uconn1150 Posted February 29 Report Share Posted February 29 Hello all, As 245s are hard to come by, do I just put 225s all the way round, or go with 205's in front? Thanks Quote Link to comment Share on other sites More sharing options...
psu_Crash Posted March 1 Report Share Posted March 1 SHP or not wheels? I believe 205 was factory in the non SHP fronts. Not 100% sure on that though. It's early and I'm still on coffee #1 Personally I will always run a staggered setup. It came that way, so I keep it that way. Not that there is anything wrong with 225 all around. Quote Link to comment Share on other sites More sharing options...
1SICDSM Posted March 1 Report Share Posted March 1 i have non shp wheels i run 225/50 in front and 245/50 in rear. general rs. the 245/50 in rear gives you more options in tires Quote Link to comment Share on other sites More sharing options...
nc_beagle Posted March 2 Report Share Posted March 2 I have 245/50 in the rear but 245/45 was actually SHP stock wasn't it? Quote Link to comment Share on other sites More sharing options...
Alpina_Blue Posted March 2 Report Share Posted March 2 Factory SHP tire sizes were: 225/50/16 front 245/45/16 rear Those were some pretty wide rear tires for 1988/1989 Quote Link to comment Share on other sites More sharing options...
psu_Crash Posted March 3 Report Share Posted March 3 Good deal on those Bridgestone Potenza 245/45r16 https://www.tirerack.com/tires/TireSearchResults.jsp?zip-code=37322&width=245/&ratio=45&diameter=16&rearWidth=225/&rearRatio=50&rearDiameter=16&performance=ALL 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.