Jump to content

    caravan heads

    doomstr
    By doomstr,
    Im planning on putting a caravan head on my quest soon and was wondering if there is anything I should know first. I plan on using my quest cam. Otherwise it should be a direct bolt on right?? I might possibly do a little port matching while Im at it.

    Magna intake and Holley injectors part numbers

    Boosted_One
    By Boosted_One,
    I just got an email from Darryl Horn who stated this about the Holley injector fitment on the AU Magna MPI intake     I still will be going with the Holley 75lbers, here is a list of the part numbers. Cheaper prices can be had at www.summitracing.com on these injectors. Just enter the part number.   Thank you Darryl for your continued input on the FI and intake.   ---------------------------------------------------------------------------------------   Holley Fuel Injectors       Fee

    page top

    starion_t
    By starion_t,
    I wish the top of the page would put insted of scrollin. especially the forum index tree and the site menu ;) later TOM

    Steering wheel adj will not stay locked

    BuzzKill
    By BuzzKill,
    To correct this, pull the knob all the way out. Clamp down onto the metal shaft, just behind the knob with some vice grips. Bend the shaft to the left a little - it will feel like it might break, but it won't. You're only trying to bend it 1/8 of an inch or so. What I did was bend it a little, then test, bend a little more test again, etc.   I've done this on 3 StarQuests so far and it works like a charm every time.

Portal by DevFuse · Based on IP.Board Portal by IPS
×
×
  • Create New...