jared01 Posted December 21, 2009 Report Share Posted December 21, 2009 (edited) I am selling everything i have for my '87 starion. Have many things and willing to get rid of cheap I live Ft.Collins Colorado, 80526 I am willing to negotiate on all parts so don't be afraid to make an offer!! I am moving to Australia on January 3ed so all HAS to go! Everything with new in box means it has never been bolted o Rolling chassisold ecu with no boost cut off 89 and stock 872 transmissions (87 and 89)extra rimsboost compensating fuel pressure regulator new in boxstock gauges with 30 vacuum and 30 boost inlaid in old boost locationsteel braided oil supply and oil return lines new in boxengine grounding kit new in boxintercooler tested to 30 psiany parts off a 1987 Mitsubishi starionextra rear trunk glassextra windowes E-MAIL me at jared7467@hotmail.com for price questions would prefer not to ship but will on smaller items Edited January 1, 2010 by jared01 Quote Link to comment Share on other sites More sharing options...
psu_Crash Posted December 21, 2009 Report Share Posted December 21, 2009 Where are you located at? Per the forum rules: "3. State your location. If you're worried about privacy, at least provide a general location (City/State or Zip Code). If this information is in your profile, that will be considered adequate. Failure to do so will result in deletion of your thread." Also if you want to sell your parts quickly you have a much better chance by listing a price here. Just trying to help out. Quote Link to comment Share on other sites More sharing options...
jwbrocloud Posted December 21, 2009 Report Share Posted December 21, 2009 What kind of "mpi intake"??? Quote Link to comment Share on other sites More sharing options...
newquest86 Posted December 21, 2009 Report Share Posted December 21, 2009 does anyone know this mystery person ? Quote Link to comment Share on other sites More sharing options...
smallblock12 Posted December 21, 2009 Report Share Posted December 21, 2009 pics of anything? Quote Link to comment Share on other sites More sharing options...
jared01 Posted December 22, 2009 Author Report Share Posted December 22, 2009 What kind of "mpi intake"???It is the EPI mulit port intake already modified by chad. comes with gasket. no fuel rail or injectors. Quote Link to comment Share on other sites More sharing options...
jared01 Posted December 22, 2009 Author Report Share Posted December 22, 2009 I am new to this site and if u guys can help me i have picts of all my parts and will post them asap if i can figure out how to post the pictures. If u guys want u can call my cell phone at 970-227-7944 Quote Link to comment Share on other sites More sharing options...
domesticslayer83 Posted December 22, 2009 Report Share Posted December 22, 2009 i know it says you dont want to ship but would you ship the turbo timer and harness it would fit in one of the usps small flat rate boxes i have paypal ready to go if youre willing and youre price is right Quote Link to comment Share on other sites More sharing options...
jared01 Posted December 22, 2009 Author Report Share Posted December 22, 2009 i know it says you dont want to ship but would you ship the turbo timer and harness it would fit in one of the usps small flat rate boxes i have paypal ready to go if youre willing and youre price is right Turbo timer and harness for $100 that includes shipping! never used still in box! Quote Link to comment Share on other sites More sharing options...
domesticslayer83 Posted December 23, 2009 Report Share Posted December 23, 2009 i'll get with ya after the holiday bro i want that Quote Link to comment Share on other sites More sharing options...
starzky Posted December 23, 2009 Report Share Posted December 23, 2009 How much for the Stage 3 clutch 6 puck sprung disk with new pilot and throw out bearing plus shipping to 92630. do you have pictures?How 'bout the motor how much? Quote Link to comment Share on other sites More sharing options...
substock Posted December 23, 2009 Report Share Posted December 23, 2009 pm sent about head Quote Link to comment Share on other sites More sharing options...
jared01 Posted December 23, 2009 Author Report Share Posted December 23, 2009 (edited) How much for the Stage 3 clutch 6 puck sprung disk with new pilot and throw out bearing plus shipping to 92630. do you have pictures?How 'bout the motor how much? For the clutch set up it will be $150 that will include shipping. I paid 300 for it new. I want $2000 for the motor I have put $3500 into it easily but shipping will be outrageous pick up is preferred willing to negotiate an motor a little comes with motor stand too. Let me now asap what u want so i can pack and ship out asap! Edited December 23, 2009 by jared01 Quote Link to comment Share on other sites More sharing options...
Jms Posted December 23, 2009 Report Share Posted December 23, 2009 (edited) Jared, How much for the steel braided supply and return lines, delivered to Florida? Are these the ones for the Turbo? Also who was the supplier? Good luck in Australia. Rgds,Jms Edited December 23, 2009 by Jms Quote Link to comment Share on other sites More sharing options...
RGAV8R Posted December 24, 2009 Report Share Posted December 24, 2009 (edited) What brand is the clutch and is it a 240mm? Sent you a PM Edited December 24, 2009 by RGAV8R Quote Link to comment Share on other sites More sharing options...
jared01 Posted December 24, 2009 Author Report Share Posted December 24, 2009 Jared, How much for the steel braided supply and return lines, delivered to Florida? Are these the ones for the Turbo? Also who was the supplier? Good luck in Australia. Rgds,JmsYes these are the ones for the turbo! I ordered them a while ago from ebay not sure who from i think moheekin. they will be $80 that includes shipping! Quote Link to comment Share on other sites More sharing options...
jared01 Posted December 24, 2009 Author Report Share Posted December 24, 2009 (edited) What brand is the clutch and is it a 240mm? Sent you a PM It is a 2400mm made to fit the '88 '89 starquest. I also have a fidenza flywheel. the 6 puck is a clutch net and the pressure plate is 2100lb not sure who by comes with new pilot and throw out. clutch kit is $150 that includes shipping let me know if ur interested in anything else Edited December 24, 2009 by jared01 Quote Link to comment Share on other sites More sharing options...
Tim_C. Posted December 25, 2009 Report Share Posted December 25, 2009 Location?!!Tried calling your cell but no answer. It's Christmas, so maybe you weren't available. My area code is the same as yours. I may be able to pick something up, like the engine? Quote Link to comment Share on other sites More sharing options...
jared01 Posted December 26, 2009 Author Report Share Posted December 26, 2009 Location?!!Tried calling your cell but no answer. It's Christmas, so maybe you weren't available. My area code is the same as yours. I may be able to pick something up, like the engine?I am located in Fort Collins Colorado, 80526 Quote Link to comment Share on other sites More sharing options...
Tim_C. Posted December 26, 2009 Report Share Posted December 26, 2009 What condition is the engine, new, never ran, etc...? It is on a stand, but that doesn't really say much?Were the rotating parts balanced? What size bearings are in it, what is the bore size, and if stock, what prep was done to the cylinders. Was the block properly cleaned out at the machine shop, like acid dipped. Did the shop assemble it? etc...Please elaborate on the work performed, etc...? Quote Link to comment Share on other sites More sharing options...
jared01 Posted December 26, 2009 Author Report Share Posted December 26, 2009 What condition is the engine, new, never ran, etc...? It is on a stand, but that doesn't really say much?Were the rotating parts balanced? What size bearings are in it, what is the bore size, and if stock, what prep was done to the cylinders. Was the block properly cleaned out at the machine shop, like acid dipped. Did the shop assemble it? etc...Please elaborate on the work performed, etc...?brand new never ran on a motor stand crank was balanced after rebuild. had all the bearings replaced (crank and rod). It was put together by US performance and machine in Loveland Colorado. it has Wiseco piston kit K555M92 compression height: 1.039 Bore size: 3.622. 274 street strip cam in a new maranal head with 1mm oversized intake and exhaust valves. 1.6 ratio roller rockers. New valve springs arp rod and head bolts. have all specs for pistons and cam. Engine was acid washed and cleaned block was honed and decked. enging has been inside and lubricated and in a plastic bag for safe storage. Jared Quote Link to comment Share on other sites More sharing options...
Tim_C. Posted December 26, 2009 Report Share Posted December 26, 2009 Very good, thanks for the info! I am contemplating going up there to get it, but I don't know if I can get a truck to do it with. We'll see. So you have to get rid of it this week? I'll call you again. Or you can call me, no problem. Quote Link to comment Share on other sites More sharing options...
BMWTech Posted December 29, 2009 Report Share Posted December 29, 2009 Hey I'm looking for a few parts let me know if you can help, shipping is to 33417- driverside window switch- left side headlight switches- good rear brake calipers- power rear antenna Thanks, Neil Quote Link to comment Share on other sites More sharing options...
Tim_C. Posted December 30, 2009 Report Share Posted December 30, 2009 Verbal deal made for complete engine, new fidanza with clutch set, and some other parts. Quote Link to comment Share on other sites More sharing options...
Tim_C. Posted December 30, 2009 Report Share Posted December 30, 2009 I am selling everything i have for my '87 starion. Have many things and willing to get rid of cheap I live Ft.Collins Colorado, 80526 I am willing to negotiate on all parts so don't be afraid to make an offer!! I am moving to Australia on January 3ed so all HAS to go! Everything with new in box means it has never been bolted on! fully built motor: w/ motor stand8:1 pistons274 cambalance shaft eliminationshot peened rodsarp rod boltsmaranal head port and polishedoversize valvesmpi intake- sold Rolling chassisold ecu with no boost cut off 89 and stock 872 transmissions (87 and 89)turbo timer apex w/harness new in boxextra rimsfidenza flywheel new in boxboost compensating fuel pressure regulator new in boxStage 3 clutch 6 puck sprung disk with new pilot and throw out bearing new inboxstock gauges with 30 vacuum and 30 boost inlaid in old boost locationdizzy distributor new in boxsteel braided oil supply and oil return lines new in boxwater pump new in boxengine grounding kit new in boxintercooler tested to 30 psiany parts off a 1987 Mitsubishi starionextra rear trunk glassextra windowes E-MAIL me at jared7467@hotmail.com for price questions would prefer not to ship but will on smaller items Just a reference post. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.