25 plus shipping..........can email pictures....just need e mail address............

Showed up today and its looks like a rocket scientist designed them and better than stock !!!!!!!!!!!!!!!!!! worth every buck......thanks Britt for making these for SQC........Get them while u can !!!!!!!!!!!!!!!!!!!!!

I've had the manifolds off my car more times than I can remember. The exhaust manifold studs always turn out of the head instead of the nut coming off the stud in my experience. I'd like to have those studs stay in place since I'm sure it isn't doing the head threads any favors. Several heads and manifolds through the years and always the same story. Anytime I pull the manifold I replace the lock nuts and washers with new OEM parts. Studs get changed every few times.   Any of you have a secret t

Hi guys,   I had posted in my restoration thread that I suspected my TPS was bad, and I still believe that unit was, when I would check resistance across the sensor, moving it back to the "idle" position resulted in an inconsistent reading when attempted multiple times. I bought a Mazda TPS kit from Boostinmini (quality hardware, highly recommend), and installed it using this graphic:   http://i.imgur.com/aJ4AoFN.jpg   So I get it all together, and I'm still getting somewhat erratic voltage read