author Report Share Posted February 16, 2010 sorry to inform everyone but im waiting on the new shipment of exhaust housing to arrive and also the machine shop is backed up. its going to take 2-3 weeks for the new exhaust housings for the tdo5h wheels to show up and 2 weeks for the machine shop to finish up the MASSIVE order i recieved in the last week. send me a pm or shoot me an email at julian_dude@hotmail.com if you have any concerns... Quote Link to comment Share on other sites More sharing options...
bmx152 Posted February 21, 2010 Report Share Posted February 21, 2010 how much for an evo3 16g if i send a core? Quote Link to comment Share on other sites More sharing options...
ragdoll_unlimited Posted February 21, 2010 Author Report Share Posted February 21, 2010 how much for an evo3 16g if i send a core? $400 as long as the core arrives undamaged and isnt blown up beyond all reason. Quote Link to comment Share on other sites More sharing options...
pitboss Posted February 21, 2010 Report Share Posted February 21, 2010 yeah i'll be looking in on this one too from time to time. I like the idea of a ported TDO05H 17C on my auto quest. Quote Link to comment Share on other sites More sharing options...
bmx152 Posted February 22, 2010 Report Share Posted February 22, 2010 how much without a core? and what about a reg 16g with and without core Quote Link to comment Share on other sites More sharing options...
ragdoll_unlimited Posted February 22, 2010 Author Report Share Posted February 22, 2010 the prices listed about are with cores, with is and additional $50. if you send me a core that gets damaged in shipping i charge an additional $50 because everyone should know better. so if it gets damaged in shipping of you dont send one, just add $50 onto the prices above... Quote Link to comment Share on other sites More sharing options...
bronick65 Posted March 5, 2010 Report Share Posted March 5, 2010 how much for the 14 shipped to 30536, have 12a and another turbo that works great but has to much boost for my quest would trade both if interested Quote Link to comment Share on other sites More sharing options...
PDodson Posted March 22, 2010 Report Share Posted March 22, 2010 I just sent my 16g turbo to him to rebuild Quote Link to comment Share on other sites More sharing options...
AlexNYC Posted May 1, 2010 Report Share Posted May 1, 2010 (edited) Still waiting on my 16g, would like to have an update. If you send it, please let me have a tracking number. I was told you were going to send it on monday 4/26. I text you my address, please let me know if you need me to send it again. payment sent on March 5. email me at; for instant reply, aochoa@medtekcontrancting.com. Thank you. Edited June 18, 2010 by AlexNYC Quote Link to comment Share on other sites More sharing options...
Knight of Mopar Posted May 1, 2010 Report Share Posted May 1, 2010 Still waiting on my 16g, would like to have an update. If you send it, please let me have a tracking number. I was told you were going to send it on monday 4/26. I text you my address, please let me know if you need me to send it again. payment sent on March 5. email me at; alexanderochoa@yahoo.com or for instant reply, aochoa@medtekcontrancting.com. Thank you. Waiting on my 18g and exhaust housing as well. Said he would ship it friday have not heard anything from him. Seems like a very busy guy :shrug: Quote Link to comment Share on other sites More sharing options...
Dad Posted May 2, 2010 Report Share Posted May 2, 2010 Julian? You there? Dad Quote Link to comment Share on other sites More sharing options...
fastfail Posted May 2, 2010 Report Share Posted May 2, 2010 Yeah, waiting on my Evo3 16g still as well, he said he was waiting on the machine shop and that was on the 27 of April, so he should be getting some done here soon. Quote Link to comment Share on other sites More sharing options...
JohnnyWadd Posted May 2, 2010 Report Share Posted May 2, 2010 whay is it the "evo3 16g" spools so fast? its a big 16g right? a tdo5h? i was just wondering because i was going to stay away from a s16g and get my 14b built from the parts i sent. let me know Quote Link to comment Share on other sites More sharing options...
AlexNYC Posted May 3, 2010 Report Share Posted May 3, 2010 (edited) ?I though I would post this for everyone. I'm sorry if this is crossing any lines, not my intention. I send Julian a message concerning my purchased. I realized he might be going thru stuff as anyone would. I have no problem on waiting as long as he doesn't forget us. Julian, no disrespect to you, I though I would let the rest know that you haven't forgot us. Thank you, hope you find something. ragdoll_unlimited ? Sent Today, 12:57 AM?Member im really sorry, what can i do to reassure you? dont worry about it, i just have alot of stuff going on and im trying to make you guys my number 1 priority.?? ????? Group: Members Posts: 365 Joined: 18-June 09 Edited May 3, 2010 by AlexNYC Quote Link to comment Share on other sites More sharing options...
glink13 Posted May 3, 2010 Report Share Posted May 3, 2010 Need a little guidance for choosing a turbo upgrade. I have an 87 Conquest running a stock 12a on stock internals and head (with jet valves) but have installed the following upgrades: 1) upgraded fuel mapping (from 88-89), new fuel filters, stock pump.2) flex downpipe, high flow cat and 3" exhaust, Magnaflow muffler.3) *DM HP kit, OVCP, crankvent kit, K&N Filter. 4) MSD Red Coil, new 7mm wires, plugs, and distributor cap.5) lightened flywheel and stage II clutch.6) upgraded intercooler and piping.7) MBC and Turbo XS BOV. My car runs excellent, runs cool, and no issues at all to speak of over the past 2 years. I kicks fairly hard at low RPM (set at 12psi) but like all 12a's it falls on it's face on the mid-high end. I'm not boosting all the time, but have to admit I want more "pull" on the mid-high end when I do get on it. Other than to replace the stock head at some point, the turbo is the only upgrade left I plan to do on my car. Can I hear from some SQ members? Quote Link to comment Share on other sites More sharing options...
ragdoll_unlimited Posted May 4, 2010 Author Report Share Posted May 4, 2010 Need a little guidance for choosing a turbo upgrade. I have an 87 Conquest running a stock 12a on stock internals and head (with jet valves) but have installed the following upgrades: 1) upgraded fuel mapping (from 88-89), new fuel filters, stock pump.2) flex downpipe, high flow cat and 3" exhaust, Magnaflow muffler.3) *DM HP kit, OVCP, crankvent kit, K&N Filter. 4) MSD Red Coil, new 7mm wires, plugs, and distributor cap.5) lightened flywheel and stage II clutch.6) upgraded intercooler and piping.7) MBC and Turbo XS BOV. My car runs excellent, runs cool, and no issues at all to speak of over the past 2 years. I kicks fairly hard at low RPM (set at 12psi) but like all 12a's it falls on it's face on the mid-high end. I'm not boosting all the time, but have to admit I want more "pull" on the mid-high end when I do get on it. Other than to replace the stock head at some point, the turbo is the only upgrade left I plan to do on my car. Can I hear from some SQ members? i think you might like a small 16g, fast spool and good pull all the way up top. Quote Link to comment Share on other sites More sharing options...
Soopaquest87 Posted May 4, 2010 Report Share Posted May 4, 2010 i think you might like a small 16g, fast spool and good pull all the way up top. Hey how much would a Small 16g cost me? i have a Brand new 12a from MHI and need a small 16g for my project. Thx Quote Link to comment Share on other sites More sharing options...
JohnnyWadd Posted May 5, 2010 Report Share Posted May 5, 2010 the reason the evo3 is such a great turbo is because of the flow it produces and how fast it makes it. on the g54b it would be a very good combo, the only problem is that it spools to quickly. when it comes into boost it turns and immediate 26psi out and some people may not like the instant max boost response they get. what exactly is a evo 3? why does it spool so quick? is it a s16g? Quote Link to comment Share on other sites More sharing options...
ragdoll_unlimited Posted May 5, 2010 Author Report Share Posted May 5, 2010 no its a tdo5 exhaust wheel and a evo3 16g turbing wheel which is bigger than a super 16g. it spools so fast because the exhaust wheel is the same size as the stock 12a Quote Link to comment Share on other sites More sharing options...
conquezzy Posted May 6, 2010 Report Share Posted May 6, 2010 12a $17514g $27516g $325 evo3 16g td05h $40017c $40019c $500fp green$600for the option of $100 i offer td05h upgrades for the 17c and the 19c. i also take money off for more than one core exchange!can you post pics of these that you offer? Quote Link to comment Share on other sites More sharing options...
JohnnyWadd Posted May 6, 2010 Report Share Posted May 6, 2010 no its a tdo5 exhaust wheel and a evo3 16g turbing wheel which is bigger than a super 16g. it spools so fast because the exhaust wheel is the same size as the stock 12a i see. i should have the done to one of the 12a's i sent you. sounds like a easier upgrade not having to machine the turbine housing for a bigger wheel, just the compressor housing. Quote Link to comment Share on other sites More sharing options...
ragdoll_unlimited Posted May 6, 2010 Author Report Share Posted May 6, 2010 i see. i should have the done to one of the 12a's i sent you. sounds like a easier upgrade not having to machine the turbine housing for a bigger wheel, just the compressor housing. so why dont you? Quote Link to comment Share on other sites More sharing options...
ragdoll_unlimited Posted May 6, 2010 Author Report Share Posted May 6, 2010 can you post pics of these that you offer? not right now, alot of them are made to order. on the next set i will be able to! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.