Jump to content

    Parting out my 89 all high performance parts

    marcel
    By marcel,
    This is what i have left from my 89 2jz conversion. everything i have is in perfect condition. ST sway bars-200 F/R Strut bars-200 F/R Gauge pod-70 All the black interior -400 Brand new radio and 4 speakers -300 Front end conversion with finer glass hood and projector lights With front air dam-2200 Brand new 17in center line rims with new Yokohama S drive tires-1500 Doors-150 each Fenders-100 each Wilwood big front brake kit-1000 with SS lines 2jz motor and trans mounts-400

    x5 Northwest Indiana and beyond meet. year 4.

    wrngwae
    By wrngwae,
    Ok, its time. August 17. at my home again. Bring the family or friends. we will try and schedule another cruise by the lake and am currently working on some door prizes. (no guarantee). I have plenty of parking and will provide all the food and drinks. if,,,,,,,we do have prizes,,,,, there may be a donation jar for the prizes and the prizes only. myself and Duckheads (Greg) will not qualify for any. here are what im trying to get   1. longest traveled. 2. most stock. 3. most modified. 4. cleane

    RPM Noise on MSII After Startup

    jonboyb
    By jonboyb,
    Have a little issue for the first 45-60 seconds after cold startup on my latest MS project. This is a fuel only setup using MSII V3.0 and firmware 3.2.x (can't remember the "x" off top of my head but whatever DIY has been using for the past year or so) with TunerStudio 2.0.8. For the first 45-60 seconds ONLY AFTER COLD START my RPM signal goes from smooth idle at around 900 to a quick blip off the chart (10k+) and back to smooth idle. It blips about every 2 seconds and then after maybe a minu

    Flash Flood gets my house and shop :( pics up

    MainstreaM
    By MainstreaM,
    The heavy rains Wednesday night along with heavy logging and rock gathering in the mountains caused a flash flood in South Pittsburg. My house got it on the north end of town and my shop got it on the south end. The house received damage to my AC and duct work plus the fence got mashed flat. Fortunately it was all fixable with only heavy duty cleaning and I moved my cars to higher ground before it got bad. Here is what I posted to the facebook. ​ My shop is a different story. 18 inches of w

Portal by DevFuse · Based on IP.Board Portal by IPS
×
×
  • Create New...