Who makes engine mounts??

[Funky Phil]

I need some stiff engine mounts NOW!! Who makes em or who has a set they wanna throw at me?? Mine torques so hard Im breaking stuff.

 

phil

[JAinsworth]

Phil,

Get in touch with 83TechMaster. He has a nice and easy setup to help the motor mounts last.

Jimmy

[ucw458]

Just use a torque strap like the V8 guys do. I've seen people use just a chain but you can get more elaborate/pretty than that if you want. It's just a metal strap that only allows your engine to move as far as you let it.

[Casey_L]

Click Here

 

Hey I would be happy to make you a set of these.

http://lh4.ggpht.com/_VUaI7bsfmok/SoYyhC5pDlI/AAAAAAAABps/MKL16hgG5vc/s512/untitled.jpg

 

P.M. me if you are interested. I have a jig all made up for them, lead time would be one week. Will come powder-coated black. I can get more pictures, the ones in that GP thread do not show the quality of the weld.

[Funky Phil]

I thought someone made some poly mounts??

[Convette]

poly diff mounts would be huge also

[kozmikkroozer]

The only ones I know of are the Stedebani mounts.

There were 2 variations - The red and the black.

Red are reportedly to hard at 95 durometer and will vibrate your teeth out.

and the Black one's at 85 durometer.

 

It's been several years since I've spoken with Steve so the info may be wrong but here's what I have:

Stedebani Enterprise Co, Inc.

1239 Coastal Highway

US Route 98

Panacea, FL 32346

 

Orders only: 1-877-566-9222

Tech/ business phone: 850-984-3500

 

I just replaced mine with stock - parts #'s

Right motor mount MB309031

Left motor mount MB309030

[Edde]

Just use a torque strap like the V8 guys do. I've seen people use just a chain but you can get more elaborate/pretty than that if you want. It's just a metal strap that only allows your engine to move as far as you let it.

 

This ^^

 

 

Click Here

 

Hey I would be happy to make you a set of these.

http://lh4.ggpht.com/_VUaI7bsfmok/SoYyhC5pDlI/AAAAAAAABps/MKL16hgG5vc/s512/untitled.jpg

 

P.M. me if you are interested. I have a jig all made up for them, lead time would be one week. Will come powder-coated black. I can get more pictures, the ones in that GP thread do not show the quality of the weld.

 

Or this ^^

[Indiana]

Are you using the upper plates on both sides? If those are there then how are they moving so far as to tear? If that is still happening just modify that plate for a hard stop.

 

right side mount with heat shield bolt

http://cgi.ebay.com/ebaymotors/Motor-Mount-1987-1989-Chrysler-Conquest-2-6-Front-Lef_W0QQitemZ270447931945QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item3ef7f3f229&_trksid=p4506.m20.l1116

 

left side mount

http://cgi.ebay.com/ebaymotors/Motor-Mount-1983-1985-Dodge-D50-POWER-RAM-50-RAM-50-2_W0QQitemZ270458438328QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item3ef89442b8&_trksid=p4506.m20.l1116

 

W R O N G to only use this part, they WILL fail

http://cgi.ebay.com/ebaymotors/Motor-Mount-1987-1989-Chrysler-Conquest-2-6-Front-Rig_W0QQitemZ270458424946QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item3ef8940e72&_trksid=p4506.m20.l1116

 

When the motor tries to TILT the plate the mount is bonded to HITS that upper bracket and prevents the bond from being broken. That plate has to be there and how many threw it away, lost it or didn't think it was needed? Does your car have it? If that isn't enough of a lip then weld on more metal but that plate is curved on the end and the mount comes up and bangs in to it if the bond is broken so further limit the movement some how.