Got it installed today. Look at the pics below.   I am REALLY happy with it. I had to cut off about an inch off the left side because the shield was made around a LARGE 1.15 A/R housing. It was hitting the flange to header area before I cut it.   I am going to have him take off another inch on the left side. Other than that I think this thing is a go!   Other than not having HK$ bragging rights this shield is every bit as good.   Look over the pics and give me your feedback.   http://a7.

Can anyone tell me the length of replacement line needed?  Thanks in advance!

Can some tell me exactly how this modification is performed. I found a MAF sensor at the yard the other day.

I installed a Perma Cool Six Pass oil cooler with a fan unit. It measures 3.75H x 10.5W x 14L. I had to remove the third fan that is mounted against the air conditioner evaporation coil and heavily modify that fan's bracket and the core support. This thing is huge compared to the factory unit. My lines burst on the factory unit so instead of having them rebuilt I installed this bigger cooler and adapted oil hose from Surpluscenter.com to work with the Banjo fittings on the pump. I will likely wi