importwarrior Posted March 13, 2014 Report Share Posted March 13, 2014 please let me know when you have some more ready to ship.just to be sure. this includes the sensor as well as the install hardware.? 1 Quote Link to comment Share on other sites More sharing options...
StockRaider Posted March 14, 2014 Report Share Posted March 14, 2014 I am down for the kit when your back in stock!! I def want this upgrade!!! Quote Link to comment Share on other sites More sharing options...
Rubadub88 Posted March 16, 2014 Report Share Posted March 16, 2014 You can put me down for one my stock tps just kicked the bucket Quote Link to comment Share on other sites More sharing options...
speedyquest Posted March 16, 2014 Report Share Posted March 16, 2014 I see your doing well with these adapters Mini, I bought one of your original ones and have praised it ever since installing it. Keep up the great work, and thanks for supporting the starquest community. Allen 1 Quote Link to comment Share on other sites More sharing options...
boostinmini Posted March 17, 2014 Author Report Share Posted March 17, 2014 hey guys i have six kits available, i have had so many pms I can not keep track of how many peolpe all asked for them. If you still need one please pm me, it will be first come first serve at this point. Thanks for your patience Quote Link to comment Share on other sites More sharing options...
boostinmini Posted March 18, 2014 Author Report Share Posted March 18, 2014 Hey guys..ended up have ten kits ready.... Four sold all ready Three kits pending Three kits left and one just adapter and hardware still need to find a sensor for it. These are selling faster then I can find sensors. Pm if interested. Mike 1 Quote Link to comment Share on other sites More sharing options...
boostinmini Posted March 24, 2014 Author Report Share Posted March 24, 2014 Just a update I have three kits left and once they are gone could be another month before I get any more done. 1 Quote Link to comment Share on other sites More sharing options...
CarlosFley Posted March 24, 2014 Report Share Posted March 24, 2014 So what are the benefits of upgrading the TPS over our good working stock one? Quote Link to comment Share on other sites More sharing options...
boostinmini Posted March 24, 2014 Author Report Share Posted March 24, 2014 It has better response..I think most people buy then cause the original one is a ticking time bomb Quote Link to comment Share on other sites More sharing options...
t-rexn8 Posted March 24, 2014 Report Share Posted March 24, 2014 The Mazda TPS is built better and seems to have better resolution. Plus they are readily available. The stock TPS is mostly plastic and are known for wearing out around or before 100k miles. Almost getting to be a "must have" in my opinion. Quote Link to comment Share on other sites More sharing options...
CarlosFley Posted March 24, 2014 Report Share Posted March 24, 2014 Ahh I see... I'll start considering one then. Thanks guys. Quote Link to comment Share on other sites More sharing options...
8687tsiwidebody Posted March 24, 2014 Report Share Posted March 24, 2014 I'll take one!!!! Pm'd!!!! Quote Link to comment Share on other sites More sharing options...
boostinmini Posted March 27, 2014 Author Report Share Posted March 27, 2014 still have a couple left Quote Link to comment Share on other sites More sharing options...
boostinmini Posted March 31, 2014 Author Report Share Posted March 31, 2014 Two kits left...might be a month before I get to making more... Quote Link to comment Share on other sites More sharing options...
boostd92 Posted April 2, 2014 Report Share Posted April 2, 2014 Here is the adapter mounted on the TB mixer. Nice O-ring mount. You will want tocut a piece of the included adhesive foam and stick it behind the adapter to coverthe small gap between the adapter and the stock mount. I finally got mine! (took 2.5 weeks ... stupid customs)... The above part I don't get... I haven't taken it apart yet, but where does the foam go exactly? Any pics of installing/cutting the foam? Quote Link to comment Share on other sites More sharing options...
boostd92 Posted April 2, 2014 Report Share Posted April 2, 2014 (edited) I figured out where the foam goes, but I'm having an issue.... Please tell me how i messed this up, but I can't get the Mazda TPS to work.... From what I can see, it looks like the screws for to mount the adapter onto the TB, and the screws to mount the TPS to the adapter are backwards... They came pre-installed and one is a counter sunk internal hex, so you CAN'T change their orientation.. However, I can't get 0.50v at idle with this the way it is. As you can see in the picture below, my SQ's throttle blade tab is almost halfway between the posts for the Mazda sensor. When installed this way, the Mazda sensor reads 3.4v at SQ idle speed (key on, engine off, ISC unplugged after returning from initial zip, and ground wire run from nose switch to body ground to simulate idle to the ECU as per the TPS reset instructions). It's physically in the wrong spot. I pulled the mazda TPS sensor and manually moved the potentiometer, and it can reach 0.50v easily, and at what looks at the right position (at the far end of the adjustment range). Either I effed up the install, or the adapter is mounting this particular Mazda sensor (supplied to me with the adapter) in the wrong spot. FWIW, the Mazda sensor boostinmini sent me is the "alternate" one with the pink/brown/oranges wire as shown in the wiring diagram FUZE posted. Anyone? http://i59.tinypic.com/2ewnrx2.jpg Edited April 2, 2014 by boostd92 Quote Link to comment Share on other sites More sharing options...
speedyquest Posted April 2, 2014 Report Share Posted April 2, 2014 You probably have the adapter plate on incorrectly or something. I do remember having to deduce the correct orientation when installing it to have it work correctly also. I'm sure with a bit of messing around or talking with boostedmini you will get it right. Allen Quote Link to comment Share on other sites More sharing options...
cheesey Posted April 2, 2014 Report Share Posted April 2, 2014 Think I had this happen and I had some wires crossed. Quote Link to comment Share on other sites More sharing options...
boostinmini Posted April 2, 2014 Author Report Share Posted April 2, 2014 Hey your little arm looks like it is pointing the wrong way should be approx 2 o clock like in the link https://www.dropbox.com/sc/0b9bn9xulbgr0qu/fuUCMp80Yg Quote Link to comment Share on other sites More sharing options...
boostd92 Posted April 2, 2014 Report Share Posted April 2, 2014 It is pointed at 2 o'clock. The picture I posted is a mirror image so you could see how it lines up with the Mazda TPS. And regarding wires crossed, they are not. and that's not the problem. As boostin pointed out, the idle position of the factory throttle will leave the arm pointing at 2 o'clock. The Mazda TPS idle position (0.5v) is at approx 9 o'clock when installed on minis adapter. I thought maybe I put the adapter in wrong but it can only go two ways and they are mirrors of each other so it wouldn't matter which way I was put in. I'm stumped. Unless the Mazda TPS I got came off a car with a different mounting position Quote Link to comment Share on other sites More sharing options...
boostinmini Posted April 3, 2014 Author Report Share Posted April 3, 2014 TPS RECALL...ONLY TEN MOST RECENT ONES EFFECTED. Hey guys As much as I hate to say this the ten most recent adapters i made are incorrect Please do not attempt to install them I need to make another batch and mail then to you free of charge but it takes about thirty to forty hours to make a batch on top of a full time job I will be spending all my free time to correct this Please e mail me at miketeierle@Gmail.com if you are effected.. Attached is the direction they should be in the picture https://www.dropbox.com/sc/8zns3dvyqttp09t/uGV9lAw-gh Once again I apologize this has cost me huge Quote Link to comment Share on other sites More sharing options...
Draggin_Quest Posted April 8, 2014 Report Share Posted April 8, 2014 Sorry to hear. Does that mean the 2 you had left for sale are bad as well? I am in need of one of these when you have one available. Thanks. Quote Link to comment Share on other sites More sharing options...
MTQuest Posted April 9, 2014 Report Share Posted April 9, 2014 As am I.... If you do still have two left, ( or one left after draggin_quest) Ill take it. After the recall fix that is. Quote Link to comment Share on other sites More sharing options...
boostinmini Posted April 10, 2014 Author Report Share Posted April 10, 2014 Hey guys Changing things up a little there will be more for sale soon but of course after all the recall customers got there own. Quote Link to comment Share on other sites More sharing options...
MTQuest Posted April 10, 2014 Report Share Posted April 10, 2014 Ill keep an eye out then. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.