Hi- today (Sunday 3/23) an '88 Starion was crashed into by a fleeing car theft suspect and split in half. The driver of the Starion walked away with just a bloody lip, but the two suspects are in critical condition. Hope this wasn't anybody on the list, but either way it's sad when a Starquest is removed from service   http://www.miamihera...njured-car.html   -Bill B.

This radiator was running on my starion it is modified to run with the cooling system on our cars just might have to figure what hose you can use I believe it will work with stock hoses but not sure I'll have to find the hoses I used if I do they will come with it and it also has an aftermarket electric fan attached just message me at 3144432749 for pics and price is $100 plus shipping

All you need for MPI or TBI Total Engine Control (TEC). Came to me in a parts bundle, I've taken the time to clean it up, check all the wiring, power up the ECU, comm with the ECU, load the tuning software onto my laptop and desktop to ensure it still loads and label the harness. It's EVERYTHING you need including made for Starquest 60-2 trigger wheel on a Starquest crank pulley, made for Starquest crank trigger that mounts to the timing case, twin coil wasted spark ignition system, 3-bar GM M

This is an unknown brand intercooler with a knock off greddy blow off valve and piping and the mounting brackets Uses tbolt clamps instead of hose clamps this was running on an mpi swapped station with a holsett turbo all the plumbing is 3 inch I believe if not 3 inch its 2.5 inch and this IS NOT BOLT ON UNLESS YOU HAVE A HOLSETT HX35 TURBO AND IF YOU HAVE THE RIGHT MPI MANIFOLD BUT THIS CAN EASILY BE MODIFIED TO WORK ON A NON MPI CAR all you would need is a reducer coupler for the stock turbo a