Jump to content

    Amother MPI on the road, pics

    Jonathan
    By Jonathan,
    Well I finished the install of my Magna and SDS system. Word of advice for anyone is to take your time and think things through. Nothing really bad for me just reversed the gaskets and had to take everything off! Got the idle tuning down good and smooth.   Here are the pictures. I am running the SDS em4d with 750 cc injectors, t3/t4 bb turbo, 2.5 exhaust, etc. Also I am using the 89 coolant housing not the 87. All you have to do is cut a little off the hose and it will fit fine with the intake

    Knob cleaning

    zactek
    By zactek,
    I'm using the stock radio and the knobs for the Front/Rear and Left/Right are scratchy (can hear them thru the speakers) when I turn them. Can I use TV tuner cleaner and directly spray into the knobs or will I damage something? I just put in some new rear 100W Pioneers ($12 a pair on E-bay!!!) ;Dand I want to get the balance right, but these knobs are driving me up the wall!!! >   Thanks a lot, Zack ;D

    Fuel system upgrade. How to...

    artinist
    By artinist,
    When upgrading the turbo or just raising boost beyond 14 psi it is essential to upgrade the fuel deliver system to be able to provide enough fuel to take advantage of the extra air and to prevent leaning out.   here is what you need:   I. Fuel pump   A) Walbro fuel pump. GSL 392 ~ $120-135 the installation kit includes a couple of brass fittings, a couple of electric connectors and a rubber sleeve. its up to you if you want to get these on your own from the local hardware store for a few dol

    sactownusa AKA Rey E.

    kev
    By kev,
    I purchased a bov off of Rey E. (sactownusa).   He was an excellent seller.   The product was in even better condition than he mentioned, he shipped it promptly, and it showed up on my door in only 2 days (CA to PA - 2500 miles!).     I would recommend anyone to buy/sell from this guy.   kev

Portal by DevFuse · Based on IP.Board Portal by IPS
×
×
  • Create New...