PURCHASED A CROSSMEMBER FROM HIM---PART AS ADVERTISED--GOOD PRICE AND GOOD COMMUNICATION---WOULD PURCHASE FROM AGAIN GIG OUT

well, I got this cheap conquest and all these turbo's laying around and a little bit of extra time. Really just want to see which is my favorite for the street.   I first made this old car run good. love boost the way it was made to.... with a good (95psi max) fuel pump. 89 ecu wastegate held shut as long as possible   This is what i ended up with and seemed to max out around 14 psi boost.   http://i778.photobucket.com/albums/yy68/jaybirdskate/hp1_zps6ae83f19.jpg     Then I honed out a compress

Going to replace my fuel pump and saw the Airtex and the Denso are favorites on Rock Auto.   Did a little digging and saw that the Airtex got nothing but bad reviews about short live and bad noises.   Does anyone use the Denso? I'm concerned about the whine from a Walbro, that's why I haven't considered one - the car has just a downpipe back exhaust and 10psi on a stock turbo. I don't plan to go any bigger than a 16G down the line (if at all).

So i used to turn the key and it would start in 5 seconds. I'm chasing a mystery oil leak so I decreased and washed my engine bay the other evening. Low water pressure and carefully where i sprayed. On the drive home I had a couple misfire and stumble moments. Figured water in distributor cap. Went away quickly. Now this morning it takes almost 30 seconds of cranking for it to start. Happens every time. Hot or cold engine. Any ideas?