jabbott126 Posted May 9, 2013 Author Report Share Posted May 9, 2013 bluetooth connector and im running shadow dash on the tablet. They said they should have an app out soon for tuning purposes tho Link to comment Share on other sites More sharing options...
CaliConquestAlex Posted May 9, 2013 Report Share Posted May 9, 2013 I've been mulling the idea over of getting a cheap android tablet for tuning purposes, but I'm worried that if I have a problem, I wouldn't have a computer nearby to troubleshoot via usb to serial port adapter. I'll most likely end up with a small netbook stored in the car for tuning purposes with a 12V car charger. Link to comment Share on other sites More sharing options...
psu_Crash Posted May 10, 2013 Report Share Posted May 10, 2013 I'm sure there is a way to setup bluetooth to communicate with ms just like a serial port using the rs 232 to bluetooth adapter. One of these days I find some time to play around with it. may require some third party program but there must be a way. I'm currently using shadowlogger too Link to comment Share on other sites More sharing options...
RonnieJ Posted May 10, 2013 Report Share Posted May 10, 2013 (edited) Im running 1.25" Wheel Adaptors from Adapt-IT-USA its a 5x144.3 to 5x120 to fit the old school BBS's http://i1063.photobucket.com/albums/t508/jabbottonline/375072_10151466390929401_1632994645_n_zpsaf6aa543.jpg What size are your tires? PS you need these caps http://store.blackfo...srelocafor.html http://www.r3vlimited.com/board/attachment.php?attachmentid=59520&stc=1&d=1346158345 Edited May 10, 2013 by RonnieJ Link to comment Share on other sites More sharing options...
jabbott126 Posted May 10, 2013 Author Report Share Posted May 10, 2013 Its a 245 40 rear and a 215 40 front i kinda wanted alittle bigger but the tires i got are super sticky so hopefully i shouldnt have many issues Link to comment Share on other sites More sharing options...
RonnieJ Posted May 29, 2013 Report Share Posted May 29, 2013 Teaser from Sat http://jdlautodesign.net/wp-content/uploads/2013/05/SQ-Holset-and-Gates.jpg http://jdlautodesign.net/wp-content/uploads/2013/05/StarQuest-Top-Mount_1.jpg Link to comment Share on other sites More sharing options...
jabbott126 Posted May 29, 2013 Author Report Share Posted May 29, 2013 Looking good ronnie keep up the good work. On a side note the head showed up today and it looks great It has 3.3l beehive springs and ls retainers i dont think anyone had run this setup on a g54b head before so im testing the waters here Link to comment Share on other sites More sharing options...
RonnieJ Posted May 30, 2013 Report Share Posted May 30, 2013 Moar. Bandsaw blade bent so off to get a new one in the AM http://jdlautodesign.net/wp-content/uploads/2013/05/StarQuest-Topmounttttt_3.jpg http://jdlautodesign.net/wp-content/uploads/2013/05/StarQuest-Topmounttttt_1.jpg http://jdlautodesign.net/wp-content/uploads/2013/05/StarQuest-Topmounttttt_2.jpg Link to comment Share on other sites More sharing options...
jabbott126 Posted May 30, 2013 Author Report Share Posted May 30, 2013 :o :o Ohhhhhhhhhhhhhhhh So Beautiful! Link to comment Share on other sites More sharing options...
jabbott126 Posted May 30, 2013 Author Report Share Posted May 30, 2013 M28 njv head ported by Ed Kelly 3.3L turbo dodge springs and LS retainers http://i1063.photobucket.com/albums/t508/jabbottonline/971200_10151515057904401_1876283051_n_zps8c4d3912.jpghttp://i1063.photobucket.com/albums/t508/jabbottonline/971042_10151515057279401_1393553830_n_zpsae299b09.jpghttp://i1063.photobucket.com/albums/t508/jabbottonline/969701_10151515058389401_462538233_n_zpsb349653b.jpghttp://i1063.photobucket.com/albums/t508/jabbottonline/397382_10151515057999401_91363959_n_zps9d2eb286.jpghttp://i1063.photobucket.com/albums/t508/jabbottonline/181275_10151515057579401_385686656_n_zps9eac8746.jpg Link to comment Share on other sites More sharing options...
RonnieJ Posted May 30, 2013 Report Share Posted May 30, 2013 Working on the gates and dumps http://jdlautodesign.net/wp-content/uploads/2013/05/StarQuest-Hot-Parts-_1.jpg http://jdlautodesign.net/wp-content/uploads/2013/05/StarQuest-Hot-Parts-_2.jpg Link to comment Share on other sites More sharing options...
taeisallin Posted May 31, 2013 Report Share Posted May 31, 2013 Nice!!!! That's beautiful work. Might have to jump on the bandwagon. How long does one take after the order? Link to comment Share on other sites More sharing options...
RonnieJ Posted May 31, 2013 Report Share Posted May 31, 2013 Everything is done and getting welded. Here is a gate shot from ealier http://jdlautodesign.net/wp-content/uploads/2013/05/StarQuest-Hot-Parts-_3.jpg Link to comment Share on other sites More sharing options...
RonnieJ Posted May 31, 2013 Report Share Posted May 31, 2013 Nice!!!! That's beautiful work.Might have to jump on the bandwagon. How long does one take after the order? We are pretty busy at the moment. Shoot me a PM and ill see what we can do Link to comment Share on other sites More sharing options...
jabbott126 Posted June 3, 2013 Author Report Share Posted June 3, 2013 Down Pipe and Dump tubes finished up http://i1063.photobucket.com/albums/t508/jabbottonline/StarQuest-Hot-Partsssss_1_zpsdba47c26.jpg http://i1063.photobucket.com/albums/t508/jabbottonline/StarQuest-Hot-Partsssss_zps120759ca.jpg Link to comment Share on other sites More sharing options...
quickStarion Posted June 3, 2013 Report Share Posted June 3, 2013 Why does the porting look like sandpaper rather than silk? Or is it a camera angle? Link to comment Share on other sites More sharing options...
nugget43 Posted June 3, 2013 Report Share Posted June 3, 2013 Why does the porting look like sandpaper rather than silk? Or is it a camera angle?A little rough is acctually better on the intake side supposedly it will mix the fuel and air better. however the exauhst side should be smooth as possible (as far as i know). Either way flow bench resaults have proven a little rough give better resaults than smooth. Mike Link to comment Share on other sites More sharing options...
jabbott126 Posted June 4, 2013 Author Report Share Posted June 4, 2013 Yeah I was surprised by the grit on the port as well and i looked into it and this was the best explanation i could find "There is also the issue of "surface boundary layer." Air is sticky. It likes to stick to itself and it also sticks to other materials. With a smooth surface that creates little turbulence the air flowing along the surface of the tube tends to stick to it and slow down . It also sticks to other air flowing by and slows it down creating a gradual transition from the slowest air next to the surface toward the fastest air in the center of the tube. A rough surface can create a thin layer of turbulence just above the surface of the tube. This tends to create a sharp transition between the totally chaotic air next to the surface and the rest of the air that flows through the tube relatively unhindered. The effect is to increase the overall average velocity of air that does flow through the tube. However, the boundary layer reduces the effective cross-section of the tube and, thereby, the total effective volume." Link to comment Share on other sites More sharing options...
RonnieJ Posted June 5, 2013 Report Share Posted June 5, 2013 Collector and runners welded just didnt get too many pics today. Crazy busy at the shop. Will have it all done and ported tomorrow http://jdlautodesign.net/wp-content/uploads/2013/05/StarQuest-Collector.jpg Link to comment Share on other sites More sharing options...
iFREAKNiK Posted June 5, 2013 Report Share Posted June 5, 2013 What ever happened to the DIY MS2 part? I've done the same thing and am worried about the tune - Link to comment Share on other sites More sharing options...
jabbott126 Posted June 5, 2013 Author Report Share Posted June 5, 2013 Haven't gotten to making it yet i want the motor in the car so i can length check all my wires for my harness. Motor should be done this weekend hopefully, then all that's felt is wiring it up and it will be ready to go. Link to comment Share on other sites More sharing options...
RonnieJ Posted June 7, 2013 Report Share Posted June 7, 2013 Yours is the front right http://jdlautodesign.net/wp-content/uploads/2013/06/StarQuest-Collector_1.jpg Link to comment Share on other sites More sharing options...
jabbott126 Posted June 7, 2013 Author Report Share Posted June 7, 2013 Nice looks good ronnie cant wait to get it on the car. Got my motor back together just gotta throw on the timing stuff and she will be good to go http://i1063.photobucket.com/albums/t508/jabbottonline/936150_10151528671604401_431855501_n_zps7190abef.jpg http://i1063.photobucket.com/albums/t508/jabbottonline/7798_10151528671434401_75299536_n_zps97a68b05.jpg Link to comment Share on other sites More sharing options...
RonnieJ Posted June 7, 2013 Report Share Posted June 7, 2013 Finishing up product shots then ill have it on its way to you Link to comment Share on other sites More sharing options...
RonnieJ Posted June 10, 2013 Report Share Posted June 10, 2013 All ported http://jdlautodesign.net/wp-content/uploads/2013/06/StarQuest-Top-Mount-Div.jpg Ready to roll. Hurry up fedex http://jdlautodesign.net/wp-content/uploads/2013/06/StarQuest-Top-Mount-Div-Kit-Boxed.jpg Link to comment Share on other sites More sharing options...
Recommended Posts