hello i have an 89 dodge spirit r/t clone 2.5 8 valve . has .42 / .63 turbo 3/18/28 ft mount innercooler 5 speed with 6 puck sepc clutch lowwered 3 inch exaust from turbo to rear bumper custom short throw shifter recaro ft seats 3 year old paint custom cal 22 psi on pump gas . poly motor and trans mts custom innercooler pipes with moded talon blow-off valve still has a/c have about 6500.. in it so not looking for a big project . looking to trade for a nice clean close to stock car. thanks for r

Hey guys my 88 is is being really annoying. I rebuilt my rear calipers and did my brakes and now my hand brake isn't grabbing. I tried adjusting it at the handle and nothing changed. I tried looking around the site to see if there was anything posted similar to this but I couldn't find anything. Any help will be greatly appreciated. Thanks in advance

There is an 89 at pick and pull... It has a 5 speed that I don't need ( mines and auto ) but it has shp front and rears, half shafts, rear end and torque tube etc...plus various other parts   Motor is gone but radiator is still there and appears to be in good order...   What would y'all pull just for spares?

I've heard a lot of people showing interest or asking about these lately, so I decided to add another product to the list of other things I sell, and make these too.   I just need a little input from PEOPLE WHO MAY ACTUALLY WANT THESE to figure out the best design.   If you don't like splitters on cars, then DON'T leave your input, that's not the sort of input I'm looking for.   What I'm trying to figure out is what materials to make these out of, and if y'all want a 1 piece design or 2 piece.