The true 100% accurate way to figure fuel injector sizing is the following...   Naturally aspirated formula... Divide required HP by # of Injectors used - (200 hp / 4 inj) = 50 hp per inj. (50hp x .50 BSFC) = 25 lbs/hr (25 lb/hr / .80% Duty Cycle) = 31.25 lbs/hr Static flow rate   Forced induction BSFC is gonna be .60 or higher   Laters,   Brian     PS If you're not good at math like me, here's a nice guide that'll help you calculate your injectors.  Just scroll down till you find the

Ok, when I got the car, the radio and anything related to the radio was gone, this including all the speakers.  What's left is this big gaping hole in front of the shift lever!!!  It's just a hole with nothing, not even brackets, wires sticking out from everywhere and don't know which wire goes to what!   Now, I'd like to venture into installing a nice decent head unit and I really don't know where to get started!  All there is the radio trim bezel surround with the small pocket underneathe and

--

I'm starting the restore on an 89 quest this spring. I would like to start purchasing some parts now. What's the best OEM supplier for these cars?