I no longer need this. It's less than a year old with light usage. It comes with every thing (controller, harness, Map sensor, and solenoid) but the user manual ( I have no idea where I put it but the .pdf can be downloaded on line) I'm going to utilize my AEM EMS's Boost control circuitry and my new turbo's built in Boost control solenoid so to keep things even simpler.   $320 takes it.

my older panasonic CT36D20B is giveing me fits , start'd going black and dead after say a week,, then it'd happen every few days , it'l go dead and come right back on some times, some times it'l take 5 min 20 min who knows , some times if you snap your fingers it'l pop on,, other times a super light tap on the frt close to the #3 componet input connectors (on frt of tv ) and it'l come back on,, other times simply incerting an RCA connector into the vedio input wll turn it back on   90% of t

http://www.tripletsandus.com/80s/80s_games/supermariobrothers.htm     More challenging than I thought it was gonna be.

So I finally replaced the heater core. Did the mod on the heater box for the single pull diaphragm. I turned the key on. Didn't start the car. The air would only come out of the dash. I was crushed. I was positive I did things correctly. So I turned the key off and sat in the car for a few. After a few my brain started working and I thought that vacuum is needed. So I started the car and things worked properly. I was relieved. I was hoping to not to have to take the dash out again. I will cry if