prep and paint condition no rust or dents. complete with all three inserts. local sale only sorry. so. california. can text pics if interested. $500.00

discovered sat eve the ground wire that screw into the lower mount for the ECU on the kick panel was loose.that was the primary problem of the wiring harness it seems.once started it ran crappy so I decided to swap around injector connectors.with just the primary it will barely run.had troublke w the primary injector before so no surprise,will sawp in my new set when get the weird issue fixed.I unplugged the primary and and it sputtered a bit then cleared up nice and ran pretty smooth on the se

Got 4 different ones. napa, carquest. 2 from autozone, lifetime warranty. spec says opens between 184-196f. this opens at 192f and194F. almost same as stock high sensor. car now runs at 3/4 gauge hot before starting fan. before at 1/3 of gauge. never above 1/2. cracked the head when i got it that hot in traffic. the new high temp ones open at 203-toast.   The car has NO wiring issues or bad grounds, just a sensor that opens at too high a temp. (in water on stove)   called the manufacturers. they

I need of an ISC/MPS assembly. Will consider complete throttle body. Must be in working order. Must fit 1988 Conquest. FOUND!