Hydraulic Lifter Preloading Instructions   Preload Definition: Amount of travel placed on the lifter hydraulic, OFF of the cam lobe, or lash check position of lobe. The lifter hydraulic will travel a maximum of .125”. However, some of that travel is taken up even when the lifter is off of the lobe and on the backside of the cam. The amount of that travel is the “preload” that is always putting pressure on the lifter. Cam Swap: Use the factory service manual to swap out the camshafts. If

Anyboby got the mitsu part number for the stock rear isolators? Or any suggestions for aftermarket replacement? A thousand thank you in advance. j5

deleted

deleted