I've commited to a R&P swap on my red car, so I don't need this. Not sure of the mileage on the car, but this coupler looks perfect. No movement whatsoever, no signs of perishing rubber. The Boot is torn however, so you'd need to use your old one. I had to nick the barrel with a grinder to debur it to get the smaller outer pins out when I took it off the column, but apart from that, it was pretty easy to remove.   I'm after $50US, plus $20US Shipping. Shipping is pricey because I'm on the ot

Hello guys i have a custom made wiring harness it uses a 90 eagle talon ecu and cam sensor it was used for a mpi swap on an 87 starion it comes with the full harness to run with your own mpi manifold Has been wired with an innovative lc1 wideband and also has the wiring necessary to run an aftermarket tach comes wired with 2g maf sensor uses all of the necessary sensors from a 90 eagle talon such as cam Sensor knock sensor mpi injector relay and a few other sensors only sensor that is missing i

Hello guys i have a custom made wiring harness it uses a 90 eagle talon ecu and cam sensor it was used for a mpi swap on an 87 starion it comes with the full harness to run with your own mpi manifold Has been wired with an innovative lc1 wideband and also has the wiring necessary to run an aftermarket tach comes wired with 2g maf sensor uses all of the necessary sensors from a 90 eagle talon such as cam Sensor knock sensor mpi injector relay and a few other sensors only sensor that is missing i

I have a passenger and drivers side fender that are both rust free and off of an 87 starion never even had bondo used on them id like 150 a piece plus shipping just contact me at 3144432749 for pics Or id take 250 for the pair