jolyrgr Posted May 19, 2009 Report Share Posted May 19, 2009 (edited) I have FINALLY heard back from the manufacturer, and received the pricing breakdown on the previously posted lines Any one kit will replace both of the factory hard/rubber lines from the oil manifold to the oil cooler and return. FULL KIT 2 EXAMPLE http://img522.imageshack.us/img522/5363/oilcoolerlines2.jpg Kit one(represented by the line below in silver) does so with clear or colored cover on stainless steel braided Teflon -6 line and -6an to banjo fittings on both lines, with the appropriate washers and new banjo bolts. Kit two (represented by the line in black)has the same high quality line, in the same lengths, but with one banjo and one 90 degree -6 crimped on end going to a steel adapter. The ends are "interchangeable" so that you can flip the 90 degree fitting to either the oil cooler end, or the oil manifold end. This also has all the needed bolts and washers Kit three(represented by the line in red) is once again the same length of high quality line, but with a 90 degree crimped on both ends of both lines. Just like the other offerings, all the needed fittings and washers for installation are included. http://img218.imageshack.us/img218/1291/oilcoolerlines01.jpg The regular pricing for these is as follows (in US $). All kits include 48 state shipping: KIT 1 $155.00 KIT 2 $151.00 KIT 3 $148.00 THESE KITS ARE NOT YET IN STOCK, as I am just getting the offering going, but they will be available in CLEAR, RED, BLACK, AND BLUE (not pictured, back-ordered at the time of pictures). Banjo fittings in silver or blue. A Group purchase can be set up for these if there is enough interest. We would need at least 15 orders (regardless of kit or color) to make discounts available. Contact myself or UlrichWolf for payment details. PayPal and Postal Money Orders accepted. JR edited for clarity. Edited May 24, 2009 by jolyrgr Quote Link to comment Share on other sites More sharing options...
dmyers151 Posted May 19, 2009 Report Share Posted May 19, 2009 I'm interested. Could you post pics of each kit when you get 'em. I'm a little confused by the verbage. Quote Link to comment Share on other sites More sharing options...
jolyrgr Posted May 19, 2009 Author Report Share Posted May 19, 2009 (edited) I'm interested. Could you post pics of each kit when you get 'em. I'm a little confused by the verbage. KIT 2 is fully represented in the first pic. This has a clear cover and silver banjo fittings. In the second pic...I took a line from each kit. KIT 1 in in silver(one blue banjo, one silver. This kit will have the same color on both ends), KIT 2 is in black, KIT 3 is in red. Each kit has (2) lines and all the appropriate fittings and washers. I hope this helps. JR Edited May 19, 2009 by jolyrgr Quote Link to comment Share on other sites More sharing options...
dmyers151 Posted May 19, 2009 Report Share Posted May 19, 2009 That clarifies perfectly, thanks JR. Quote Link to comment Share on other sites More sharing options...
alp247 Posted May 19, 2009 Report Share Posted May 19, 2009 I think this is what i have been looking for. Are these the ones that connect to the housing on the Oil filter because i think mine are leaking so i was looking for some replacements. If so i am down for the clear SS style. What we need...Two, right? Quote Link to comment Share on other sites More sharing options...
Lives4Speed Posted May 19, 2009 Report Share Posted May 19, 2009 Very Nice Guys! :thumbsup: L4S Quote Link to comment Share on other sites More sharing options...
jolyrgr Posted May 19, 2009 Author Report Share Posted May 19, 2009 I think this is what i have been looking for. Are these the ones that connect to the housing on the Oil filter because i think mine are leaking so i was looking for some replacements. If so i am down for the clear SS style. What we need...Two, right? One kit will completely replace both lines. All I need to know is color and which ends you would like on the lines. The 3 different kits show the different hose end combinations offered. JR Quote Link to comment Share on other sites More sharing options...
slowquest Posted May 20, 2009 Report Share Posted May 20, 2009 Kit 3 in blue please. I'll also probably be looking at at least one more kit, but not real soon. Quote Link to comment Share on other sites More sharing options...
jd_stazza_brendan Posted May 20, 2009 Report Share Posted May 20, 2009 JR is a legend....... Quote Link to comment Share on other sites More sharing options...
PDodson Posted May 20, 2009 Report Share Posted May 20, 2009 hey JR Ill take Kit 3 in red please I am sure kit 3 will flow better than kit 1 and 2 with the banjo bolts??? Quote Link to comment Share on other sites More sharing options...
jolyrgr Posted May 20, 2009 Author Report Share Posted May 20, 2009 hey JR Ill take Kit 3 in red please I am sure kit 3 will flow better than kit 1 and 2 with the banjo bolts??? The new bolts have 3 cross holes in them instead of 2, so they should flow about the same. They will definitely flow better than stock. JR Quote Link to comment Share on other sites More sharing options...
alp247 Posted May 20, 2009 Report Share Posted May 20, 2009 Well count me in with the SS and black ends. PM price for one kit and shipping to 95133 Quote Link to comment Share on other sites More sharing options...
jolyrgr Posted May 20, 2009 Author Report Share Posted May 20, 2009 Well count me in with the SS and black ends. PM price for one kit and shipping to 95133 They do look kinda black in the pic, but I only have blue and silver available. Sorry. JR Quote Link to comment Share on other sites More sharing options...
alp247 Posted May 20, 2009 Report Share Posted May 20, 2009 No prob blue it is then. Quote Link to comment Share on other sites More sharing options...
Big Al Posted May 20, 2009 Report Share Posted May 20, 2009 (edited) I'll be looking at a set of these if you do a GP after nats. BTW YOU ARE THE DEVIL! Just when I think I'm done doing stuff to my engine, you've got to go and put something like this out. Edited May 20, 2009 by Big Al Quote Link to comment Share on other sites More sharing options...
BC_99 Posted May 20, 2009 Report Share Posted May 20, 2009 I'll take kit #3 in SS. You keepin a count on this for a GP? BTW the brake and clutch slave cyl lines looked and worked great. Thanks. BC_99 Quote Link to comment Share on other sites More sharing options...
gt40dude Posted May 20, 2009 Report Share Posted May 20, 2009 what is the reason for having the 90 degree fittings on some of the lines? and how come these are so much less expensive than the other ss lines like on ebay and tep? thanks, ben Quote Link to comment Share on other sites More sharing options...
BC_99 Posted May 20, 2009 Report Share Posted May 20, 2009 what is the reason for having the 90 degree fittings on some of the lines? and how come these are so much less expensive than the other ss lines like on ebay and tep? thanks, ben The 90 deg fittings flow better than a stock banjo. the 3 hole banjo will probably be about the same as Jolyrgr stated. As for the pricing.....I dont know...all the lines I bought from him have been top notch thus far. BC_99 Quote Link to comment Share on other sites More sharing options...
jolyrgr Posted May 21, 2009 Author Report Share Posted May 21, 2009 what is the reason for having the 90 degree fittings on some of the lines? and how come these are so much less expensive than the other ss lines like on ebay and tep? thanks, ben The different configurations are purely for trying to satisfy the needs/wants of everyone. Some like the flow characteristics of the 90 deg elbow over the banjo, while others like the ease of access the banjo provides. I just tried to cover all the bases. As for the price, I like to think it is because we are less greedy than the others. :biggrinumbrella1: Honestly, we do a lot of business with this company, and because of that we can get a decent deal on the lines. The main goal here is to provide quality at a cost effective level. There is just enough mark-up in the lines to cover the costs involved with handling and providing the product. Anything extra (LOL) typically goes into developing the next offering. Plus, what is the point in offering the same thing at the same price, if we can't benefit the community in some way, there is no use wasting everyone's time. JR (the prices can be raised if it would make you feel better) :hmm3grin2orange: Quote Link to comment Share on other sites More sharing options...
jolyrgr Posted May 22, 2009 Author Report Share Posted May 22, 2009 You keepin a count on this for a GP? BC_99 I missed this the first time. I was watching this for a few days to see if the interest was there for a gp. I talked to the manufacturer, and I can get a price break starting as low as 10 sets (regardless of color/style). I will tally up tomorrow, and either send out PM on payment, or move to the GP section with a deadline. If anyone is needing right away, let me know and I will get them coming immediately. JR Quote Link to comment Share on other sites More sharing options...
Jms Posted May 22, 2009 Report Share Posted May 22, 2009 Interested in Kit 1, all in silver. Rgds, Jms Quote Link to comment Share on other sites More sharing options...
jszucs Posted May 22, 2009 Report Share Posted May 22, 2009 Ill take kit 3 with black lines and silver ends. Not to sound stupid but do the 90* ends thread right into the oil filter adapter or do we have to tap them? Quote Link to comment Share on other sites More sharing options...
BC_99 Posted May 22, 2009 Report Share Posted May 22, 2009 The 90 deg end kit should come with fittings that screw into the stock ports and the 90 fittings screw onto those. Jolyrgr, correct me if Im wrong on that, they are -6 AN type fittings, correct? Quote Link to comment Share on other sites More sharing options...
jolyrgr Posted May 23, 2009 Author Report Share Posted May 23, 2009 The 90 deg end kit should come with fittings that screw into the stock ports and the 90 fittings screw onto those. Jolyrgr, correct me if Im wrong on that, they are -6 AN type fittings, correct? Yes..if you look at the pic, you can see the adapter fittings. the fittings screw into the cooler/manifold and the 90 deg end screws onto that. The line and the fittings are -6. Quote Link to comment Share on other sites More sharing options...
toofast Posted May 23, 2009 Report Share Posted May 23, 2009 Can you add me to the list for #3 in red please :hmm3grin2orange: and when is payment going to be required?thanks,Gary Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.