brianpaul98 Posted June 18, 2010 Author Report Share Posted June 18, 2010 (edited) HERE'S AN UPDATE FOR ANYONE LOOKING TO DO THE GM MAF / MAF-T CONVERSION This is the MAF I would use right here http://feedback.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewFeedback2&userid=fwd4g63&&sspagename=VIP:feedback&ftab=FeedbackAsSeller and since there is only one of them listed just keep an eye on this seller. E-BAY Member ID - idfwd4g63 I got two of my GM MAF's from him and he lists a new one after every auction so DON'T GO CRAZY bidding or your just going to push the price up. If it goes past $25.00 just hang back and wait for the next one... Or if you want go for it... I waited and got both of mine for around $20.00 http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=300438647574 Look at his feedback, some dumba s s bid one up to $42.00 and another bidder got one for $15.00 just days before. MANY of them are selling for right around $15.00 and I wouldn't waste my time going to a bone yard for under $25.00. As you can see they sell from anywhere between $15.00 and $65.00 so I would NOT bid until the last seconds. LC-1 Innovate Wideband - The best price I found is here http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250644515702 E-BAY SELLER ID - poor-boy-parts http://myworld.ebay.com/ebaymotors/poor-boy-parts/ An alternative to the MAF-T (black box) and APEXi SAFC2 http://www.fullthrottlespeed.com/itemdesc.asp?ic=050transgen2 If anyone has any input on this let us know as I've never used one or know anyone who has this unit. It can translate and is a AFC in one. NEW MAFT Gen 2 This new version of the MAF Translator is a dramatic new upgrade from the regular unit. Borrowing technology from the Translator Pro, the Gen 2 now has the ability to adjust fuel + or - 60% in 1/2% steps across 14 RPM bands in 3 different load areas! We have also added our "wideband tracking" technology to this unit. You can connect any popular wideband that has a 0-5 volt output on the controller and then you can set the desired A/F ratio across the RPM band at WOT. The Gen 2 will then track A/F and automatically adjust the fuel to keep the desired ratio. If the car leans out, the Gen 2 will add fuel and if the car runs rich it will remove fuel. If this unit works as stated it will save you about $150.00 compared to buying each unit separatly PLUS this MAF-T GEN2 can automatically adjust the fuel curve. BIG PLUS. Ok, hope this helps. Edited June 18, 2010 by brianpaul98 Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted June 19, 2010 Author Report Share Posted June 19, 2010 Hey brian, I'm ready to make an order with you now. Sorry it took longer than expected. If I can get a total cost from you I will send you paypal as soon as I know. Thanks,Sam Hello Sam, it will take me too long to go back through all the posts so please refresh my memory on what we talked about and send it to me at my main e-mail lower.shores.performance@gmail.com All you need to do is send me your Paypal e-mail address and I will get an invoice out to you ASAP. Take careBrian Quote Link to comment Share on other sites More sharing options...
smallblock12 Posted June 19, 2010 Report Share Posted June 19, 2010 Got my injectors. They work great and super fast shipping. Thanks a lot brian! Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted June 19, 2010 Author Report Share Posted June 19, 2010 Got my injectors. They work great and super fast shipping. Thanks a lot brian! Nothing better than another happy customer If you need anything else just let me know. Quote Link to comment Share on other sites More sharing options...
lester Posted July 7, 2010 Report Share Posted July 7, 2010 Hi Brian I am from Singapore and I need a set of replacements. What is the postage from normal air mail through USPS? i have got Paypal but it is an unconfirmed address. My addy is block 372, Clementi Avenue 4, #11-280, Singapore 120372. Let me know what is the cost for the set of stock replacement and the postage. Thanks. Quote Link to comment Share on other sites More sharing options...
Wattle Posted July 10, 2010 Report Share Posted July 10, 2010 I would like to order right away. But i have not driven my car yet, so i don't know what size to get, and it is completely factory. would it be wise to move up a step to bigger cc's? Quote Link to comment Share on other sites More sharing options...
Wattle Posted July 10, 2010 Report Share Posted July 10, 2010 I have worked out a deal with a company for the Delphi fuel injectors for our cars. They are a 650cc primary and a 950cc secondary direct bolt in replacement without having to modify the mixer housing meaning they are already machined to fit. The price will be $150.00 plus shipping and Paypal or $162.00 shipped. PLEASE BE AWARE THAT THESE DELPHI INJECTORS CANNOT BE PAIRED WITH THE FACTORY STOCK MITSUBISHI FUEL INJECTORS. THE DEPHI INJECTOR'S ARE ABOUT A 1/4" TALLER SO THE UPPER FUEL RAIL WILL NOT MOUNT UP PROPERLY. The sizes that available are 650cc, 750cc, 780cc, 850cc, 950cc, 1050cc, 1150cc, 1200cc and 1600cc. Size ----------- Cost 650cc ----------- $70.00 ea.750cc ----------- $70.00 ea.780cc ----------- $70.00 ea.850cc ----------- $70.00 ea.950cc ----------- $80.00 ea.1050cc ---------- $85.00 ea.1150cc ---------- $90.00 ea.1200cc ---------- $100.00 ea. (Bosch)1400cc ---------- $106.50 ea. (Bosch)1600cc ---------- $115.00 ea. (Bosch) ALL THESE INJECTORS COME WITH A 3 YEAR MANUFACTURER REPLACEMENT WARRANTY Anyone interested speak now or forever be looking for used injectors... WHEN YOU ARE READY TO PURCHASE THE INJECTOR KIT PLEASE SEND ME YOUR PAYPAL E-MAIL ADDRESS AND I WILL SEND YOU AN INVOICE UPDATE : If your actual shipping address is not the same as your Paypal address please have it updated before sending payment. I WILL NOT SHIP TO AN UNCONFIRMED ADDRESS OR ANY ADDRESS OTHER THAN WHAT IS LISTED ON THE PAYPAL PAYMENT INVOICE.[/b] If you don't have a Paypal account USPS money orders ONLY are also accepted. Here are some pictures for you to see them installed in my fuel rail and mixer housing. http://i917.photobucket.com/albums/ad20/brianarnone2009/injectors1.jpg http://i917.photobucket.com/albums/ad20/brianarnone2009/MixerAssembly1.jpg http://i917.photobucket.com/albums/ad20/brianarnone2009/MixerAssembly2.jpg http://i917.photobucket.com/albums/ad20/brianarnone2009/MixerAssembly3.jpg I'VE DECIDED TO SWEETEN THE DEAL A LITTLE MORE SO I HAVE ADDED TO THE GP THESE SUPER SEXY STAINLESS STEEL BUTTON HEAD ALLEN BOLTS FOR THE UPPER FUEL RAIL, PULSATION DAMPER AND THE FUEL LINE. http://i917.photobucket.com/albums/ad20/brianarnone2009/MixerBolts021.jpg http://i917.photobucket.com/albums/ad20/brianarnone2009/MixerBolts029.jpg http://i917.photobucket.com/albums/ad20/brianarnone2009/MixerHousing006.jpg PLEASE REMEMBER TO LEAVE FEEDBACK WHEN YOU GET YOUR INJECTORS INSTALLED MY FEEDBACK LINK I am ready to order rite away! do U know the shipping and receiving time? I would like to go a one up if you think it would be safe for my completely stock 89 tsi.thank You MIke Wattle Quote Link to comment Share on other sites More sharing options...
89questzilla69 Posted July 10, 2010 Report Share Posted July 10, 2010 I have worked out a deal with a company for the Delphi fuel injectors for our cars. They are a 650cc primary and a 950cc secondary direct bolt in replacement without having to modify the mixer housing meaning they are already machined to fit. The price will be $150.00 plus shipping and Paypal or $162.00 shipped. PLEASE BE AWARE THAT THESE DELPHI INJECTORS CANNOT BE PAIRED WITH THE FACTORY STOCK MITSUBISHI FUEL INJECTORS. THE DEPHI INJECTOR'S ARE ABOUT A 1/4" TALLER SO THE UPPER FUEL RAIL WILL NOT MOUNT UP PROPERLY. The sizes that available are 650cc, 750cc, 780cc, 850cc, 950cc, 1050cc, 1150cc, 1200cc and 1600cc. Size ----------- Cost 650cc ----------- $70.00 ea.750cc ----------- $70.00 ea.780cc ----------- $70.00 ea.850cc ----------- $70.00 ea.950cc ----------- $80.00 ea.1050cc ---------- $85.00 ea.1150cc ---------- $90.00 ea.1200cc ---------- $100.00 ea. (Bosch)1400cc ---------- $106.50 ea. (Bosch)1600cc ---------- $115.00 ea. (Bosch) ALL THESE INJECTORS COME WITH A 3 YEAR MANUFACTURER REPLACEMENT WARRANTY Anyone interested speak now or forever be looking for used injectors... WHEN YOU ARE READY TO PURCHASE THE INJECTOR KIT PLEASE SEND ME YOUR PAYPAL E-MAIL ADDRESS AND I WILL SEND YOU AN INVOICE UPDATE : If your actual shipping address is not the same as your Paypal address please have it updated before sending payment. I WILL NOT SHIP TO AN UNCONFIRMED ADDRESS OR ANY ADDRESS OTHER THAN WHAT IS LISTED ON THE PAYPAL PAYMENT INVOICE.[/b] If you don't have a Paypal account USPS money orders ONLY are also accepted. Here are some pictures for you to see them installed in my fuel rail and mixer housing. http://i917.photobucket.com/albums/ad20/brianarnone2009/injectors1.jpg http://i917.photobucket.com/albums/ad20/brianarnone2009/MixerAssembly1.jpg http://i917.photobucket.com/albums/ad20/brianarnone2009/MixerAssembly2.jpg http://i917.photobucket.com/albums/ad20/brianarnone2009/MixerAssembly3.jpg I'VE DECIDED TO SWEETEN THE DEAL A LITTLE MORE SO I HAVE ADDED TO THE GP THESE SUPER SEXY STAINLESS STEEL BUTTON HEAD ALLEN BOLTS FOR THE UPPER FUEL RAIL, PULSATION DAMPER AND THE FUEL LINE. http://i917.photobucket.com/albums/ad20/brianarnone2009/MixerBolts021.jpg http://i917.photobucket.com/albums/ad20/brianarnone2009/MixerBolts029.jpg http://i917.photobucket.com/albums/ad20/brianarnone2009/MixerHousing006.jpg PLEASE REMEMBER TO LEAVE FEEDBACK WHEN YOU GET YOUR INJECTORS INSTALLED MY FEEDBACK LINK i would like a 1200 a 1400 and a 950 so im lookn at 286.5 how do i send to ya and how long will it take to get them to maryland? Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted July 10, 2010 Author Report Share Posted July 10, 2010 Hi Brian I am from Singapore and I need a set of replacements. What is the postage from normal air mail through USPS? i have got Paypal but it is an unconfirmed address. My addy is block 372, Clementi Avenue 4, #11-280, Singapore 120372. Let me know what is the cost for the set of stock replacement and the postage. Thanks. PM Sent Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted July 11, 2010 Author Report Share Posted July 11, 2010 I am ready to order rite away! do U know the shipping and receiving time? I would like to go a one up if you think it would be safe for my completely stock 89 tsi.thank You MIke Wattle I recommend you stick with the 650cc / 950cc injectors and believe me they will go a lot farther than you think when you start doing mods. If you go any bigger on a stock setup your going to start having drivability issues unless you install an AFC and wideband to adjust your air fuel ratios. I have the 650cc / 950cc injectors and they will be ready to ship out on Monday. Shipping is USPS Priority mail so you'll receive them in approximately 3-4 business days depending on where you are located. Send me your Paypal e-mail address and I will get an invoice out to you asap. Brian Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted July 11, 2010 Author Report Share Posted July 11, 2010 (edited) i would like a 1200 a 1400 and a 950 so im lookn at 286.5 how do i send to ya and how long will it take to get them to maryland? I have the 950cc and the 1400cc injectors in stock but I don't have the 1200cc on hand right now. They are not a high demand injector so I only had one in stock and sold it a few weeks ago. It would just take a few days to get them in and no time at all to machine it for you so its no big deal. I do need to ask what you are doing with them because the Delphi's (950cc) are not the same design as the Bosch (1200cc and 1400cc) so knowing what your up to really helps. The cost breakdown is : 950cc - $80.001200cc - $100.001400cc - $106.50__________________________ Total - $286.50 Shipping - $4.95 (USPS Priority Mail) Paypal Fee - $8.45__________________________ Total Shipped - $299.90 Ok, copy all this and reply back to me at lower.shores.performance@gmail.com and let me know the details on your setup so I can get everything going asap. Edited July 11, 2010 by brianpaul98 Quote Link to comment Share on other sites More sharing options...
Wattle Posted July 11, 2010 Report Share Posted July 11, 2010 I recommend you stick with the 650cc / 950cc injectors and believe me they will go a lot farther than you think when you start doing mods. If you go any bigger on a stock setup your going to start having drivability issues unless you install an AFC and wideband to adjust your air fuel ratios. I have the 650cc / 950cc injectors and they will be ready to ship out on Monday. Shipping is USPS Priority mail so you'll receive them in approximately 3-4 business days depending on where you are located. Send me your Paypal e-mail address and I will get an invoice out to you asap. BrianOk, Thanks man, I will try to figure out my paypal stuff and email it to you. Quote Link to comment Share on other sites More sharing options...
Wattle Posted July 11, 2010 Report Share Posted July 11, 2010 Ok, Thanks man, I will try to figure out my paypal stuff and email it to you. I just got on to my pay pal account, do you want the email address that is linked with my account." my Gmail account?" I have been looking for something on pay pal showing a different email account than my personal one, and cant' find one. I thought you might know since it sounds like you deal with this often. When i do find it where should i send it to? your email on your profile? This is my personal email linked to my pay pal if this is what you want. mwattle@gamil.comThanks for responding so quicklyMike Quote Link to comment Share on other sites More sharing options...
Wattle Posted July 11, 2010 Report Share Posted July 11, 2010 I recommend you stick with the 650cc / 950cc injectors and believe me they will go a lot farther than you think when you start doing mods. If you go any bigger on a stock setup your going to start having drivability issues unless you install an AFC and wideband to adjust your air fuel ratios. I have the 650cc / 950cc injectors and they will be ready to ship out on Monday. Shipping is USPS Priority mail so you'll receive them in approximately 3-4 business days depending on where you are located. Send me your Paypal e-mail address and I will get an invoice out to you asap. BrianOk i read all the directions on paypal and i think this is what you need. mwattle@gmail.comThanks againMike Wattle Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted July 11, 2010 Author Report Share Posted July 11, 2010 Ok i read all the directions on paypal and i think this is what you need. mwattle@gmail.comThanks againMike Wattle Hello Mike, I just read your posts and what I need would be the e-mail address that you enter when you log into your Paypal account. I'll get the invoice out to you right now and just let me know when it goes through. Quote Link to comment Share on other sites More sharing options...
Wattle Posted July 12, 2010 Report Share Posted July 12, 2010 (edited) Hello Mike, I just read your posts and what I need would be the e-mail address that you enter when you log into your Paypal account. I'll get the invoice out to you right now and just let me know when it goes through. Cool! Then it is the one that I thought it was then. mwattle@gmail.comThanks Brian Edited July 12, 2010 by Wattle Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted July 12, 2010 Author Report Share Posted July 12, 2010 Cool! Then it is the one that I thought it was then. Mwattle@gmail.comThanks Brian Hello Mike, I already sent you the invoice so it should be in your actual g-mail now. G-mail is like instant with Paypal. Ok, I'll have them ready to go out and they will ship out after the payment posts. Quote Link to comment Share on other sites More sharing options...
Wattle Posted July 12, 2010 Report Share Posted July 12, 2010 Hey Brian I sent the payment. U should see it all readyThanks manMike Wattle Quote Link to comment Share on other sites More sharing options...
89questzilla69 Posted July 14, 2010 Report Share Posted July 14, 2010 I have the 950cc and the 1400cc injectors in stock but I don't have the 1200cc on hand right now. They are not a high demand injector so I only had one in stock and sold it a few weeks ago. It would just take a few days to get them in and no time at all to machine it for you so its no big deal. I do need to ask what you are doing with them because the Delphi's (950cc) are not the same design as the Bosch (1200cc and 1400cc) so knowing what your up to really helps. The cost breakdown is : 950cc - $80.001200cc - $100.001400cc - $106.50__________________________ Total - $286.50 Shipping - $4.95 (USPS Priority Mail) jus need some extra fuel jus did a rebuild and i am gettn a mon banshee cam and will be addn more boost need more fuel i have good afr's now at 21 psi but want more till i go mpi Paypal Fee - $8.45__________________________ Total Shipped - $299.90 Ok, copy all this and reply back to me at lower.shores.performance@gmail.com and let me know the details on your setup so I can get everything going asap. Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted July 14, 2010 Author Report Share Posted July 14, 2010 Your reply didn't seem to go through. Quote Link to comment Share on other sites More sharing options...
BC_99 Posted July 15, 2010 Report Share Posted July 15, 2010 Hey Brian, I called you yesterday about a set for Davids 88 TSI. Need the 650/950 set shipped to 28027 in Concord, NC. Shoot me an invoice for em when you get a second. bc_7474742001@yahoo.com Thanks, BrittBC_99 Quote Link to comment Share on other sites More sharing options...
FLATBROKE313 Posted August 17, 2010 Report Share Posted August 17, 2010 Hey brian wonder if you could give me a price on stock replacment 680 and 950 shipped to mi 48043 thanks Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted August 17, 2010 Author Report Share Posted August 17, 2010 Hey brian wonder if you could give me a price on stock replacment 680 and 950 shipped to mi 48043 thanks They stock replacement injectors are $162.00 shipped through USPS Priority Mail. Email me your Paypal address at : lower.shores.performance@gmail.com and I will get an invoice out to you. Take careBrian Quote Link to comment Share on other sites More sharing options...
FLATBROKE313 Posted August 18, 2010 Report Share Posted August 18, 2010 K will email friday payment will be friday thanks Quote Link to comment Share on other sites More sharing options...
kush_life Posted August 18, 2010 Report Share Posted August 18, 2010 (edited) I am in the market for some injectors, looking for your suggestion, 87 conquest,stock 87 ecu /no aftermarket fuel management (in the market for 88-89 ecu)complete hard pipesRewired 1g intakeMSD coil, plugs wires2.5 catless back currently (3in exhaust to be installed)and a newly purchased 18g turbo I am looking to run higher boost and hoping to make decent powerI understand I will need to get a new higher flowing fuel pump,BUT* what can I safely run without flooding my engine/ or what do i need to manage the larger injectors that you suggest safely... sorry for all the mickey mouse BS.. any helps appreciated Thanks Edited August 18, 2010 by kush_life Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.