Jump to content


  • Posts

  • Joined

  • Last visited

Everything posted by BluFalcon16G

  1. I've got a Bill Hincher Adapter Plate that will allow a GM 4L60E Automatic Transmission to mate up with a Narrow Block Mitsubishi 4G63 Engine. This was part of a 4G63 RWD Swap package that I bought for my car, buy decided to use a standard Transmission. The Adapter Plate is brand new and includes a Spacer to mate the 6 Bolt 4G63 crank to a GM Flex Plate. Brand new Bosch Starter, Pinion Gear, Hardware and Flex Plate. Transmission was removed from a running 91 Buick Roadmaster and includes torque converter. Was told Transmission is completely stock and worked fine before removal. Parts are located on Haysville KS and would prefer to sell as a set. Pickup Only. Will not ship.
  2. Got a black leather seat bottom, and multiple black door panels. Could probably ship the door panel, but not sure about the seat bottom.
  3. Awesome. That's what I wanted to know. Thanks!
  4. Got a 88 Conquest with blown shocks, front and rear on stock springs. Ordered a set of the Mk1 Front and Rear struts for my car and was wondering if there would be any issues with using my stock springs with them. Someone local mentioned that they they were designed specifically for lowered cars with lowering springs. Just wanted to know if that was the actual case and if they'd work with stock springs instead.
  5. Was told there are only about 44 StarQuest windshields left in the U.S. after I ordered one through vintageglass.com in Florida. Hopefully I actually get my glass.๐Ÿ˜
  6. Just in case you aren't on Book Face. https://www.facebook.com/114124830280/posts/10159621852180281/
  7. Got three uncracked Exhaust Manifolds available from the ones pictured. One unfortunately appears to have been repaired previously.
  8. I was thinking spacers would be the way to go. Now, I just need to actually go through with this.๐Ÿ˜
  9. Got a 89 Roller in my backyard that's kind of rough. It's fairly complete and I'd hate to strip it down for parts. Was thinking of doing a "rally" build out of it. How would one go about adding additional lift to the car? Spacers on top of the strut tops? Can coilovers be extended to provide additional lift? Any mods needed for the control arms? Just a idea I was throwing around.
  10. Got a few uncracked stock Exhaust Manifolds up for sale. Asking $100 each, shipped in CONUS. Parts located in Wichita area for local pickup.
  11. Running a PLX Wideband with the sensor in the factory location, and a simulated narrowband signal from the controller to the ECU. Need to do something similar with mine once I take my car to the exhaust shop and have them fix the Mookeeh Catback Exhaust fitment.
  12. This is the one I was using with my aftermarket downpipe. Bosch 12053 One wire, unheated sensor with connector and screw in threads. https://www.amazon.com/dp/B007XB8UHE/ref=cm_sw_r_apan_glt_fabc_XXF8WA711CXNS32ZW8DH
  13. Clark, I bought a Bosch replacement O2 Sensor for my car awhile back. Threads in like a normal 02 Sensor with a factory plug. I'll see if I can get a part number for you.
  14. Amayama.com shows the Fuel Pickup Tube Gasket available for order from a overseas dealership. I ordered one and a Fuel Pickup Filter for my car earlier this year. Shipping is a killer, but I did get my parts.
  15. I'd kill for a set of Quick Jack's right now. I'm old, with a angled driveway. The jackstands and floor jacks work, but I really don't like using them. Something like a Quick Jack that picks up on the pinch weld or factory jack points seems like a better idea than, "Well I hope this spot is strong enough to use with the jackstand."
  16. Was wondering why I couldn't seem to reply to a topic the other day. Didn't know I needed to be bumped up out of rookie status.
  17. BluFalcon16G

    88 Durban Quest

    My 88 Durban Maroon Conquest 5 Speed
  • Create New...