ucw458 Posted September 4, 2013 Report Share Posted September 4, 2013 Here's my setup. I found the USB bulkhead that comes with the EMS-4 was perfect to mount in the kick panel. Easy access and with the dust cover you don't notice it unless you are looking for it. http://i463.photobucket.com/albums/qq352/ucw458/MPI/DSC03834.jpg http://i463.photobucket.com/albums/qq352/ucw458/MPI/DSC03835.jpg I found a USB bulkhead that the rest of you could use to have the same easy USB access. The cable costs $5.39 and is 1.6 feet long so it will easily reach your ECU. http://www.newark.com/multicomp/2ub3001-w05102/usb-cable-micro-usb-a-plug-usb/dp/20T7283 http://www.newark.com/productimages/nio/standard/4766259.jpg Link to comment Share on other sites More sharing options...
taeisallin Posted September 4, 2013 Report Share Posted September 4, 2013 awesome man!! genius. Link to comment Share on other sites More sharing options...
Funky Phil Posted September 4, 2013 Report Share Posted September 4, 2013 Nice! Link to comment Share on other sites More sharing options...
tux Posted September 4, 2013 Report Share Posted September 4, 2013 i mounted my EMS-4 in the exact same manner! the only problem was the fuse blocks, i just jammed them behind the gold stock mounting bracket Link to comment Share on other sites More sharing options...
ucw458 Posted September 4, 2013 Author Report Share Posted September 4, 2013 i mounted my EMS-4 in the exact same manner! the only problem was the fuse blocks, i just jammed them behind the gold stock mounting bracket I mounted my fuse block higher so when you fold the glove box all the way down you can access it. Link to comment Share on other sites More sharing options...
jszucs Posted September 4, 2013 Report Share Posted September 4, 2013 That's pretty cool. Could have other uses too, like if you run an onboard PC, or tablet for media, it would make a clean access port where you don't have to worry about access to the PC or tablet ports then. Link to comment Share on other sites More sharing options...
tux Posted September 10, 2013 Report Share Posted September 10, 2013 I mounted my fuse block higher so when you fold the glove box all the way down you can access it. Ah I can't do that with the MASS of wires running up there. Link to comment Share on other sites More sharing options...
creakyjoints Posted September 10, 2013 Report Share Posted September 10, 2013 Serial gauge. Good idea though. Link to comment Share on other sites More sharing options...
Recommended Posts